From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/power/cpupower/utils/helpers/amd.c | 226 +++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 tools/power/cpupower/utils/helpers/amd.c (limited to 'tools/power/cpupower/utils/helpers/amd.c') diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c new file mode 100644 index 000000000..c519cc89c --- /dev/null +++ b/tools/power/cpupower/utils/helpers/amd.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0 +#if defined(__i386__) || defined(__x86_64__) +#include +#include +#include +#include + +#include + +#include "helpers/helpers.h" +#include "cpufreq.h" +#include "acpi_cppc.h" + +/* ACPI P-States Helper Functions for AMD Processors ***************/ +#define MSR_AMD_PSTATE_STATUS 0xc0010063 +#define MSR_AMD_PSTATE 0xc0010064 +#define MSR_AMD_PSTATE_LIMIT 0xc0010061 + +union core_pstate { + /* pre fam 17h: */ + struct { + unsigned fid:6; + unsigned did:3; + unsigned vid:7; + unsigned res1:6; + unsigned nbdid:1; + unsigned res2:2; + unsigned nbvid:7; + unsigned iddval:8; + unsigned idddiv:2; + unsigned res3:21; + unsigned en:1; + } pstate; + /* since fam 17h: */ + struct { + unsigned fid:8; + unsigned did:6; + unsigned vid:8; + unsigned iddval:8; + unsigned idddiv:2; + unsigned res1:31; + unsigned en:1; + } pstatedef; + unsigned long long val; +}; + +static int get_did(union core_pstate pstate) +{ + int t; + + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_PSTATEDEF) + t = pstate.pstatedef.did; + else if (cpupower_cpu_info.family == 0x12) + t = pstate.val & 0xf; + else + t = pstate.pstate.did; + + return t; +} + +static int get_cof(union core_pstate pstate) +{ + int t; + int fid, did, cof; + + did = get_did(pstate); + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_PSTATEDEF) { + fid = pstate.pstatedef.fid; + cof = 200 * fid / did; + } else { + t = 0x10; + fid = pstate.pstate.fid; + if (cpupower_cpu_info.family == 0x11) + t = 0x8; + cof = (100 * (fid + t)) >> did; + } + return cof; +} + +/* Needs: + * cpu -> the cpu that gets evaluated + * boost_states -> how much boost states the machines support + * + * Fills up: + * pstates -> a pointer to an array of size MAX_HW_PSTATES + * must be initialized with zeros. + * All available HW pstates (including boost states) + * no -> amount of pstates above array got filled up with + * + * returns zero on success, -1 on failure + */ +int decode_pstates(unsigned int cpu, int boost_states, + unsigned long *pstates, int *no) +{ + int i, psmax; + union core_pstate pstate; + unsigned long long val; + + /* Only read out frequencies from HW if HW Pstate is supported, + * otherwise frequencies are exported via ACPI tables. + */ + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_HW_PSTATE)) + return -1; + + if (read_msr(cpu, MSR_AMD_PSTATE_LIMIT, &val)) + return -1; + + psmax = (val >> 4) & 0x7; + psmax += boost_states; + for (i = 0; i <= psmax; i++) { + if (i >= MAX_HW_PSTATES) { + fprintf(stderr, "HW pstates [%d] exceeding max [%d]\n", + psmax, MAX_HW_PSTATES); + return -1; + } + if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val)) + return -1; + + /* The enabled bit (bit 63) is common for all families */ + if (!pstate.pstatedef.en) + continue; + + pstates[i] = get_cof(pstate); + } + *no = i; + return 0; +} + +int amd_pci_get_num_boost_states(int *active, int *states) +{ + struct pci_access *pci_acc; + struct pci_dev *device; + uint8_t val = 0; + + *active = *states = 0; + + device = pci_slot_func_init(&pci_acc, 0x18, 4); + + if (device == NULL) + return -ENODEV; + + val = pci_read_byte(device, 0x15c); + if (val & 3) + *active = 1; + else + *active = 0; + *states = (val >> 2) & 7; + + pci_cleanup(pci_acc); + return 0; +} + +/* ACPI P-States Helper Functions for AMD Processors ***************/ + +/* AMD P-State Helper Functions ************************************/ +enum amd_pstate_value { + AMD_PSTATE_HIGHEST_PERF, + AMD_PSTATE_MAX_FREQ, + AMD_PSTATE_LOWEST_NONLINEAR_FREQ, + MAX_AMD_PSTATE_VALUE_READ_FILES, +}; + +static const char *amd_pstate_value_files[MAX_AMD_PSTATE_VALUE_READ_FILES] = { + [AMD_PSTATE_HIGHEST_PERF] = "amd_pstate_highest_perf", + [AMD_PSTATE_MAX_FREQ] = "amd_pstate_max_freq", + [AMD_PSTATE_LOWEST_NONLINEAR_FREQ] = "amd_pstate_lowest_nonlinear_freq", +}; + +static unsigned long amd_pstate_get_data(unsigned int cpu, + enum amd_pstate_value value) +{ + return cpufreq_get_sysfs_value_from_table(cpu, + amd_pstate_value_files, + value, + MAX_AMD_PSTATE_VALUE_READ_FILES); +} + +void amd_pstate_boost_init(unsigned int cpu, int *support, int *active) +{ + unsigned long highest_perf, nominal_perf, cpuinfo_min, + cpuinfo_max, amd_pstate_max; + + highest_perf = amd_pstate_get_data(cpu, AMD_PSTATE_HIGHEST_PERF); + nominal_perf = acpi_cppc_get_data(cpu, NOMINAL_PERF); + + *support = highest_perf > nominal_perf ? 1 : 0; + if (!(*support)) + return; + + cpufreq_get_hardware_limits(cpu, &cpuinfo_min, &cpuinfo_max); + amd_pstate_max = amd_pstate_get_data(cpu, AMD_PSTATE_MAX_FREQ); + + *active = cpuinfo_max == amd_pstate_max ? 1 : 0; +} + +void amd_pstate_show_perf_and_freq(unsigned int cpu, int no_rounding) +{ + printf(_(" AMD PSTATE Highest Performance: %lu. Maximum Frequency: "), + amd_pstate_get_data(cpu, AMD_PSTATE_HIGHEST_PERF)); + /* + * If boost isn't active, the cpuinfo_max doesn't indicate real max + * frequency. So we read it back from amd-pstate sysfs entry. + */ + print_speed(amd_pstate_get_data(cpu, AMD_PSTATE_MAX_FREQ), no_rounding); + printf(".\n"); + + printf(_(" AMD PSTATE Nominal Performance: %lu. Nominal Frequency: "), + acpi_cppc_get_data(cpu, NOMINAL_PERF)); + print_speed(acpi_cppc_get_data(cpu, NOMINAL_FREQ) * 1000, + no_rounding); + printf(".\n"); + + printf(_(" AMD PSTATE Lowest Non-linear Performance: %lu. Lowest Non-linear Frequency: "), + acpi_cppc_get_data(cpu, LOWEST_NONLINEAR_PERF)); + print_speed(amd_pstate_get_data(cpu, AMD_PSTATE_LOWEST_NONLINEAR_FREQ), + no_rounding); + printf(".\n"); + + printf(_(" AMD PSTATE Lowest Performance: %lu. Lowest Frequency: "), + acpi_cppc_get_data(cpu, LOWEST_PERF)); + print_speed(acpi_cppc_get_data(cpu, LOWEST_FREQ) * 1000, no_rounding); + printf(".\n"); +} + +/* AMD P-State Helper Functions ************************************/ +#endif /* defined(__i386__) || defined(__x86_64__) */ -- cgit v1.2.3