From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/util/debug.c | 298 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 298 insertions(+) create mode 100644 tools/perf/util/debug.c (limited to 'tools/perf/util/debug.c') diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c new file mode 100644 index 000000000..190e818a0 --- /dev/null +++ b/tools/perf/util/debug.c @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* For general debugging purposes */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef HAVE_BACKTRACE_SUPPORT +#include +#endif +#include "color.h" +#include "event.h" +#include "debug.h" +#include "print_binary.h" +#include "target.h" +#include "ui/helpline.h" +#include "ui/ui.h" +#include "util/parse-sublevel-options.h" + +#include + +int verbose; +int debug_peo_args; +bool dump_trace = false, quiet = false; +int debug_ordered_events; +static int redirect_to_stderr; +int debug_data_convert; +static FILE *debug_file; +bool debug_display_time; + +void debug_set_file(FILE *file) +{ + debug_file = file; +} + +void debug_set_display_time(bool set) +{ + debug_display_time = set; +} + +static int fprintf_time(FILE *file) +{ + struct timeval tod; + struct tm ltime; + char date[64]; + + if (!debug_display_time) + return 0; + + if (gettimeofday(&tod, NULL) != 0) + return 0; + + if (localtime_r(&tod.tv_sec, <ime) == NULL) + return 0; + + strftime(date, sizeof(date), "%F %H:%M:%S", <ime); + return fprintf(file, "[%s.%06lu] ", date, (long)tod.tv_usec); +} + +int veprintf(int level, int var, const char *fmt, va_list args) +{ + int ret = 0; + + if (var >= level) { + if (use_browser >= 1 && !redirect_to_stderr) { + ui_helpline__vshow(fmt, args); + } else { + ret = fprintf_time(debug_file); + ret += vfprintf(debug_file, fmt, args); + } + } + + return ret; +} + +int eprintf(int level, int var, const char *fmt, ...) +{ + va_list args; + int ret; + + va_start(args, fmt); + ret = veprintf(level, var, fmt, args); + va_end(args); + + return ret; +} + +static int veprintf_time(u64 t, const char *fmt, va_list args) +{ + int ret = 0; + u64 secs, usecs, nsecs = t; + + secs = nsecs / NSEC_PER_SEC; + nsecs -= secs * NSEC_PER_SEC; + usecs = nsecs / NSEC_PER_USEC; + + ret = fprintf(stderr, "[%13" PRIu64 ".%06" PRIu64 "] ", + secs, usecs); + ret += vfprintf(stderr, fmt, args); + return ret; +} + +int eprintf_time(int level, int var, u64 t, const char *fmt, ...) +{ + int ret = 0; + va_list args; + + if (var >= level) { + va_start(args, fmt); + ret = veprintf_time(t, fmt, args); + va_end(args); + } + + return ret; +} + +/* + * Overloading libtraceevent standard info print + * function, display with -v in perf. + */ +void pr_stat(const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + veprintf(1, verbose, fmt, args); + va_end(args); + eprintf(1, verbose, "\n"); +} + +int dump_printf(const char *fmt, ...) +{ + va_list args; + int ret = 0; + + if (dump_trace) { + va_start(args, fmt); + ret = vprintf(fmt, args); + va_end(args); + } + + return ret; +} + +static int trace_event_printer(enum binary_printer_ops op, + unsigned int val, void *extra, FILE *fp) +{ + const char *color = PERF_COLOR_BLUE; + union perf_event *event = (union perf_event *)extra; + unsigned char ch = (unsigned char)val; + int printed = 0; + + switch (op) { + case BINARY_PRINT_DATA_BEGIN: + printed += fprintf(fp, "."); + printed += color_fprintf(fp, color, "\n. ... raw event: size %d bytes\n", + event->header.size); + break; + case BINARY_PRINT_LINE_BEGIN: + printed += fprintf(fp, "."); + break; + case BINARY_PRINT_ADDR: + printed += color_fprintf(fp, color, " %04x: ", val); + break; + case BINARY_PRINT_NUM_DATA: + printed += color_fprintf(fp, color, " %02x", val); + break; + case BINARY_PRINT_NUM_PAD: + printed += color_fprintf(fp, color, " "); + break; + case BINARY_PRINT_SEP: + printed += color_fprintf(fp, color, " "); + break; + case BINARY_PRINT_CHAR_DATA: + printed += color_fprintf(fp, color, "%c", + isprint(ch) && isascii(ch) ? ch : '.'); + break; + case BINARY_PRINT_CHAR_PAD: + printed += color_fprintf(fp, color, " "); + break; + case BINARY_PRINT_LINE_END: + printed += color_fprintf(fp, color, "\n"); + break; + case BINARY_PRINT_DATA_END: + printed += fprintf(fp, "\n"); + break; + default: + break; + } + + return printed; +} + +void trace_event(union perf_event *event) +{ + unsigned char *raw_event = (void *)event; + + if (!dump_trace) + return; + + print_binary(raw_event, event->header.size, 16, + trace_event_printer, event); +} + +static struct sublevel_option debug_opts[] = { + { .name = "verbose", .value_ptr = &verbose }, + { .name = "ordered-events", .value_ptr = &debug_ordered_events}, + { .name = "stderr", .value_ptr = &redirect_to_stderr}, + { .name = "data-convert", .value_ptr = &debug_data_convert }, + { .name = "perf-event-open", .value_ptr = &debug_peo_args }, + { .name = NULL, } +}; + +int perf_debug_option(const char *str) +{ + int ret; + + ret = perf_parse_sublevel_options(str, debug_opts); + if (ret) + return ret; + + /* Allow only verbose value in range (0, 10), otherwise set 0. */ + verbose = (verbose < 0) || (verbose > 10) ? 0 : verbose; + + return 0; +} + +int perf_quiet_option(void) +{ + struct sublevel_option *opt = &debug_opts[0]; + + /* disable all debug messages */ + while (opt->name) { + *opt->value_ptr = -1; + opt++; + } + + /* For debug variables that are used as bool types, set to 0. */ + redirect_to_stderr = 0; + debug_peo_args = 0; + + return 0; +} + +#define DEBUG_WRAPPER(__n, __l) \ +static int pr_ ## __n ## _wrapper(const char *fmt, ...) \ +{ \ + va_list args; \ + int ret; \ + \ + va_start(args, fmt); \ + ret = veprintf(__l, verbose, fmt, args); \ + va_end(args); \ + return ret; \ +} + +DEBUG_WRAPPER(warning, 0); +DEBUG_WRAPPER(debug, 1); + +void perf_debug_setup(void) +{ + debug_set_file(stderr); + libapi_set_print(pr_warning_wrapper, pr_warning_wrapper, pr_debug_wrapper); +} + +/* Obtain a backtrace and print it to stdout. */ +#ifdef HAVE_BACKTRACE_SUPPORT +void dump_stack(void) +{ + void *array[16]; + size_t size = backtrace(array, ARRAY_SIZE(array)); + char **strings = backtrace_symbols(array, size); + size_t i; + + printf("Obtained %zd stack frames.\n", size); + + for (i = 0; i < size; i++) + printf("%s\n", strings[i]); + + free(strings); +} +#else +void dump_stack(void) {} +#endif + +void sighandler_dump_stack(int sig) +{ + psignal(sig, "perf"); + dump_stack(); + signal(sig, SIG_DFL); + raise(sig); +} -- cgit v1.2.3