From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/scripts/Makefile.include | 181 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 tools/scripts/Makefile.include (limited to 'tools/scripts/Makefile.include') diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include new file mode 100644 index 000000000..0efb8f2b3 --- /dev/null +++ b/tools/scripts/Makefile.include @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: GPL-2.0 +ifneq ($(O),) +ifeq ($(origin O), command line) + dummy := $(if $(shell cd $(PWD); test -d $(O) || echo $(O)),$(error O=$(O) does not exist),) + ABSOLUTE_O := $(shell cd $(PWD); cd $(O) ; pwd) + OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/) + COMMAND_O := O=$(ABSOLUTE_O) +ifeq ($(objtree),) + objtree := $(O) +endif +endif +endif + +# check that the output directory actually exists +ifneq ($(OUTPUT),) +OUTDIR := $(shell cd $(OUTPUT) && pwd) +$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist)) +endif + +# +# Include saner warnings here, which can catch bugs: +# +EXTRA_WARNINGS := -Wbad-function-cast +EXTRA_WARNINGS += -Wdeclaration-after-statement +EXTRA_WARNINGS += -Wformat-security +EXTRA_WARNINGS += -Wformat-y2k +EXTRA_WARNINGS += -Winit-self +EXTRA_WARNINGS += -Wmissing-declarations +EXTRA_WARNINGS += -Wmissing-prototypes +EXTRA_WARNINGS += -Wnested-externs +EXTRA_WARNINGS += -Wno-system-headers +EXTRA_WARNINGS += -Wold-style-definition +EXTRA_WARNINGS += -Wpacked +EXTRA_WARNINGS += -Wredundant-decls +EXTRA_WARNINGS += -Wstrict-prototypes +EXTRA_WARNINGS += -Wswitch-default +EXTRA_WARNINGS += -Wswitch-enum +EXTRA_WARNINGS += -Wundef +EXTRA_WARNINGS += -Wwrite-strings +EXTRA_WARNINGS += -Wformat +EXTRA_WARNINGS += -Wno-type-limits + +# Makefiles suck: This macro sets a default value of $(2) for the +# variable named by $(1), unless the variable has been set by +# environment or command line. This is necessary for CC and AR +# because make sets default values, so the simpler ?= approach +# won't work as expected. +define allow-override + $(if $(or $(findstring environment,$(origin $(1))),\ + $(findstring command line,$(origin $(1)))),,\ + $(eval $(1) = $(2))) +endef + +ifneq ($(LLVM),) +ifneq ($(filter %/,$(LLVM)),) +LLVM_PREFIX := $(LLVM) +else ifneq ($(filter -%,$(LLVM)),) +LLVM_SUFFIX := $(LLVM) +endif + +$(call allow-override,CC,$(LLVM_PREFIX)clang$(LLVM_SUFFIX)) +$(call allow-override,AR,$(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX)) +$(call allow-override,LD,$(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX)) +$(call allow-override,CXX,$(LLVM_PREFIX)clang++$(LLVM_SUFFIX)) +$(call allow-override,STRIP,$(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)) +else +# Allow setting various cross-compile vars or setting CROSS_COMPILE as a prefix. +$(call allow-override,CC,$(CROSS_COMPILE)gcc) +$(call allow-override,AR,$(CROSS_COMPILE)ar) +$(call allow-override,LD,$(CROSS_COMPILE)ld) +$(call allow-override,CXX,$(CROSS_COMPILE)g++) +$(call allow-override,STRIP,$(CROSS_COMPILE)strip) +endif + +CC_NO_CLANG := $(shell $(CC) -dM -E -x c /dev/null | grep -Fq "__clang__"; echo $$?) + +ifneq ($(LLVM),) +HOSTAR ?= $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX) +HOSTCC ?= $(LLVM_PREFIX)clang$(LLVM_SUFFIX) +HOSTLD ?= $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX) +else +HOSTAR ?= ar +HOSTCC ?= gcc +HOSTLD ?= ld +endif + +# Some tools require Clang, LLC and/or LLVM utils +CLANG ?= clang +LLC ?= llc +LLVM_CONFIG ?= llvm-config +LLVM_OBJCOPY ?= llvm-objcopy +LLVM_STRIP ?= llvm-strip + +ifeq ($(CC_NO_CLANG), 1) +EXTRA_WARNINGS += -Wstrict-aliasing=3 + +else ifneq ($(CROSS_COMPILE),) +# Allow userspace to override CLANG_CROSS_FLAGS to specify their own +# sysroots and flags or to avoid the GCC call in pure Clang builds. +ifeq ($(CLANG_CROSS_FLAGS),) +CLANG_CROSS_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%)) +GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)gcc 2>/dev/null)) +ifneq ($(GCC_TOOLCHAIN_DIR),) +CLANG_CROSS_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE)) +CLANG_CROSS_FLAGS += --sysroot=$(shell $(CROSS_COMPILE)gcc -print-sysroot) +CLANG_CROSS_FLAGS += --gcc-toolchain=$(realpath $(GCC_TOOLCHAIN_DIR)/..) +endif # GCC_TOOLCHAIN_DIR +endif # CLANG_CROSS_FLAGS +CFLAGS += $(CLANG_CROSS_FLAGS) +AFLAGS += $(CLANG_CROSS_FLAGS) +endif # CROSS_COMPILE + +# Hack to avoid type-punned warnings on old systems such as RHEL5: +# We should be changing CFLAGS and checking gcc version, but this +# will do for now and keep the above -Wstrict-aliasing=3 in place +# in newer systems. +# Needed for the __raw_cmpxchg in tools/arch/x86/include/asm/cmpxchg.h +# +# See https://lore.kernel.org/lkml/9a8748490611281710g78402fbeh8ff7fcc162dbcbca@mail.gmail.com/ +# and https://gcc.gnu.org/gcc-4.8/changes.html, +# that takes into account Linus's comments (search for Wshadow) for the reasoning about +# -Wshadow not being interesting before gcc 4.8. + +ifneq ($(filter 3.%,$(MAKE_VERSION)),) # make-3 +EXTRA_WARNINGS += -fno-strict-aliasing +EXTRA_WARNINGS += -Wno-shadow +else +EXTRA_WARNINGS += -Wshadow +endif + +ifneq ($(findstring $(MAKEFLAGS), w),w) +PRINT_DIR = --no-print-directory +else +NO_SUBDIR = : +endif + +ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),) + silent=1 +endif + +# +# Define a callable command for descending to a new directory +# +# Call by doing: $(call descend,directory[,target]) +# +descend = \ + +mkdir -p $(OUTPUT)$(1) && \ + $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2) + +QUIET_SUBDIR0 = +$(MAKE) $(COMMAND_O) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(silent),1) + ifneq ($(V),1) + QUIET_CC = @echo ' CC '$@; + QUIET_CC_FPIC = @echo ' CC FPIC '$@; + QUIET_CLANG = @echo ' CLANG '$@; + QUIET_AR = @echo ' AR '$@; + QUIET_LINK = @echo ' LINK '$@; + QUIET_MKDIR = @echo ' MKDIR '$@; + QUIET_GEN = @echo ' GEN '$@; + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) \ + echo ' SUBDIR '$$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + QUIET_FLEX = @echo ' FLEX '$@; + QUIET_BISON = @echo ' BISON '$@; + QUIET_GENSKEL = @echo ' GENSKEL '$@; + + descend = \ + +@echo ' DESCEND '$(1); \ + mkdir -p $(OUTPUT)$(1) && \ + $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2) + + QUIET_CLEAN = @printf ' CLEAN %s\n' $1; + QUIET_INSTALL = @printf ' INSTALL %s\n' $1; + QUIET_UNINST = @printf ' UNINST %s\n' $1; + endif +endif + +pound := \# -- cgit v1.2.3