From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/memblock/tests/common.c | 209 ++++++++++++++++++++++++++++++++++ 1 file changed, 209 insertions(+) create mode 100644 tools/testing/memblock/tests/common.c (limited to 'tools/testing/memblock/tests/common.c') diff --git a/tools/testing/memblock/tests/common.c b/tools/testing/memblock/tests/common.c new file mode 100644 index 000000000..f43b6f414 --- /dev/null +++ b/tools/testing/memblock/tests/common.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +#include "tests/common.h" +#include +#include +#include +#include + +#define PREFIXES_MAX 15 +#define DELIM ": " +#define BASIS 10000 + +static struct test_memory memory_block; +static const char __maybe_unused *prefixes[PREFIXES_MAX]; +static int __maybe_unused nr_prefixes; + +static const char *short_opts = "hmv"; +static const struct option long_opts[] = { + {"help", 0, NULL, 'h'}, + {"movable-node", 0, NULL, 'm'}, + {"verbose", 0, NULL, 'v'}, + {NULL, 0, NULL, 0} +}; + +static const char * const help_opts[] = { + "display this help message and exit", + "disallow allocations from regions marked as hotplugged\n\t\t\t" + "by simulating enabling the \"movable_node\" kernel\n\t\t\t" + "parameter", + "enable verbose output, which includes the name of the\n\t\t\t" + "memblock function being tested, the name of the test,\n\t\t\t" + "and whether the test passed or failed." +}; + +static int verbose; + +/* sets global variable returned by movable_node_is_enabled() stub */ +bool movable_node_enabled; + +void reset_memblock_regions(void) +{ + memset(memblock.memory.regions, 0, + memblock.memory.cnt * sizeof(struct memblock_region)); + memblock.memory.cnt = 1; + memblock.memory.max = INIT_MEMBLOCK_REGIONS; + memblock.memory.total_size = 0; + + memset(memblock.reserved.regions, 0, + memblock.reserved.cnt * sizeof(struct memblock_region)); + memblock.reserved.cnt = 1; + memblock.reserved.max = INIT_MEMBLOCK_RESERVED_REGIONS; + memblock.reserved.total_size = 0; +} + +void reset_memblock_attributes(void) +{ + memblock.memory.name = "memory"; + memblock.reserved.name = "reserved"; + memblock.bottom_up = false; + memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE; +} + +static inline void fill_memblock(void) +{ + memset(memory_block.base, 1, MEM_SIZE); +} + +void setup_memblock(void) +{ + reset_memblock_regions(); + memblock_add((phys_addr_t)memory_block.base, MEM_SIZE); + fill_memblock(); +} + +/** + * setup_numa_memblock: + * Set up a memory layout with multiple NUMA nodes in a previously allocated + * dummy physical memory. + * @node_fracs: an array representing the fraction of MEM_SIZE contained in + * each node in basis point units (one hundredth of 1% or 1/10000). + * For example, if node 0 should contain 1/8 of MEM_SIZE, + * node_fracs[0] = 1250. + * + * The nids will be set to 0 through NUMA_NODES - 1. + */ +void setup_numa_memblock(const unsigned int node_fracs[]) +{ + phys_addr_t base; + int flags; + + reset_memblock_regions(); + base = (phys_addr_t)memory_block.base; + flags = (movable_node_is_enabled()) ? MEMBLOCK_NONE : MEMBLOCK_HOTPLUG; + + for (int i = 0; i < NUMA_NODES; i++) { + assert(node_fracs[i] <= BASIS); + phys_addr_t size = MEM_SIZE * node_fracs[i] / BASIS; + + memblock_add_node(base, size, i, flags); + base += size; + } + fill_memblock(); +} + +void dummy_physical_memory_init(void) +{ + memory_block.base = malloc(MEM_SIZE); + assert(memory_block.base); + fill_memblock(); +} + +void dummy_physical_memory_cleanup(void) +{ + free(memory_block.base); +} + +phys_addr_t dummy_physical_memory_base(void) +{ + return (phys_addr_t)memory_block.base; +} + +static void usage(const char *prog) +{ + BUILD_BUG_ON(ARRAY_SIZE(help_opts) != ARRAY_SIZE(long_opts) - 1); + + printf("Usage: %s [-%s]\n", prog, short_opts); + + for (int i = 0; long_opts[i].name; i++) { + printf(" -%c, --%-12s\t%s\n", long_opts[i].val, + long_opts[i].name, help_opts[i]); + } + + exit(1); +} + +void parse_args(int argc, char **argv) +{ + int c; + + while ((c = getopt_long_only(argc, argv, short_opts, long_opts, + NULL)) != -1) { + switch (c) { + case 'm': + movable_node_enabled = true; + break; + case 'v': + verbose = 1; + break; + default: + usage(argv[0]); + } + } +} + +void print_prefixes(const char *postfix) +{ + for (int i = 0; i < nr_prefixes; i++) + test_print("%s%s", prefixes[i], DELIM); + test_print(postfix); +} + +void test_fail(void) +{ + if (verbose) { + ksft_test_result_fail(": "); + print_prefixes("failed\n"); + } +} + +void test_pass(void) +{ + if (verbose) { + ksft_test_result_pass(": "); + print_prefixes("passed\n"); + } +} + +void test_print(const char *fmt, ...) +{ + if (verbose) { + int saved_errno = errno; + va_list args; + + va_start(args, fmt); + errno = saved_errno; + vprintf(fmt, args); + va_end(args); + } +} + +void prefix_reset(void) +{ + memset(prefixes, 0, PREFIXES_MAX * sizeof(char *)); + nr_prefixes = 0; +} + +void prefix_push(const char *prefix) +{ + assert(nr_prefixes < PREFIXES_MAX); + prefixes[nr_prefixes] = prefix; + nr_prefixes++; +} + +void prefix_pop(void) +{ + if (nr_prefixes > 0) { + prefixes[nr_prefixes - 1] = 0; + nr_prefixes--; + } +} -- cgit v1.2.3