From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/bpf/prog_tests/snprintf.c | 127 ++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/snprintf.c (limited to 'tools/testing/selftests/bpf/prog_tests/snprintf.c') diff --git a/tools/testing/selftests/bpf/prog_tests/snprintf.c b/tools/testing/selftests/bpf/prog_tests/snprintf.c new file mode 100644 index 000000000..4be6fdb78 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/snprintf.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2021 Google LLC. */ + +#include +#include "test_snprintf.skel.h" +#include "test_snprintf_single.skel.h" + +#define EXP_NUM_OUT "-8 9 96 -424242 1337 DABBAD00" +#define EXP_NUM_RET sizeof(EXP_NUM_OUT) + +#define EXP_IP_OUT "127.000.000.001 0000:0000:0000:0000:0000:0000:0000:0001" +#define EXP_IP_RET sizeof(EXP_IP_OUT) + +/* The third specifier, %pB, depends on compiler inlining so don't check it */ +#define EXP_SYM_OUT "schedule schedule+0x0/" +#define MIN_SYM_RET sizeof(EXP_SYM_OUT) + +/* The third specifier, %p, is a hashed pointer which changes on every reboot */ +#define EXP_ADDR_OUT "0000000000000000 ffff00000add4e55 " +#define EXP_ADDR_RET sizeof(EXP_ADDR_OUT "unknownhashedptr") + +#define EXP_STR_OUT "str1 a b c d e longstr" +#define EXP_STR_RET sizeof(EXP_STR_OUT) + +#define EXP_OVER_OUT "%over" +#define EXP_OVER_RET 10 + +#define EXP_PAD_OUT " 4 000" +#define EXP_PAD_RET 900007 + +#define EXP_NO_ARG_OUT "simple case" +#define EXP_NO_ARG_RET 12 + +#define EXP_NO_BUF_RET 29 + +static void test_snprintf_positive(void) +{ + char exp_addr_out[] = EXP_ADDR_OUT; + char exp_sym_out[] = EXP_SYM_OUT; + struct test_snprintf *skel; + + skel = test_snprintf__open_and_load(); + if (!ASSERT_OK_PTR(skel, "skel_open")) + return; + + skel->bss->pid = getpid(); + + if (!ASSERT_OK(test_snprintf__attach(skel), "skel_attach")) + goto cleanup; + + /* trigger tracepoint */ + usleep(1); + + ASSERT_STREQ(skel->bss->num_out, EXP_NUM_OUT, "num_out"); + ASSERT_EQ(skel->bss->num_ret, EXP_NUM_RET, "num_ret"); + + ASSERT_STREQ(skel->bss->ip_out, EXP_IP_OUT, "ip_out"); + ASSERT_EQ(skel->bss->ip_ret, EXP_IP_RET, "ip_ret"); + + ASSERT_OK(memcmp(skel->bss->sym_out, exp_sym_out, + sizeof(exp_sym_out) - 1), "sym_out"); + ASSERT_LT(MIN_SYM_RET, skel->bss->sym_ret, "sym_ret"); + + ASSERT_OK(memcmp(skel->bss->addr_out, exp_addr_out, + sizeof(exp_addr_out) - 1), "addr_out"); + ASSERT_EQ(skel->bss->addr_ret, EXP_ADDR_RET, "addr_ret"); + + ASSERT_STREQ(skel->bss->str_out, EXP_STR_OUT, "str_out"); + ASSERT_EQ(skel->bss->str_ret, EXP_STR_RET, "str_ret"); + + ASSERT_STREQ(skel->bss->over_out, EXP_OVER_OUT, "over_out"); + ASSERT_EQ(skel->bss->over_ret, EXP_OVER_RET, "over_ret"); + + ASSERT_STREQ(skel->bss->pad_out, EXP_PAD_OUT, "pad_out"); + ASSERT_EQ(skel->bss->pad_ret, EXP_PAD_RET, "pad_ret"); + + ASSERT_STREQ(skel->bss->noarg_out, EXP_NO_ARG_OUT, "no_arg_out"); + ASSERT_EQ(skel->bss->noarg_ret, EXP_NO_ARG_RET, "no_arg_ret"); + + ASSERT_EQ(skel->bss->nobuf_ret, EXP_NO_BUF_RET, "no_buf_ret"); + +cleanup: + test_snprintf__destroy(skel); +} + +/* Loads an eBPF object calling bpf_snprintf with up to 10 characters of fmt */ +static int load_single_snprintf(char *fmt) +{ + struct test_snprintf_single *skel; + int ret; + + skel = test_snprintf_single__open(); + if (!skel) + return -EINVAL; + + memcpy(skel->rodata->fmt, fmt, MIN(strlen(fmt) + 1, 10)); + + ret = test_snprintf_single__load(skel); + test_snprintf_single__destroy(skel); + + return ret; +} + +static void test_snprintf_negative(void) +{ + ASSERT_OK(load_single_snprintf("valid %d"), "valid usage"); + + ASSERT_ERR(load_single_snprintf("0123456789"), "no terminating zero"); + ASSERT_ERR(load_single_snprintf("%d %d"), "too many specifiers"); + ASSERT_ERR(load_single_snprintf("%pi5"), "invalid specifier 1"); + ASSERT_ERR(load_single_snprintf("%a"), "invalid specifier 2"); + ASSERT_ERR(load_single_snprintf("%"), "invalid specifier 3"); + ASSERT_ERR(load_single_snprintf("%12345678"), "invalid specifier 4"); + ASSERT_ERR(load_single_snprintf("%--------"), "invalid specifier 5"); + ASSERT_ERR(load_single_snprintf("%lc"), "invalid specifier 6"); + ASSERT_ERR(load_single_snprintf("%llc"), "invalid specifier 7"); + ASSERT_ERR(load_single_snprintf("\x80"), "non ascii character"); + ASSERT_ERR(load_single_snprintf("\x1"), "non printable character"); +} + +void test_snprintf(void) +{ + if (test__start_subtest("snprintf_positive")) + test_snprintf_positive(); + if (test__start_subtest("snprintf_negative")) + test_snprintf_negative(); +} -- cgit v1.2.3