From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/util/bpf-prologue.c | 508 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 508 insertions(+) create mode 100644 tools/perf/util/bpf-prologue.c (limited to 'tools/perf/util/bpf-prologue.c') diff --git a/tools/perf/util/bpf-prologue.c b/tools/perf/util/bpf-prologue.c new file mode 100644 index 000000000..9887ae092 --- /dev/null +++ b/tools/perf/util/bpf-prologue.c @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * bpf-prologue.c + * + * Copyright (C) 2015 He Kuang + * Copyright (C) 2015 Wang Nan + * Copyright (C) 2015 Huawei Inc. + */ + +#include +#include "debug.h" +#include "bpf-loader.h" +#include "bpf-prologue.h" +#include "probe-finder.h" +#include +#include +#include +#include + +#define BPF_REG_SIZE 8 + +#define JMP_TO_ERROR_CODE -1 +#define JMP_TO_SUCCESS_CODE -2 +#define JMP_TO_USER_CODE -3 + +struct bpf_insn_pos { + struct bpf_insn *begin; + struct bpf_insn *end; + struct bpf_insn *pos; +}; + +static inline int +pos_get_cnt(struct bpf_insn_pos *pos) +{ + return pos->pos - pos->begin; +} + +static int +append_insn(struct bpf_insn new_insn, struct bpf_insn_pos *pos) +{ + if (!pos->pos) + return -BPF_LOADER_ERRNO__PROLOGUE2BIG; + + if (pos->pos + 1 >= pos->end) { + pr_err("bpf prologue: prologue too long\n"); + pos->pos = NULL; + return -BPF_LOADER_ERRNO__PROLOGUE2BIG; + } + + *(pos->pos)++ = new_insn; + return 0; +} + +static int +check_pos(struct bpf_insn_pos *pos) +{ + if (!pos->pos || pos->pos >= pos->end) + return -BPF_LOADER_ERRNO__PROLOGUE2BIG; + return 0; +} + +/* + * Convert type string (u8/u16/u32/u64/s8/s16/s32/s64 ..., see + * Documentation/trace/kprobetrace.rst) to size field of BPF_LDX_MEM + * instruction (BPF_{B,H,W,DW}). + */ +static int +argtype_to_ldx_size(const char *type) +{ + int arg_size = type ? atoi(&type[1]) : 64; + + switch (arg_size) { + case 8: + return BPF_B; + case 16: + return BPF_H; + case 32: + return BPF_W; + case 64: + default: + return BPF_DW; + } +} + +static const char * +insn_sz_to_str(int insn_sz) +{ + switch (insn_sz) { + case BPF_B: + return "BPF_B"; + case BPF_H: + return "BPF_H"; + case BPF_W: + return "BPF_W"; + case BPF_DW: + return "BPF_DW"; + default: + return "UNKNOWN"; + } +} + +/* Give it a shorter name */ +#define ins(i, p) append_insn((i), (p)) + +/* + * Give a register name (in 'reg'), generate instruction to + * load register into an eBPF register rd: + * 'ldd target_reg, offset(ctx_reg)', where: + * ctx_reg is pre initialized to pointer of 'struct pt_regs'. + */ +static int +gen_ldx_reg_from_ctx(struct bpf_insn_pos *pos, int ctx_reg, + const char *reg, int target_reg) +{ + int offset = regs_query_register_offset(reg); + + if (offset < 0) { + pr_err("bpf: prologue: failed to get register %s\n", + reg); + return offset; + } + ins(BPF_LDX_MEM(BPF_DW, target_reg, ctx_reg, offset), pos); + + return check_pos(pos); +} + +/* + * Generate a BPF_FUNC_probe_read function call. + * + * src_base_addr_reg is a register holding base address, + * dst_addr_reg is a register holding dest address (on stack), + * result is: + * + * *[dst_addr_reg] = *([src_base_addr_reg] + offset) + * + * Arguments of BPF_FUNC_probe_read: + * ARG1: ptr to stack (dest) + * ARG2: size (8) + * ARG3: unsafe ptr (src) + */ +static int +gen_read_mem(struct bpf_insn_pos *pos, + int src_base_addr_reg, + int dst_addr_reg, + long offset, + int probeid) +{ + /* mov arg3, src_base_addr_reg */ + if (src_base_addr_reg != BPF_REG_ARG3) + ins(BPF_MOV64_REG(BPF_REG_ARG3, src_base_addr_reg), pos); + /* add arg3, #offset */ + if (offset) + ins(BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG3, offset), pos); + + /* mov arg2, #reg_size */ + ins(BPF_ALU64_IMM(BPF_MOV, BPF_REG_ARG2, BPF_REG_SIZE), pos); + + /* mov arg1, dst_addr_reg */ + if (dst_addr_reg != BPF_REG_ARG1) + ins(BPF_MOV64_REG(BPF_REG_ARG1, dst_addr_reg), pos); + + /* Call probe_read */ + ins(BPF_EMIT_CALL(probeid), pos); + /* + * Error processing: if read fail, goto error code, + * will be relocated. Target should be the start of + * error processing code. + */ + ins(BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, JMP_TO_ERROR_CODE), + pos); + + return check_pos(pos); +} + +/* + * Each arg should be bare register. Fetch and save them into argument + * registers (r3 - r5). + * + * BPF_REG_1 should have been initialized with pointer to + * 'struct pt_regs'. + */ +static int +gen_prologue_fastpath(struct bpf_insn_pos *pos, + struct probe_trace_arg *args, int nargs) +{ + int i, err = 0; + + for (i = 0; i < nargs; i++) { + err = gen_ldx_reg_from_ctx(pos, BPF_REG_1, args[i].value, + BPF_PROLOGUE_START_ARG_REG + i); + if (err) + goto errout; + } + + return check_pos(pos); +errout: + return err; +} + +/* + * Slow path: + * At least one argument has the form of 'offset($rx)'. + * + * Following code first stores them into stack, then loads all of then + * to r2 - r5. + * Before final loading, the final result should be: + * + * low address + * BPF_REG_FP - 24 ARG3 + * BPF_REG_FP - 16 ARG2 + * BPF_REG_FP - 8 ARG1 + * BPF_REG_FP + * high address + * + * For each argument (described as: offn(...off2(off1(reg)))), + * generates following code: + * + * r7 <- fp + * r7 <- r7 - stack_offset // Ideal code should initialize r7 using + * // fp before generating args. However, + * // eBPF won't regard r7 as stack pointer + * // if it is generated by minus 8 from + * // another stack pointer except fp. + * // This is why we have to set r7 + * // to fp for each variable. + * r3 <- value of 'reg'-> generated using gen_ldx_reg_from_ctx() + * (r7) <- r3 // skip following instructions for bare reg + * r3 <- r3 + off1 . // skip if off1 == 0 + * r2 <- 8 \ + * r1 <- r7 |-> generated by gen_read_mem() + * call probe_read / + * jnei r0, 0, err ./ + * r3 <- (r7) + * r3 <- r3 + off2 . // skip if off2 == 0 + * r2 <- 8 \ // r2 may be broken by probe_read, so set again + * r1 <- r7 |-> generated by gen_read_mem() + * call probe_read / + * jnei r0, 0, err ./ + * ... + */ +static int +gen_prologue_slowpath(struct bpf_insn_pos *pos, + struct probe_trace_arg *args, int nargs) +{ + int err, i, probeid; + + for (i = 0; i < nargs; i++) { + struct probe_trace_arg *arg = &args[i]; + const char *reg = arg->value; + struct probe_trace_arg_ref *ref = NULL; + int stack_offset = (i + 1) * -8; + + pr_debug("prologue: fetch arg %d, base reg is %s\n", + i, reg); + + /* value of base register is stored into ARG3 */ + err = gen_ldx_reg_from_ctx(pos, BPF_REG_CTX, reg, + BPF_REG_ARG3); + if (err) { + pr_err("prologue: failed to get offset of register %s\n", + reg); + goto errout; + } + + /* Make r7 the stack pointer. */ + ins(BPF_MOV64_REG(BPF_REG_7, BPF_REG_FP), pos); + /* r7 += -8 */ + ins(BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, stack_offset), pos); + /* + * Store r3 (base register) onto stack + * Ensure fp[offset] is set. + * fp is the only valid base register when storing + * into stack. We are not allowed to use r7 as base + * register here. + */ + ins(BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_ARG3, + stack_offset), pos); + + ref = arg->ref; + probeid = BPF_FUNC_probe_read_kernel; + while (ref) { + pr_debug("prologue: arg %d: offset %ld\n", + i, ref->offset); + + if (ref->user_access) + probeid = BPF_FUNC_probe_read_user; + + err = gen_read_mem(pos, BPF_REG_3, BPF_REG_7, + ref->offset, probeid); + if (err) { + pr_err("prologue: failed to generate probe_read function call\n"); + goto errout; + } + + ref = ref->next; + /* + * Load previous result into ARG3. Use + * BPF_REG_FP instead of r7 because verifier + * allows FP based addressing only. + */ + if (ref) + ins(BPF_LDX_MEM(BPF_DW, BPF_REG_ARG3, + BPF_REG_FP, stack_offset), pos); + } + } + + /* Final pass: read to registers */ + for (i = 0; i < nargs; i++) { + int insn_sz = (args[i].ref) ? argtype_to_ldx_size(args[i].type) : BPF_DW; + + pr_debug("prologue: load arg %d, insn_sz is %s\n", + i, insn_sz_to_str(insn_sz)); + ins(BPF_LDX_MEM(insn_sz, BPF_PROLOGUE_START_ARG_REG + i, + BPF_REG_FP, -BPF_REG_SIZE * (i + 1)), pos); + } + + ins(BPF_JMP_IMM(BPF_JA, BPF_REG_0, 0, JMP_TO_SUCCESS_CODE), pos); + + return check_pos(pos); +errout: + return err; +} + +static int +prologue_relocate(struct bpf_insn_pos *pos, struct bpf_insn *error_code, + struct bpf_insn *success_code, struct bpf_insn *user_code) +{ + struct bpf_insn *insn; + + if (check_pos(pos)) + return -BPF_LOADER_ERRNO__PROLOGUE2BIG; + + for (insn = pos->begin; insn < pos->pos; insn++) { + struct bpf_insn *target; + u8 class = BPF_CLASS(insn->code); + u8 opcode; + + if (class != BPF_JMP) + continue; + opcode = BPF_OP(insn->code); + if (opcode == BPF_CALL) + continue; + + switch (insn->off) { + case JMP_TO_ERROR_CODE: + target = error_code; + break; + case JMP_TO_SUCCESS_CODE: + target = success_code; + break; + case JMP_TO_USER_CODE: + target = user_code; + break; + default: + pr_err("bpf prologue: internal error: relocation failed\n"); + return -BPF_LOADER_ERRNO__PROLOGUE; + } + + insn->off = target - (insn + 1); + } + return 0; +} + +int bpf__gen_prologue(struct probe_trace_arg *args, int nargs, + struct bpf_insn *new_prog, size_t *new_cnt, + size_t cnt_space) +{ + struct bpf_insn *success_code = NULL; + struct bpf_insn *error_code = NULL; + struct bpf_insn *user_code = NULL; + struct bpf_insn_pos pos; + bool fastpath = true; + int err = 0, i; + + if (!new_prog || !new_cnt) + return -EINVAL; + + if (cnt_space > BPF_MAXINSNS) + cnt_space = BPF_MAXINSNS; + + pos.begin = new_prog; + pos.end = new_prog + cnt_space; + pos.pos = new_prog; + + if (!nargs) { + ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 0), + &pos); + + if (check_pos(&pos)) + goto errout; + + *new_cnt = pos_get_cnt(&pos); + return 0; + } + + if (nargs > BPF_PROLOGUE_MAX_ARGS) { + pr_warning("bpf: prologue: %d arguments are dropped\n", + nargs - BPF_PROLOGUE_MAX_ARGS); + nargs = BPF_PROLOGUE_MAX_ARGS; + } + + /* First pass: validation */ + for (i = 0; i < nargs; i++) { + struct probe_trace_arg_ref *ref = args[i].ref; + + if (args[i].value[0] == '@') { + /* TODO: fetch global variable */ + pr_err("bpf: prologue: global %s%+ld not support\n", + args[i].value, ref ? ref->offset : 0); + return -ENOTSUP; + } + + while (ref) { + /* fastpath is true if all args has ref == NULL */ + fastpath = false; + + /* + * Instruction encodes immediate value using + * s32, ref->offset is long. On systems which + * can't fill long in s32, refuse to process if + * ref->offset too large (or small). + */ +#ifdef __LP64__ +#define OFFSET_MAX ((1LL << 31) - 1) +#define OFFSET_MIN ((1LL << 31) * -1) + if (ref->offset > OFFSET_MAX || + ref->offset < OFFSET_MIN) { + pr_err("bpf: prologue: offset out of bound: %ld\n", + ref->offset); + return -BPF_LOADER_ERRNO__PROLOGUEOOB; + } +#endif + ref = ref->next; + } + } + pr_debug("prologue: pass validation\n"); + + if (fastpath) { + /* If all variables are registers... */ + pr_debug("prologue: fast path\n"); + err = gen_prologue_fastpath(&pos, args, nargs); + if (err) + goto errout; + } else { + pr_debug("prologue: slow path\n"); + + /* Initialization: move ctx to a callee saved register. */ + ins(BPF_MOV64_REG(BPF_REG_CTX, BPF_REG_ARG1), &pos); + + err = gen_prologue_slowpath(&pos, args, nargs); + if (err) + goto errout; + /* + * start of ERROR_CODE (only slow pass needs error code) + * mov r2 <- 1 // r2 is error number + * mov r3 <- 0 // r3, r4... should be touched or + * // verifier would complain + * mov r4 <- 0 + * ... + * goto usercode + */ + error_code = pos.pos; + ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 1), + &pos); + + for (i = 0; i < nargs; i++) + ins(BPF_ALU64_IMM(BPF_MOV, + BPF_PROLOGUE_START_ARG_REG + i, + 0), + &pos); + ins(BPF_JMP_IMM(BPF_JA, BPF_REG_0, 0, JMP_TO_USER_CODE), + &pos); + } + + /* + * start of SUCCESS_CODE: + * mov r2 <- 0 + * goto usercode // skip + */ + success_code = pos.pos; + ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 0), &pos); + + /* + * start of USER_CODE: + * Restore ctx to r1 + */ + user_code = pos.pos; + if (!fastpath) { + /* + * Only slow path needs restoring of ctx. In fast path, + * register are loaded directly from r1. + */ + ins(BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_CTX), &pos); + err = prologue_relocate(&pos, error_code, success_code, + user_code); + if (err) + goto errout; + } + + err = check_pos(&pos); + if (err) + goto errout; + + *new_cnt = pos_get_cnt(&pos); + return 0; +errout: + return err; +} -- cgit v1.2.3