From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/power/cpupower/utils/helpers/cpuid.c | 213 +++++++++++++++++++++++++++++ 1 file changed, 213 insertions(+) create mode 100644 tools/power/cpupower/utils/helpers/cpuid.c (limited to 'tools/power/cpupower/utils/helpers/cpuid.c') diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c new file mode 100644 index 000000000..eae91f11d --- /dev/null +++ b/tools/power/cpupower/utils/helpers/cpuid.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include + +#include "helpers/helpers.h" + +static const char *cpu_vendor_table[X86_VENDOR_MAX] = { + "Unknown", "GenuineIntel", "AuthenticAMD", "HygonGenuine", +}; + +#if defined(__i386__) || defined(__x86_64__) + +/* from gcc */ +#include + +/* + * CPUID functions returning a single datum + * + * Define unsigned int cpuid_e[abcd]x(unsigned int op) + */ +#define cpuid_func(reg) \ + unsigned int cpuid_##reg(unsigned int op) \ + { \ + unsigned int eax, ebx, ecx, edx; \ + __cpuid(op, eax, ebx, ecx, edx); \ + return reg; \ + } +cpuid_func(eax); +cpuid_func(ebx); +cpuid_func(ecx); +cpuid_func(edx); + +#endif /* defined(__i386__) || defined(__x86_64__) */ + +/* get_cpu_info + * + * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo + * + * Returns 0 on success or a negativ error code + * + * TBD: Should there be a cpuid alternative for this if /proc is not mounted? + */ +int get_cpu_info(struct cpupower_cpu_info *cpu_info) +{ + FILE *fp; + char value[64]; + unsigned int proc, x; + unsigned int unknown = 0xffffff; + unsigned int cpuid_level, ext_cpuid_level; + + int ret = -EINVAL; + + cpu_info->vendor = X86_VENDOR_UNKNOWN; + cpu_info->family = unknown; + cpu_info->model = unknown; + cpu_info->stepping = unknown; + cpu_info->caps = 0; + + fp = fopen("/proc/cpuinfo", "r"); + if (!fp) + return -EIO; + + while (!feof(fp)) { + if (!fgets(value, 64, fp)) + continue; + value[63 - 1] = '\0'; + + if (!strncmp(value, "processor\t: ", 12)) + sscanf(value, "processor\t: %u", &proc); + + if (proc != (unsigned int)base_cpu) + continue; + + /* Get CPU vendor */ + if (!strncmp(value, "vendor_id", 9)) { + for (x = 1; x < X86_VENDOR_MAX; x++) { + if (strstr(value, cpu_vendor_table[x])) + cpu_info->vendor = x; + } + /* Get CPU family, etc. */ + } else if (!strncmp(value, "cpu family\t: ", 13)) { + sscanf(value, "cpu family\t: %u", + &cpu_info->family); + } else if (!strncmp(value, "model\t\t: ", 9)) { + sscanf(value, "model\t\t: %u", + &cpu_info->model); + } else if (!strncmp(value, "stepping\t: ", 10)) { + sscanf(value, "stepping\t: %u", + &cpu_info->stepping); + + /* Exit -> all values must have been set */ + if (cpu_info->vendor == X86_VENDOR_UNKNOWN || + cpu_info->family == unknown || + cpu_info->model == unknown || + cpu_info->stepping == unknown) { + ret = -EINVAL; + goto out; + } + + ret = 0; + goto out; + } + } + ret = -ENODEV; +out: + fclose(fp); + /* Get some useful CPU capabilities from cpuid */ + if (cpu_info->vendor != X86_VENDOR_AMD && + cpu_info->vendor != X86_VENDOR_HYGON && + cpu_info->vendor != X86_VENDOR_INTEL) + return ret; + + cpuid_level = cpuid_eax(0); + ext_cpuid_level = cpuid_eax(0x80000000); + + /* Invariant TSC */ + if (ext_cpuid_level >= 0x80000007 && + (cpuid_edx(0x80000007) & (1 << 8))) + cpu_info->caps |= CPUPOWER_CAP_INV_TSC; + + /* Aperf/Mperf registers support */ + if (cpuid_level >= 6 && (cpuid_ecx(6) & 0x1)) + cpu_info->caps |= CPUPOWER_CAP_APERF; + + /* AMD or Hygon Boost state enable/disable register */ + if (cpu_info->vendor == X86_VENDOR_AMD || + cpu_info->vendor == X86_VENDOR_HYGON) { + if (ext_cpuid_level >= 0x80000007) { + if (cpuid_edx(0x80000007) & (1 << 9)) { + cpu_info->caps |= CPUPOWER_CAP_AMD_CPB; + + if (cpu_info->family >= 0x17) + cpu_info->caps |= CPUPOWER_CAP_AMD_CPB_MSR; + } + + if ((cpuid_edx(0x80000007) & (1 << 7)) && + cpu_info->family != 0x14) { + /* HW pstate was not implemented in family 0x14 */ + cpu_info->caps |= CPUPOWER_CAP_AMD_HW_PSTATE; + + if (cpu_info->family >= 0x17) + cpu_info->caps |= CPUPOWER_CAP_AMD_PSTATEDEF; + } + } + + if (ext_cpuid_level >= 0x80000008 && + cpuid_ebx(0x80000008) & (1 << 4)) + cpu_info->caps |= CPUPOWER_CAP_AMD_RDPRU; + + if (cpupower_amd_pstate_enabled()) { + cpu_info->caps |= CPUPOWER_CAP_AMD_PSTATE; + + /* + * If AMD P-State is enabled, the firmware will treat + * AMD P-State function as high priority. + */ + cpu_info->caps &= ~CPUPOWER_CAP_AMD_CPB; + cpu_info->caps &= ~CPUPOWER_CAP_AMD_CPB_MSR; + cpu_info->caps &= ~CPUPOWER_CAP_AMD_HW_PSTATE; + cpu_info->caps &= ~CPUPOWER_CAP_AMD_PSTATEDEF; + } + } + + if (cpu_info->vendor == X86_VENDOR_INTEL) { + if (cpuid_level >= 6 && + (cpuid_eax(6) & (1 << 1))) + cpu_info->caps |= CPUPOWER_CAP_INTEL_IDA; + } + + if (cpu_info->vendor == X86_VENDOR_INTEL) { + /* Intel's perf-bias MSR support */ + if (cpuid_level >= 6 && (cpuid_ecx(6) & (1 << 3))) + cpu_info->caps |= CPUPOWER_CAP_PERF_BIAS; + + /* Intel's Turbo Ratio Limit support */ + if (cpu_info->family == 6) { + switch (cpu_info->model) { + case 0x1A: /* Core i7, Xeon 5500 series + * Bloomfield, Gainstown NHM-EP + */ + case 0x1E: /* Core i7 and i5 Processor + * Clarksfield, Lynnfield, Jasper Forest + */ + case 0x1F: /* Core i7 and i5 Processor - Nehalem */ + case 0x25: /* Westmere Client + * Clarkdale, Arrandale + */ + case 0x2C: /* Westmere EP - Gulftown */ + cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; + break; + case 0x2A: /* SNB */ + case 0x2D: /* SNB Xeon */ + case 0x3A: /* IVB */ + case 0x3E: /* IVB Xeon */ + cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; + cpu_info->caps |= CPUPOWER_CAP_IS_SNB; + break; + case 0x2E: /* Nehalem-EX Xeon - Beckton */ + case 0x2F: /* Westmere-EX Xeon - Eagleton */ + default: + break; + } + } + } + + /* printf("ID: %u - Extid: 0x%x - Caps: 0x%llx\n", + cpuid_level, ext_cpuid_level, cpu_info->caps); + */ + return ret; +} -- cgit v1.2.3