From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/tests/shell/daemon.sh | 487 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 487 insertions(+) create mode 100755 tools/perf/tests/shell/daemon.sh (limited to 'tools/perf/tests/shell/daemon.sh') diff --git a/tools/perf/tests/shell/daemon.sh b/tools/perf/tests/shell/daemon.sh new file mode 100755 index 000000000..45fc24af5 --- /dev/null +++ b/tools/perf/tests/shell/daemon.sh @@ -0,0 +1,487 @@ +#!/bin/bash +# daemon operations +# SPDX-License-Identifier: GPL-2.0 + +check_line_first() +{ + local line=$1 + local name=$2 + local base=$3 + local output=$4 + local lock=$5 + local up=$6 + + local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'` + local line_base=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $3 }'` + local line_output=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $4 }'` + local line_lock=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $5 }'` + local line_up=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $6 }'` + + if [ "${name}" != "${line_name}" ]; then + echo "FAILED: wrong name" + error=1 + fi + + if [ "${base}" != "${line_base}" ]; then + echo "FAILED: wrong base" + error=1 + fi + + if [ "${output}" != "${line_output}" ]; then + echo "FAILED: wrong output" + error=1 + fi + + if [ "${lock}" != "${line_lock}" ]; then + echo "FAILED: wrong lock" + error=1 + fi + + if [ "${up}" != "${line_up}" ]; then + echo "FAILED: wrong up" + error=1 + fi +} + +check_line_other() +{ + local line=$1 + local name=$2 + local run=$3 + local base=$4 + local output=$5 + local control=$6 + local ack=$7 + local up=$8 + + local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'` + local line_run=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $3 }'` + local line_base=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $4 }'` + local line_output=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $5 }'` + local line_control=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $6 }'` + local line_ack=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $7 }'` + local line_up=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $8 }'` + + if [ "${name}" != "${line_name}" ]; then + echo "FAILED: wrong name" + error=1 + fi + + if [ "${run}" != "${line_run}" ]; then + echo "FAILED: wrong run" + error=1 + fi + + if [ "${base}" != "${line_base}" ]; then + echo "FAILED: wrong base" + error=1 + fi + + if [ "${output}" != "${line_output}" ]; then + echo "FAILED: wrong output" + error=1 + fi + + if [ "${control}" != "${line_control}" ]; then + echo "FAILED: wrong control" + error=1 + fi + + if [ "${ack}" != "${line_ack}" ]; then + echo "FAILED: wrong ack" + error=1 + fi + + if [ "${up}" != "${line_up}" ]; then + echo "FAILED: wrong up" + error=1 + fi +} + +daemon_exit() +{ + local config=$1 + + local line=`perf daemon --config ${config} -x: | head -1` + local pid=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $1 }'` + + # Reset trap handler. + trap - SIGINT SIGTERM + + # stop daemon + perf daemon stop --config ${config} + + # ... and wait for the pid to go away + tail --pid=${pid} -f /dev/null +} + +daemon_start() +{ + local config=$1 + local session=$2 + + perf daemon start --config ${config} + + # Clean up daemon if interrupted. + trap "echo 'FAILED: Signal caught'; daemon_exit ${config}; exit 1" SIGINT SIGTERM + + # wait for the session to ping + local state="FAIL" + local retries=0 + while [ "${state}" != "OK" ]; do + state=`perf daemon ping --config ${config} --session ${session} | awk '{ print $1 }'` + sleep 0.05 + retries=$((${retries} +1)) + if [ ${retries} -ge 600 ]; then + echo "FAILED: Timeout waiting for daemon to ping" + daemon_exit ${config} + exit 1 + fi + done +} + +test_list() +{ + echo "test daemon list" + + local config=$(mktemp /tmp/perf.daemon.config.XXX) + local base=$(mktemp -d /tmp/perf.daemon.base.XXX) + + cat < ${config} +[daemon] +base=BASE + +[session-size] +run = -e cpu-clock -m 1 sleep 10 + +[session-time] +run = -e task-clock -m 1 sleep 10 +EOF + + sed -i -e "s|BASE|${base}|" ${config} + + # start daemon + daemon_start ${config} size + + # check first line + # pid:daemon:base:base/output:base/lock + local line=`perf daemon --config ${config} -x: | head -1` + check_line_first ${line} daemon ${base} ${base}/output ${base}/lock "0" + + # check 1st session + # pid:size:-e cpu-clock:base/size:base/size/output:base/size/control:base/size/ack:0 + local line=`perf daemon --config ${config} -x: | head -2 | tail -1` + check_line_other "${line}" size "-e cpu-clock -m 1 sleep 10" ${base}/session-size \ + ${base}/session-size/output ${base}/session-size/control \ + ${base}/session-size/ack "0" + + # check 2nd session + # pid:time:-e task-clock:base/time:base/time/output:base/time/control:base/time/ack:0 + local line=`perf daemon --config ${config} -x: | head -3 | tail -1` + check_line_other "${line}" time "-e task-clock -m 1 sleep 10" ${base}/session-time \ + ${base}/session-time/output ${base}/session-time/control \ + ${base}/session-time/ack "0" + + # stop daemon + daemon_exit ${config} + + rm -rf ${base} + rm -f ${config} +} + +test_reconfig() +{ + echo "test daemon reconfig" + + local config=$(mktemp /tmp/perf.daemon.config.XXX) + local base=$(mktemp -d /tmp/perf.daemon.base.XXX) + + # prepare config + cat < ${config} +[daemon] +base=BASE + +[session-size] +run = -e cpu-clock -m 1 sleep 10 + +[session-time] +run = -e task-clock -m 1 sleep 10 +EOF + + sed -i -e "s|BASE|${base}|" ${config} + + # start daemon + daemon_start ${config} size + + # check 2nd session + # pid:time:-e task-clock:base/time:base/time/output:base/time/control:base/time/ack:0 + local line=`perf daemon --config ${config} -x: | head -3 | tail -1` + check_line_other "${line}" time "-e task-clock -m 1 sleep 10" ${base}/session-time \ + ${base}/session-time/output ${base}/session-time/control ${base}/session-time/ack "0" + local pid=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $1 }'` + + # prepare new config + local config_new=${config}.new + cat < ${config_new} +[daemon] +base=BASE + +[session-size] +run = -e cpu-clock -m 1 sleep 10 + +[session-time] +run = -e cpu-clock -m 1 sleep 10 +EOF + + # TEST 1 - change config + + sed -i -e "s|BASE|${base}|" ${config_new} + cp ${config_new} ${config} + + # wait for old session to finish + tail --pid=${pid} -f /dev/null + + # wait for new one to start + local state="FAIL" + while [ "${state}" != "OK" ]; do + state=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` + done + + # check reconfigured 2nd session + # pid:time:-e task-clock:base/time:base/time/output:base/time/control:base/time/ack:0 + local line=`perf daemon --config ${config} -x: | head -3 | tail -1` + check_line_other "${line}" time "-e cpu-clock -m 1 sleep 10" ${base}/session-time \ + ${base}/session-time/output ${base}/session-time/control ${base}/session-time/ack "0" + + # TEST 2 - empty config + + local config_empty=${config}.empty + cat < ${config_empty} +[daemon] +base=BASE +EOF + + # change config + sed -i -e "s|BASE|${base}|" ${config_empty} + cp ${config_empty} ${config} + + # wait for sessions to finish + local state="OK" + while [ "${state}" != "FAIL" ]; do + state=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` + done + + local state="OK" + while [ "${state}" != "FAIL" ]; do + state=`perf daemon ping --config ${config} --session size | awk '{ print $1 }'` + done + + local one=`perf daemon --config ${config} -x: | wc -l` + + if [ ${one} -ne "1" ]; then + echo "FAILED: wrong list output" + error=1 + fi + + # TEST 3 - config again + + cp ${config_new} ${config} + + # wait for size to start + local state="FAIL" + while [ "${state}" != "OK" ]; do + state=`perf daemon ping --config ${config} --session size | awk '{ print $1 }'` + done + + # wait for time to start + local state="FAIL" + while [ "${state}" != "OK" ]; do + state=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` + done + + # stop daemon + daemon_exit ${config} + + rm -rf ${base} + rm -f ${config} + rm -f ${config_new} + rm -f ${config_empty} +} + +test_stop() +{ + echo "test daemon stop" + + local config=$(mktemp /tmp/perf.daemon.config.XXX) + local base=$(mktemp -d /tmp/perf.daemon.base.XXX) + + # prepare config + cat < ${config} +[daemon] +base=BASE + +[session-size] +run = -e cpu-clock -m 1 sleep 10 + +[session-time] +run = -e task-clock -m 1 sleep 10 +EOF + + sed -i -e "s|BASE|${base}|" ${config} + + # start daemon + daemon_start ${config} size + + local pid_size=`perf daemon --config ${config} -x: | head -2 | tail -1 | awk 'BEGIN { FS = ":" } ; { print $1 }'` + local pid_time=`perf daemon --config ${config} -x: | head -3 | tail -1 | awk 'BEGIN { FS = ":" } ; { print $1 }'` + + # check that sessions are running + if [ ! -d "/proc/${pid_size}" ]; then + echo "FAILED: session size not up" + fi + + if [ ! -d "/proc/${pid_time}" ]; then + echo "FAILED: session time not up" + fi + + # stop daemon + daemon_exit ${config} + + # check that sessions are gone + if [ -d "/proc/${pid_size}" ]; then + echo "FAILED: session size still up" + fi + + if [ -d "/proc/${pid_time}" ]; then + echo "FAILED: session time still up" + fi + + rm -rf ${base} + rm -f ${config} +} + +test_signal() +{ + echo "test daemon signal" + + local config=$(mktemp /tmp/perf.daemon.config.XXX) + local base=$(mktemp -d /tmp/perf.daemon.base.XXX) + + # prepare config + cat < ${config} +[daemon] +base=BASE + +[session-test] +run = -e cpu-clock --switch-output -m 1 sleep 10 +EOF + + sed -i -e "s|BASE|${base}|" ${config} + + # start daemon + daemon_start ${config} test + + # send 2 signals + perf daemon signal --config ${config} --session test + perf daemon signal --config ${config} + + # stop daemon + daemon_exit ${config} + + # count is 2 perf.data for signals and 1 for perf record finished + count=`ls ${base}/session-test/ | grep perf.data | wc -l` + if [ ${count} -ne 3 ]; then + error=1 + echo "FAILED: perf data no generated" + fi + + rm -rf ${base} + rm -f ${config} +} + +test_ping() +{ + echo "test daemon ping" + + local config=$(mktemp /tmp/perf.daemon.config.XXX) + local base=$(mktemp -d /tmp/perf.daemon.base.XXX) + + # prepare config + cat < ${config} +[daemon] +base=BASE + +[session-size] +run = -e cpu-clock -m 1 sleep 10 + +[session-time] +run = -e task-clock -m 1 sleep 10 +EOF + + sed -i -e "s|BASE|${base}|" ${config} + + # start daemon + daemon_start ${config} size + + size=`perf daemon ping --config ${config} --session size | awk '{ print $1 }'` + type=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` + + if [ ${size} != "OK" -o ${type} != "OK" ]; then + error=1 + echo "FAILED: daemon ping failed" + fi + + # stop daemon + daemon_exit ${config} + + rm -rf ${base} + rm -f ${config} +} + +test_lock() +{ + echo "test daemon lock" + + local config=$(mktemp /tmp/perf.daemon.config.XXX) + local base=$(mktemp -d /tmp/perf.daemon.base.XXX) + + # prepare config + cat < ${config} +[daemon] +base=BASE + +[session-size] +run = -e cpu-clock -m 1 sleep 10 +EOF + + sed -i -e "s|BASE|${base}|" ${config} + + # start daemon + daemon_start ${config} size + + # start second daemon over the same config/base + failed=`perf daemon start --config ${config} 2>&1 | awk '{ print $1 }'` + + # check that we failed properly + if [ ${failed} != "failed:" ]; then + error=1 + echo "FAILED: daemon lock failed" + fi + + # stop daemon + daemon_exit ${config} + + rm -rf ${base} + rm -f ${config} +} + +error=0 + +test_list +test_reconfig +test_stop +test_signal +test_ping +test_lock + +exit ${error} -- cgit v1.2.3