From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/util/string.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 tools/perf/util/string.c (limited to 'tools/perf/util/string.c') diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c new file mode 100644 index 000000000..4f12a96f3 --- /dev/null +++ b/tools/perf/util/string.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "string2.h" +#include +#include +#include + +#include + +const char *graph_dotted_line = + "---------------------------------------------------------------------" + "---------------------------------------------------------------------" + "---------------------------------------------------------------------"; +const char *dots = + "....................................................................." + "....................................................................." + "....................................................................."; + +/* + * perf_atoll() + * Parse (\d+)(b|B|kb|KB|mb|MB|gb|GB|tb|TB) (e.g. "256MB") + * and return its numeric value + */ +s64 perf_atoll(const char *str) +{ + s64 length; + char *p; + char c; + + if (!isdigit(str[0])) + goto out_err; + + length = strtoll(str, &p, 10); + switch (c = *p++) { + case 'b': case 'B': + if (*p) + goto out_err; + + __fallthrough; + case '\0': + return length; + default: + goto out_err; + /* two-letter suffices */ + case 'k': case 'K': + length <<= 10; + break; + case 'm': case 'M': + length <<= 20; + break; + case 'g': case 'G': + length <<= 30; + break; + case 't': case 'T': + length <<= 40; + break; + } + /* we want the cases to match */ + if (islower(c)) { + if (strcmp(p, "b") != 0) + goto out_err; + } else { + if (strcmp(p, "B") != 0) + goto out_err; + } + return length; + +out_err: + return -1; +} + +/* Character class matching */ +static bool __match_charclass(const char *pat, char c, const char **npat) +{ + bool complement = false, ret = true; + + if (*pat == '!') { + complement = true; + pat++; + } + if (*pat++ == c) /* First character is special */ + goto end; + + while (*pat && *pat != ']') { /* Matching */ + if (*pat == '-' && *(pat + 1) != ']') { /* Range */ + if (*(pat - 1) <= c && c <= *(pat + 1)) + goto end; + if (*(pat - 1) > *(pat + 1)) + goto error; + pat += 2; + } else if (*pat++ == c) + goto end; + } + if (!*pat) + goto error; + ret = false; + +end: + while (*pat && *pat != ']') /* Searching closing */ + pat++; + if (!*pat) + goto error; + *npat = pat + 1; + return complement ? !ret : ret; + +error: + return false; +} + +/* Glob/lazy pattern matching */ +static bool __match_glob(const char *str, const char *pat, bool ignore_space, + bool case_ins) +{ + while (*str && *pat && *pat != '*') { + if (ignore_space) { + /* Ignore spaces for lazy matching */ + if (isspace(*str)) { + str++; + continue; + } + if (isspace(*pat)) { + pat++; + continue; + } + } + if (*pat == '?') { /* Matches any single character */ + str++; + pat++; + continue; + } else if (*pat == '[') /* Character classes/Ranges */ + if (__match_charclass(pat + 1, *str, &pat)) { + str++; + continue; + } else + return false; + else if (*pat == '\\') /* Escaped char match as normal char */ + pat++; + if (case_ins) { + if (tolower(*str) != tolower(*pat)) + return false; + } else if (*str != *pat) + return false; + str++; + pat++; + } + /* Check wild card */ + if (*pat == '*') { + while (*pat == '*') + pat++; + if (!*pat) /* Tail wild card matches all */ + return true; + while (*str) + if (__match_glob(str++, pat, ignore_space, case_ins)) + return true; + } + return !*str && !*pat; +} + +/** + * strglobmatch - glob expression pattern matching + * @str: the target string to match + * @pat: the pattern string to match + * + * This returns true if the @str matches @pat. @pat can includes wildcards + * ('*','?') and character classes ([CHARS], complementation and ranges are + * also supported). Also, this supports escape character ('\') to use special + * characters as normal character. + * + * Note: if @pat syntax is broken, this always returns false. + */ +bool strglobmatch(const char *str, const char *pat) +{ + return __match_glob(str, pat, false, false); +} + +bool strglobmatch_nocase(const char *str, const char *pat) +{ + return __match_glob(str, pat, false, true); +} + +/** + * strlazymatch - matching pattern strings lazily with glob pattern + * @str: the target string to match + * @pat: the pattern string to match + * + * This is similar to strglobmatch, except this ignores spaces in + * the target string. + */ +bool strlazymatch(const char *str, const char *pat) +{ + return __match_glob(str, pat, true, false); +} + +/** + * strtailcmp - Compare the tail of two strings + * @s1: 1st string to be compared + * @s2: 2nd string to be compared + * + * Return 0 if whole of either string is same as another's tail part. + */ +int strtailcmp(const char *s1, const char *s2) +{ + int i1 = strlen(s1); + int i2 = strlen(s2); + while (--i1 >= 0 && --i2 >= 0) { + if (s1[i1] != s2[i2]) + return s1[i1] - s2[i2]; + } + return 0; +} + +char *asprintf_expr_inout_ints(const char *var, bool in, size_t nints, int *ints) +{ + /* + * FIXME: replace this with an expression using log10() when we + * find a suitable implementation, maybe the one in the dvb drivers... + * + * "%s == %d || " = log10(MAXINT) * 2 + 8 chars for the operators + */ + size_t size = nints * 28 + 1; /* \0 */ + size_t i, printed = 0; + char *expr = malloc(size); + + if (expr) { + const char *or_and = "||", *eq_neq = "=="; + char *e = expr; + + if (!in) { + or_and = "&&"; + eq_neq = "!="; + } + + for (i = 0; i < nints; ++i) { + if (printed == size) + goto out_err_overflow; + + if (i > 0) + printed += scnprintf(e + printed, size - printed, " %s ", or_and); + printed += scnprintf(e + printed, size - printed, + "%s %s %d", var, eq_neq, ints[i]); + } + } + + return expr; + +out_err_overflow: + free(expr); + return NULL; +} + +/* Like strpbrk(), but not break if it is right after a backslash (escaped) */ +char *strpbrk_esc(char *str, const char *stopset) +{ + char *ptr; + + do { + ptr = strpbrk(str, stopset); + if (ptr == str || + (ptr == str + 1 && *(ptr - 1) != '\\')) + break; + str = ptr + 1; + } while (ptr && *(ptr - 1) == '\\' && *(ptr - 2) != '\\'); + + return ptr; +} + +/* Like strdup, but do not copy a single backslash */ +char *strdup_esc(const char *str) +{ + char *s, *d, *p, *ret = strdup(str); + + if (!ret) + return NULL; + + d = strchr(ret, '\\'); + if (!d) + return ret; + + s = d + 1; + do { + if (*s == '\0') { + *d = '\0'; + break; + } + p = strchr(s + 1, '\\'); + if (p) { + memmove(d, s, p - s); + d += p - s; + s = p + 1; + } else + memmove(d, s, strlen(s) + 1); + } while (p); + + return ret; +} + +unsigned int hex(char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + return c - 'A' + 10; +} -- cgit v1.2.3