From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/amd-pstate/gitsource.sh | 354 ++++++++++++++++++++++++ 1 file changed, 354 insertions(+) create mode 100755 tools/testing/selftests/amd-pstate/gitsource.sh (limited to 'tools/testing/selftests/amd-pstate/gitsource.sh') diff --git a/tools/testing/selftests/amd-pstate/gitsource.sh b/tools/testing/selftests/amd-pstate/gitsource.sh new file mode 100755 index 000000000..dbc1fe455 --- /dev/null +++ b/tools/testing/selftests/amd-pstate/gitsource.sh @@ -0,0 +1,354 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +# Testing and monitor the cpu desire performance, frequency, load, +# power consumption and throughput etc. when this script trigger +# gitsource test. +# 1) Download and tar gitsource codes. +# 2) Run gitsource benchmark on specific governors, ondemand or schedutil. +# 3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver. +# 4) Get desire performance, frequency, load by perf. +# 5) Get power consumption and throughput by amd_pstate_trace.py. +# 6) Get run time by /usr/bin/time. +# 7) Analyse test results and save it in file selftest.gitsource.csv. +#8) Plot png images about time, energy and performance per watt for each test. + +# protect against multiple inclusion +if [ $FILE_GITSOURCE ]; then + return 0 +else + FILE_GITSOURCE=DONE +fi + +git_name="git-2.15.1" +git_tar="$git_name.tar.gz" +gitsource_url="https://github.com/git/git/archive/refs/tags/v2.15.1.tar.gz" +gitsource_governors=("ondemand" "schedutil") + +# $1: governor, $2: round, $3: des-perf, $4: freq, $5: load, $6: time $7: energy, $8: PPW +store_csv_gitsource() +{ + echo "$1, $2, $3, $4, $5, $6, $7, $8" | tee -a $OUTFILE_GIT.csv > /dev/null 2>&1 +} + +# clear some special lines +clear_csv_gitsource() +{ + if [ -f $OUTFILE_GIT.csv ]; then + sed -i '/Comprison(%)/d' $OUTFILE_GIT.csv + sed -i "/$(scaling_name)/d" $OUTFILE_GIT.csv + fi +} + +# find string $1 in file csv and get the number of lines +get_lines_csv_gitsource() +{ + if [ -f $OUTFILE_GIT.csv ]; then + return `grep -c "$1" $OUTFILE_GIT.csv` + else + return 0 + fi +} + +pre_clear_gitsource() +{ + post_clear_gitsource + rm -rf gitsource_*.png + clear_csv_gitsource +} + +post_clear_gitsource() +{ + rm -rf results/tracer-gitsource* + rm -rf $OUTFILE_GIT*.log + rm -rf $OUTFILE_GIT*.result +} + +install_gitsource() +{ + if [ ! -d $git_name ]; then + printf "Download gitsource, please wait a moment ...\n\n" + wget -O $git_tar $gitsource_url > /dev/null 2>&1 + + printf "Tar gitsource ...\n\n" + tar -xzf $git_tar + fi +} + +# $1: governor, $2: loop +run_gitsource() +{ + echo "Launching amd pstate tracer for $1 #$2 tracer_interval: $TRACER_INTERVAL" + ./amd_pstate_trace.py -n tracer-gitsource-$1-$2 -i $TRACER_INTERVAL > /dev/null 2>&1 & + + printf "Make and test gitsource for $1 #$2 make_cpus: $MAKE_CPUS\n" + cd $git_name + perf stat -a --per-socket -I 1000 -e power/energy-pkg/ /usr/bin/time -o ../$OUTFILE_GIT.time-gitsource-$1-$2.log make test -j$MAKE_CPUS > ../$OUTFILE_GIT-perf-$1-$2.log 2>&1 + cd .. + + for job in `jobs -p` + do + echo "Waiting for job id $job" + wait $job + done +} + +# $1: governor, $2: loop +parse_gitsource() +{ + awk '{print $5}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-des-perf-$1-$2.log + avg_des_perf=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-des-perf-$1-$2.log) + printf "Gitsource-$1-#$2 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_GIT.result + + awk '{print $7}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-freq-$1-$2.log + avg_freq=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-freq-$1-$2.log) + printf "Gitsource-$1-#$2 avg freq: $avg_freq\n" | tee -a $OUTFILE_GIT.result + + awk '{print $11}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-load-$1-$2.log + avg_load=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-load-$1-$2.log) + printf "Gitsource-$1-#$2 avg load: $avg_load\n" | tee -a $OUTFILE_GIT.result + + grep user $OUTFILE_GIT.time-gitsource-$1-$2.log | awk '{print $1}' | sed -e 's/user//' > $OUTFILE_GIT-time-$1-$2.log + time_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-time-$1-$2.log) + printf "Gitsource-$1-#$2 user time(s): $time_sum\n" | tee -a $OUTFILE_GIT.result + + grep Joules $OUTFILE_GIT-perf-$1-$2.log | awk '{print $4}' > $OUTFILE_GIT-energy-$1-$2.log + en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-energy-$1-$2.log) + printf "Gitsource-$1-#$2 power consumption(J): $en_sum\n" | tee -a $OUTFILE_GIT.result + + # Permance is the number of run gitsource per second, denoted 1/t, where 1 is the number of run gitsource in t + # senconds. It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J), + # and t is time measured in seconds(s). This means that performance per watt becomes + # 1/t 1/t 1 + # ----- = ----- = --- + # P E/t E + # with unit given by 1 per joule. + ppw=`echo "scale=9;1/$en_sum" | bc | awk '{printf "%.9f", $0}'` + printf "Gitsource-$1-#$2 performance per watt(1/J): $ppw\n" | tee -a $OUTFILE_GIT.result + printf "\n" | tee -a $OUTFILE_GIT.result + + driver_name=`echo $(scaling_name)` + store_csv_gitsource "$driver_name-$1" $2 $avg_des_perf $avg_freq $avg_load $time_sum $en_sum $ppw +} + +# $1: governor +loop_gitsource() +{ + printf "\nGitsource total test times is $LOOP_TIMES for $1\n\n" + for i in `seq 1 $LOOP_TIMES` + do + run_gitsource $1 $i + parse_gitsource $1 $i + done +} + +# $1: governor +gather_gitsource() +{ + printf "Gitsource test result for $1 (loops:$LOOP_TIMES)" | tee -a $OUTFILE_GIT.result + printf "\n--------------------------------------------------\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg des perf:" | awk '{print $NF}' > $OUTFILE_GIT-des-perf-$1.log + avg_des_perf=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-des-perf-$1.log) + printf "Gitsource-$1 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg freq:" | awk '{print $NF}' > $OUTFILE_GIT-freq-$1.log + avg_freq=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-freq-$1.log) + printf "Gitsource-$1 avg freq: $avg_freq\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg load:" | awk '{print $NF}' > $OUTFILE_GIT-load-$1.log + avg_load=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-load-$1.log) + printf "Gitsource-$1 avg load: $avg_load\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "user time(s):" | awk '{print $NF}' > $OUTFILE_GIT-time-$1.log + time_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-time-$1.log) + printf "Gitsource-$1 total user time(s): $time_sum\n" | tee -a $OUTFILE_GIT.result + + avg_time=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-time-$1.log) + printf "Gitsource-$1 avg user times(s): $avg_time\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "power consumption(J):" | awk '{print $NF}' > $OUTFILE_GIT-energy-$1.log + en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-energy-$1.log) + printf "Gitsource-$1 total power consumption(J): $en_sum\n" | tee -a $OUTFILE_GIT.result + + avg_en=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-energy-$1.log) + printf "Gitsource-$1 avg power consumption(J): $avg_en\n" | tee -a $OUTFILE_GIT.result + + # Permance is the number of run gitsource per second, denoted 1/t, where 1 is the number of run gitsource in t + # senconds. It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J), + # and t is time measured in seconds(s). This means that performance per watt becomes + # 1/t 1/t 1 + # ----- = ----- = --- + # P E/t E + # with unit given by 1 per joule. + ppw=`echo "scale=9;1/$avg_en" | bc | awk '{printf "%.9f", $0}'` + printf "Gitsource-$1 performance per watt(1/J): $ppw\n" | tee -a $OUTFILE_GIT.result + printf "\n" | tee -a $OUTFILE_GIT.result + + driver_name=`echo $(scaling_name)` + store_csv_gitsource "$driver_name-$1" "Average" $avg_des_perf $avg_freq $avg_load $avg_time $avg_en $ppw +} + +# $1: base scaling_driver $2: base governor $3: comparison scaling_driver $4: comparison governor +__calc_comp_gitsource() +{ + base=`grep "$1-$2" $OUTFILE_GIT.csv | grep "Average"` + comp=`grep "$3-$4" $OUTFILE_GIT.csv | grep "Average"` + + if [ -n "$base" -a -n "$comp" ]; then + printf "\n==================================================\n" | tee -a $OUTFILE_GIT.result + printf "Gitsource comparison $1-$2 VS $3-$4" | tee -a $OUTFILE_GIT.result + printf "\n==================================================\n" | tee -a $OUTFILE_GIT.result + + # get the base values + des_perf_base=`echo "$base" | awk '{print $3}' | sed s/,//` + freq_base=`echo "$base" | awk '{print $4}' | sed s/,//` + load_base=`echo "$base" | awk '{print $5}' | sed s/,//` + time_base=`echo "$base" | awk '{print $6}' | sed s/,//` + energy_base=`echo "$base" | awk '{print $7}' | sed s/,//` + ppw_base=`echo "$base" | awk '{print $8}' | sed s/,//` + + # get the comparison values + des_perf_comp=`echo "$comp" | awk '{print $3}' | sed s/,//` + freq_comp=`echo "$comp" | awk '{print $4}' | sed s/,//` + load_comp=`echo "$comp" | awk '{print $5}' | sed s/,//` + time_comp=`echo "$comp" | awk '{print $6}' | sed s/,//` + energy_comp=`echo "$comp" | awk '{print $7}' | sed s/,//` + ppw_comp=`echo "$comp" | awk '{print $8}' | sed s/,//` + + # compare the base and comp values + des_perf_drop=`echo "scale=4;($des_perf_comp-$des_perf_base)*100/$des_perf_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 des perf base: $des_perf_base comprison: $des_perf_comp percent: $des_perf_drop\n" | tee -a $OUTFILE_GIT.result + + freq_drop=`echo "scale=4;($freq_comp-$freq_base)*100/$freq_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 freq base: $freq_base comprison: $freq_comp percent: $freq_drop\n" | tee -a $OUTFILE_GIT.result + + load_drop=`echo "scale=4;($load_comp-$load_base)*100/$load_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 load base: $load_base comprison: $load_comp percent: $load_drop\n" | tee -a $OUTFILE_GIT.result + + time_drop=`echo "scale=4;($time_comp-$time_base)*100/$time_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 time base: $time_base comprison: $time_comp percent: $time_drop\n" | tee -a $OUTFILE_GIT.result + + energy_drop=`echo "scale=4;($energy_comp-$energy_base)*100/$energy_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 energy base: $energy_base comprison: $energy_comp percent: $energy_drop\n" | tee -a $OUTFILE_GIT.result + + ppw_drop=`echo "scale=4;($ppw_comp-$ppw_base)*100/$ppw_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 performance per watt base: $ppw_base comprison: $ppw_comp percent: $ppw_drop\n" | tee -a $OUTFILE_GIT.result + printf "\n" | tee -a $OUTFILE_GIT.result + + store_csv_gitsource "$1-$2 VS $3-$4" "Comprison(%)" "$des_perf_drop" "$freq_drop" "$load_drop" "$time_drop" "$energy_drop" "$ppw_drop" + fi +} + +# calculate the comparison(%) +calc_comp_gitsource() +{ + # acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil + __calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[0]} ${all_scaling_names[0]} ${gitsource_governors[1]} + + # amd-pstate-ondemand VS amd-pstate-schedutil + __calc_comp_gitsource ${all_scaling_names[1]} ${gitsource_governors[0]} ${all_scaling_names[1]} ${gitsource_governors[1]} + + # acpi-cpufreq-ondemand VS amd-pstate-ondemand + __calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[0]} ${all_scaling_names[1]} ${gitsource_governors[0]} + + # acpi-cpufreq-schedutil VS amd-pstate-schedutil + __calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[1]} ${all_scaling_names[1]} ${gitsource_governors[1]} +} + +# $1: file_name, $2: title, $3: ylable, $4: column +plot_png_gitsource() +{ + # all_scaling_names[1] all_scaling_names[0] flag + # amd-pstate acpi-cpufreq + # N N 0 + # N Y 1 + # Y N 2 + # Y Y 3 + ret=`grep -c "${all_scaling_names[1]}" $OUTFILE_GIT.csv` + if [ $ret -eq 0 ]; then + ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_GIT.csv` + if [ $ret -eq 0 ]; then + flag=0 + else + flag=1 + fi + else + ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_GIT.csv` + if [ $ret -eq 0 ]; then + flag=2 + else + flag=3 + fi + fi + + gnuplot << EOF + set term png + set output "$1" + + set title "$2" + set xlabel "Test Cycles (round)" + set ylabel "$3" + + set grid + set style data histogram + set style fill solid 0.5 border + set boxwidth 0.8 + + if ($flag == 1) { + plot \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[1]}" + } else { + if ($flag == 2) { + plot \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[1]}" + } else { + if ($flag == 3 ) { + plot \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[1]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[1]}" + } + } + } + quit +EOF +} + +amd_pstate_gitsource() +{ + printf "\n---------------------------------------------\n" + printf "*** Running gitsource ***" + printf "\n---------------------------------------------\n" + + pre_clear_gitsource + + install_gitsource + + get_lines_csv_gitsource "Governor" + if [ $? -eq 0 ]; then + # add titles and unit for csv file + store_csv_gitsource "Governor" "Round" "Des-perf" "Freq" "Load" "Time" "Energy" "Performance Per Watt" + store_csv_gitsource "Unit" "" "" "GHz" "" "s" "J" "1/J" + fi + + backup_governor + for governor in ${gitsource_governors[*]} ; do + printf "\nSpecified governor is $governor\n\n" + switch_governor $governor + loop_gitsource $governor + gather_gitsource $governor + done + restore_governor + + plot_png_gitsource "gitsource_time.png" "Gitsource Benchmark Time" "Time (s)" 6 + plot_png_gitsource "gitsource_energy.png" "Gitsource Benchmark Energy" "Energy (J)" 7 + plot_png_gitsource "gitsource_ppw.png" "Gitsource Benchmark Performance Per Watt" "Performance Per Watt (1/J)" 8 + + calc_comp_gitsource + + post_clear_gitsource +} -- cgit v1.2.3