From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/bpf/sdt.h | 513 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 513 insertions(+) create mode 100644 tools/testing/selftests/bpf/sdt.h (limited to 'tools/testing/selftests/bpf/sdt.h') diff --git a/tools/testing/selftests/bpf/sdt.h b/tools/testing/selftests/bpf/sdt.h new file mode 100644 index 000000000..ca0162b4d --- /dev/null +++ b/tools/testing/selftests/bpf/sdt.h @@ -0,0 +1,513 @@ +/* - Systemtap static probe definition macros. + + This file is dedicated to the public domain, pursuant to CC0 + (https://creativecommons.org/publicdomain/zero/1.0/) +*/ + +#ifndef _SYS_SDT_H +#define _SYS_SDT_H 1 + +/* + This file defines a family of macros + + STAP_PROBEn(op1, ..., opn) + + that emit a nop into the instruction stream, and some data into an auxiliary + note section. The data in the note section describes the operands, in terms + of size and location. Each location is encoded as assembler operand string. + Consumer tools such as gdb or systemtap insert breakpoints on top of + the nop, and decode the location operand-strings, like an assembler, + to find the values being passed. + + The operand strings are selected by the compiler for each operand. + They are constrained by gcc inline-assembler codes. The default is: + + #define STAP_SDT_ARG_CONSTRAINT nor + + This is a good default if the operands tend to be integral and + moderate in number (smaller than number of registers). In other + cases, the compiler may report "'asm' requires impossible reload" or + similar. In this case, consider simplifying the macro call (fewer + and simpler operands), reduce optimization, or override the default + constraints string via: + + #define STAP_SDT_ARG_CONSTRAINT g + #include + + See also: + https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation + https://gcc.gnu.org/onlinedocs/gcc/Constraints.html + */ + + + +#ifdef __ASSEMBLER__ +# define _SDT_PROBE(provider, name, n, arglist) \ + _SDT_ASM_BODY(provider, name, _SDT_ASM_SUBSTR_1, (_SDT_DEPAREN_##n arglist)) \ + _SDT_ASM_BASE +# define _SDT_ASM_1(x) x; +# define _SDT_ASM_2(a, b) a,b; +# define _SDT_ASM_3(a, b, c) a,b,c; +# define _SDT_ASM_5(a, b, c, d, e) a,b,c,d,e; +# define _SDT_ASM_STRING_1(x) .asciz #x; +# define _SDT_ASM_SUBSTR_1(x) .ascii #x; +# define _SDT_DEPAREN_0() /* empty */ +# define _SDT_DEPAREN_1(a) a +# define _SDT_DEPAREN_2(a,b) a b +# define _SDT_DEPAREN_3(a,b,c) a b c +# define _SDT_DEPAREN_4(a,b,c,d) a b c d +# define _SDT_DEPAREN_5(a,b,c,d,e) a b c d e +# define _SDT_DEPAREN_6(a,b,c,d,e,f) a b c d e f +# define _SDT_DEPAREN_7(a,b,c,d,e,f,g) a b c d e f g +# define _SDT_DEPAREN_8(a,b,c,d,e,f,g,h) a b c d e f g h +# define _SDT_DEPAREN_9(a,b,c,d,e,f,g,h,i) a b c d e f g h i +# define _SDT_DEPAREN_10(a,b,c,d,e,f,g,h,i,j) a b c d e f g h i j +# define _SDT_DEPAREN_11(a,b,c,d,e,f,g,h,i,j,k) a b c d e f g h i j k +# define _SDT_DEPAREN_12(a,b,c,d,e,f,g,h,i,j,k,l) a b c d e f g h i j k l +#else +#if defined _SDT_HAS_SEMAPHORES +#define _SDT_NOTE_SEMAPHORE_USE(provider, name) \ + __asm__ __volatile__ ("" :: "m" (provider##_##name##_semaphore)); +#else +#define _SDT_NOTE_SEMAPHORE_USE(provider, name) +#endif + +# define _SDT_PROBE(provider, name, n, arglist) \ + do { \ + _SDT_NOTE_SEMAPHORE_USE(provider, name); \ + __asm__ __volatile__ (_SDT_ASM_BODY(provider, name, _SDT_ASM_ARGS, (n)) \ + :: _SDT_ASM_OPERANDS_##n arglist); \ + __asm__ __volatile__ (_SDT_ASM_BASE); \ + } while (0) +# define _SDT_S(x) #x +# define _SDT_ASM_1(x) _SDT_S(x) "\n" +# define _SDT_ASM_2(a, b) _SDT_S(a) "," _SDT_S(b) "\n" +# define _SDT_ASM_3(a, b, c) _SDT_S(a) "," _SDT_S(b) "," \ + _SDT_S(c) "\n" +# define _SDT_ASM_5(a, b, c, d, e) _SDT_S(a) "," _SDT_S(b) "," \ + _SDT_S(c) "," _SDT_S(d) "," \ + _SDT_S(e) "\n" +# define _SDT_ASM_ARGS(n) _SDT_ASM_TEMPLATE_##n +# define _SDT_ASM_STRING_1(x) _SDT_ASM_1(.asciz #x) +# define _SDT_ASM_SUBSTR_1(x) _SDT_ASM_1(.ascii #x) + +# define _SDT_ARGFMT(no) _SDT_ASM_1(_SDT_SIGN %n[_SDT_S##no]) \ + _SDT_ASM_1(_SDT_SIZE %n[_SDT_S##no]) \ + _SDT_ASM_1(_SDT_TYPE %n[_SDT_S##no]) \ + _SDT_ASM_SUBSTR(_SDT_ARGTMPL(_SDT_A##no)) + + +# ifndef STAP_SDT_ARG_CONSTRAINT +# if defined __powerpc__ +# define STAP_SDT_ARG_CONSTRAINT nZr +# elif defined __arm__ +# define STAP_SDT_ARG_CONSTRAINT g +# else +# define STAP_SDT_ARG_CONSTRAINT nor +# endif +# endif + +# define _SDT_STRINGIFY(x) #x +# define _SDT_ARG_CONSTRAINT_STRING(x) _SDT_STRINGIFY(x) +/* _SDT_S encodes the size and type as 0xSSTT which is decoded by the assembler + macros _SDT_SIZE and _SDT_TYPE */ +# define _SDT_ARG(n, x) \ + [_SDT_S##n] "n" ((_SDT_ARGSIGNED (x) ? (int)-1 : 1) * (-(((int) _SDT_ARGSIZE (x)) << 8) + (-(0x7f & __builtin_classify_type (x))))), \ + [_SDT_A##n] _SDT_ARG_CONSTRAINT_STRING (STAP_SDT_ARG_CONSTRAINT) (_SDT_ARGVAL (x)) +#endif +#define _SDT_ASM_STRING(x) _SDT_ASM_STRING_1(x) +#define _SDT_ASM_SUBSTR(x) _SDT_ASM_SUBSTR_1(x) + +#define _SDT_ARGARRAY(x) (__builtin_classify_type (x) == 14 \ + || __builtin_classify_type (x) == 5) + +#ifdef __cplusplus +# define _SDT_ARGSIGNED(x) (!_SDT_ARGARRAY (x) \ + && __sdt_type<__typeof (x)>::__sdt_signed) +# define _SDT_ARGSIZE(x) (_SDT_ARGARRAY (x) \ + ? sizeof (void *) : sizeof (x)) +# define _SDT_ARGVAL(x) (x) + +# include + +template +struct __sdt_type +{ + static const bool __sdt_signed = false; +}; + +#define __SDT_ALWAYS_SIGNED(T) \ +template<> struct __sdt_type { static const bool __sdt_signed = true; }; +#define __SDT_COND_SIGNED(T,CT) \ +template<> struct __sdt_type { static const bool __sdt_signed = ((CT)(-1) < 1); }; +__SDT_ALWAYS_SIGNED(signed char) +__SDT_ALWAYS_SIGNED(short) +__SDT_ALWAYS_SIGNED(int) +__SDT_ALWAYS_SIGNED(long) +__SDT_ALWAYS_SIGNED(long long) +__SDT_ALWAYS_SIGNED(volatile signed char) +__SDT_ALWAYS_SIGNED(volatile short) +__SDT_ALWAYS_SIGNED(volatile int) +__SDT_ALWAYS_SIGNED(volatile long) +__SDT_ALWAYS_SIGNED(volatile long long) +__SDT_ALWAYS_SIGNED(const signed char) +__SDT_ALWAYS_SIGNED(const short) +__SDT_ALWAYS_SIGNED(const int) +__SDT_ALWAYS_SIGNED(const long) +__SDT_ALWAYS_SIGNED(const long long) +__SDT_ALWAYS_SIGNED(const volatile signed char) +__SDT_ALWAYS_SIGNED(const volatile short) +__SDT_ALWAYS_SIGNED(const volatile int) +__SDT_ALWAYS_SIGNED(const volatile long) +__SDT_ALWAYS_SIGNED(const volatile long long) +__SDT_COND_SIGNED(char, char) +__SDT_COND_SIGNED(wchar_t, wchar_t) +__SDT_COND_SIGNED(volatile char, char) +__SDT_COND_SIGNED(volatile wchar_t, wchar_t) +__SDT_COND_SIGNED(const char, char) +__SDT_COND_SIGNED(const wchar_t, wchar_t) +__SDT_COND_SIGNED(const volatile char, char) +__SDT_COND_SIGNED(const volatile wchar_t, wchar_t) +#if defined (__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4)) +/* __SDT_COND_SIGNED(char16_t) */ +/* __SDT_COND_SIGNED(char32_t) */ +#endif + +template +struct __sdt_type<__sdt_E[]> : public __sdt_type<__sdt_E *> {}; + +template +struct __sdt_type<__sdt_E[__sdt_N]> : public __sdt_type<__sdt_E *> {}; + +#elif !defined(__ASSEMBLER__) +__extension__ extern unsigned long long __sdt_unsp; +# define _SDT_ARGINTTYPE(x) \ + __typeof (__builtin_choose_expr (((__builtin_classify_type (x) \ + + 3) & -4) == 4, (x), 0U)) +# define _SDT_ARGSIGNED(x) \ + (!__extension__ \ + (__builtin_constant_p ((((unsigned long long) \ + (_SDT_ARGINTTYPE (x)) __sdt_unsp) \ + & ((unsigned long long)1 << (sizeof (unsigned long long) \ + * __CHAR_BIT__ - 1))) == 0) \ + || (_SDT_ARGINTTYPE (x)) -1 > (_SDT_ARGINTTYPE (x)) 0)) +# define _SDT_ARGSIZE(x) \ + (_SDT_ARGARRAY (x) ? sizeof (void *) : sizeof (x)) +# define _SDT_ARGVAL(x) (x) +#endif + +#if defined __powerpc__ || defined __powerpc64__ +# define _SDT_ARGTMPL(id) %I[id]%[id] +#elif defined __i386__ +# define _SDT_ARGTMPL(id) %k[id] /* gcc.gnu.org/PR80115 sourceware.org/PR24541 */ +#else +# define _SDT_ARGTMPL(id) %[id] +#endif + +/* NB: gdb PR24541 highlighted an unspecified corner of the sdt.h + operand note format. + + The named register may be a longer or shorter (!) alias for the + storage where the value in question is found. For example, on + i386, 64-bit value may be put in register pairs, and the register + name stored would identify just one of them. Previously, gcc was + asked to emit the %w[id] (16-bit alias of some registers holding + operands), even when a wider 32-bit value was used. + + Bottom line: the byte-width given before the @ sign governs. If + there is a mismatch between that width and that of the named + register, then a sys/sdt.h note consumer may need to employ + architecture-specific heuristics to figure out where the compiler + has actually put the complete value. +*/ + +#ifdef __LP64__ +# define _SDT_ASM_ADDR .8byte +#else +# define _SDT_ASM_ADDR .4byte +#endif + +/* The ia64 and s390 nop instructions take an argument. */ +#if defined(__ia64__) || defined(__s390__) || defined(__s390x__) +#define _SDT_NOP nop 0 +#else +#define _SDT_NOP nop +#endif + +#define _SDT_NOTE_NAME "stapsdt" +#define _SDT_NOTE_TYPE 3 + +/* If the assembler supports the necessary feature, then we can play + nice with code in COMDAT sections, which comes up in C++ code. + Without that assembler support, some combinations of probe placements + in certain kinds of C++ code may produce link-time errors. */ +#include "sdt-config.h" +#if _SDT_ASM_SECTION_AUTOGROUP_SUPPORT +# define _SDT_ASM_AUTOGROUP "?" +#else +# define _SDT_ASM_AUTOGROUP "" +#endif + +#define _SDT_DEF_MACROS \ + _SDT_ASM_1(.altmacro) \ + _SDT_ASM_1(.macro _SDT_SIGN x) \ + _SDT_ASM_3(.pushsection .note.stapsdt,"","note") \ + _SDT_ASM_1(.iflt \\x) \ + _SDT_ASM_1(.ascii "-") \ + _SDT_ASM_1(.endif) \ + _SDT_ASM_1(.popsection) \ + _SDT_ASM_1(.endm) \ + _SDT_ASM_1(.macro _SDT_SIZE_ x) \ + _SDT_ASM_3(.pushsection .note.stapsdt,"","note") \ + _SDT_ASM_1(.ascii "\x") \ + _SDT_ASM_1(.popsection) \ + _SDT_ASM_1(.endm) \ + _SDT_ASM_1(.macro _SDT_SIZE x) \ + _SDT_ASM_1(_SDT_SIZE_ %%((-(-\\x*((-\\x>0)-(-\\x<0))))>>8)) \ + _SDT_ASM_1(.endm) \ + _SDT_ASM_1(.macro _SDT_TYPE_ x) \ + _SDT_ASM_3(.pushsection .note.stapsdt,"","note") \ + _SDT_ASM_2(.ifc 8,\\x) \ + _SDT_ASM_1(.ascii "f") \ + _SDT_ASM_1(.endif) \ + _SDT_ASM_1(.ascii "@") \ + _SDT_ASM_1(.popsection) \ + _SDT_ASM_1(.endm) \ + _SDT_ASM_1(.macro _SDT_TYPE x) \ + _SDT_ASM_1(_SDT_TYPE_ %%((\\x)&(0xff))) \ + _SDT_ASM_1(.endm) + +#define _SDT_UNDEF_MACROS \ + _SDT_ASM_1(.purgem _SDT_SIGN) \ + _SDT_ASM_1(.purgem _SDT_SIZE_) \ + _SDT_ASM_1(.purgem _SDT_SIZE) \ + _SDT_ASM_1(.purgem _SDT_TYPE_) \ + _SDT_ASM_1(.purgem _SDT_TYPE) + +#define _SDT_ASM_BODY(provider, name, pack_args, args, ...) \ + _SDT_DEF_MACROS \ + _SDT_ASM_1(990: _SDT_NOP) \ + _SDT_ASM_3( .pushsection .note.stapsdt,_SDT_ASM_AUTOGROUP,"note") \ + _SDT_ASM_1( .balign 4) \ + _SDT_ASM_3( .4byte 992f-991f, 994f-993f, _SDT_NOTE_TYPE) \ + _SDT_ASM_1(991: .asciz _SDT_NOTE_NAME) \ + _SDT_ASM_1(992: .balign 4) \ + _SDT_ASM_1(993: _SDT_ASM_ADDR 990b) \ + _SDT_ASM_1( _SDT_ASM_ADDR _.stapsdt.base) \ + _SDT_SEMAPHORE(provider,name) \ + _SDT_ASM_STRING(provider) \ + _SDT_ASM_STRING(name) \ + pack_args args \ + _SDT_ASM_SUBSTR(\x00) \ + _SDT_UNDEF_MACROS \ + _SDT_ASM_1(994: .balign 4) \ + _SDT_ASM_1( .popsection) + +#define _SDT_ASM_BASE \ + _SDT_ASM_1(.ifndef _.stapsdt.base) \ + _SDT_ASM_5( .pushsection .stapsdt.base,"aG","progbits", \ + .stapsdt.base,comdat) \ + _SDT_ASM_1( .weak _.stapsdt.base) \ + _SDT_ASM_1( .hidden _.stapsdt.base) \ + _SDT_ASM_1( _.stapsdt.base: .space 1) \ + _SDT_ASM_2( .size _.stapsdt.base, 1) \ + _SDT_ASM_1( .popsection) \ + _SDT_ASM_1(.endif) + +#if defined _SDT_HAS_SEMAPHORES +#define _SDT_SEMAPHORE(p,n) \ + _SDT_ASM_1( _SDT_ASM_ADDR p##_##n##_semaphore) +#else +#define _SDT_SEMAPHORE(p,n) _SDT_ASM_1( _SDT_ASM_ADDR 0) +#endif + +#define _SDT_ASM_BLANK _SDT_ASM_SUBSTR(\x20) +#define _SDT_ASM_TEMPLATE_0 /* no arguments */ +#define _SDT_ASM_TEMPLATE_1 _SDT_ARGFMT(1) +#define _SDT_ASM_TEMPLATE_2 _SDT_ASM_TEMPLATE_1 _SDT_ASM_BLANK _SDT_ARGFMT(2) +#define _SDT_ASM_TEMPLATE_3 _SDT_ASM_TEMPLATE_2 _SDT_ASM_BLANK _SDT_ARGFMT(3) +#define _SDT_ASM_TEMPLATE_4 _SDT_ASM_TEMPLATE_3 _SDT_ASM_BLANK _SDT_ARGFMT(4) +#define _SDT_ASM_TEMPLATE_5 _SDT_ASM_TEMPLATE_4 _SDT_ASM_BLANK _SDT_ARGFMT(5) +#define _SDT_ASM_TEMPLATE_6 _SDT_ASM_TEMPLATE_5 _SDT_ASM_BLANK _SDT_ARGFMT(6) +#define _SDT_ASM_TEMPLATE_7 _SDT_ASM_TEMPLATE_6 _SDT_ASM_BLANK _SDT_ARGFMT(7) +#define _SDT_ASM_TEMPLATE_8 _SDT_ASM_TEMPLATE_7 _SDT_ASM_BLANK _SDT_ARGFMT(8) +#define _SDT_ASM_TEMPLATE_9 _SDT_ASM_TEMPLATE_8 _SDT_ASM_BLANK _SDT_ARGFMT(9) +#define _SDT_ASM_TEMPLATE_10 _SDT_ASM_TEMPLATE_9 _SDT_ASM_BLANK _SDT_ARGFMT(10) +#define _SDT_ASM_TEMPLATE_11 _SDT_ASM_TEMPLATE_10 _SDT_ASM_BLANK _SDT_ARGFMT(11) +#define _SDT_ASM_TEMPLATE_12 _SDT_ASM_TEMPLATE_11 _SDT_ASM_BLANK _SDT_ARGFMT(12) +#define _SDT_ASM_OPERANDS_0() [__sdt_dummy] "g" (0) +#define _SDT_ASM_OPERANDS_1(arg1) _SDT_ARG(1, arg1) +#define _SDT_ASM_OPERANDS_2(arg1, arg2) \ + _SDT_ASM_OPERANDS_1(arg1), _SDT_ARG(2, arg2) +#define _SDT_ASM_OPERANDS_3(arg1, arg2, arg3) \ + _SDT_ASM_OPERANDS_2(arg1, arg2), _SDT_ARG(3, arg3) +#define _SDT_ASM_OPERANDS_4(arg1, arg2, arg3, arg4) \ + _SDT_ASM_OPERANDS_3(arg1, arg2, arg3), _SDT_ARG(4, arg4) +#define _SDT_ASM_OPERANDS_5(arg1, arg2, arg3, arg4, arg5) \ + _SDT_ASM_OPERANDS_4(arg1, arg2, arg3, arg4), _SDT_ARG(5, arg5) +#define _SDT_ASM_OPERANDS_6(arg1, arg2, arg3, arg4, arg5, arg6) \ + _SDT_ASM_OPERANDS_5(arg1, arg2, arg3, arg4, arg5), _SDT_ARG(6, arg6) +#define _SDT_ASM_OPERANDS_7(arg1, arg2, arg3, arg4, arg5, arg6, arg7) \ + _SDT_ASM_OPERANDS_6(arg1, arg2, arg3, arg4, arg5, arg6), _SDT_ARG(7, arg7) +#define _SDT_ASM_OPERANDS_8(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) \ + _SDT_ASM_OPERANDS_7(arg1, arg2, arg3, arg4, arg5, arg6, arg7), \ + _SDT_ARG(8, arg8) +#define _SDT_ASM_OPERANDS_9(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9) \ + _SDT_ASM_OPERANDS_8(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8), \ + _SDT_ARG(9, arg9) +#define _SDT_ASM_OPERANDS_10(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10) \ + _SDT_ASM_OPERANDS_9(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9), \ + _SDT_ARG(10, arg10) +#define _SDT_ASM_OPERANDS_11(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11) \ + _SDT_ASM_OPERANDS_10(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10), \ + _SDT_ARG(11, arg11) +#define _SDT_ASM_OPERANDS_12(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12) \ + _SDT_ASM_OPERANDS_11(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10, arg11), \ + _SDT_ARG(12, arg12) + +/* These macros can be used in C, C++, or assembly code. + In assembly code the arguments should use normal assembly operand syntax. */ + +#define STAP_PROBE(provider, name) \ + _SDT_PROBE(provider, name, 0, ()) +#define STAP_PROBE1(provider, name, arg1) \ + _SDT_PROBE(provider, name, 1, (arg1)) +#define STAP_PROBE2(provider, name, arg1, arg2) \ + _SDT_PROBE(provider, name, 2, (arg1, arg2)) +#define STAP_PROBE3(provider, name, arg1, arg2, arg3) \ + _SDT_PROBE(provider, name, 3, (arg1, arg2, arg3)) +#define STAP_PROBE4(provider, name, arg1, arg2, arg3, arg4) \ + _SDT_PROBE(provider, name, 4, (arg1, arg2, arg3, arg4)) +#define STAP_PROBE5(provider, name, arg1, arg2, arg3, arg4, arg5) \ + _SDT_PROBE(provider, name, 5, (arg1, arg2, arg3, arg4, arg5)) +#define STAP_PROBE6(provider, name, arg1, arg2, arg3, arg4, arg5, arg6) \ + _SDT_PROBE(provider, name, 6, (arg1, arg2, arg3, arg4, arg5, arg6)) +#define STAP_PROBE7(provider, name, arg1, arg2, arg3, arg4, arg5, arg6, arg7) \ + _SDT_PROBE(provider, name, 7, (arg1, arg2, arg3, arg4, arg5, arg6, arg7)) +#define STAP_PROBE8(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8) \ + _SDT_PROBE(provider, name, 8, (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8)) +#define STAP_PROBE9(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9)\ + _SDT_PROBE(provider, name, 9, (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9)) +#define STAP_PROBE10(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10) \ + _SDT_PROBE(provider, name, 10, \ + (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10)) +#define STAP_PROBE11(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11) \ + _SDT_PROBE(provider, name, 11, \ + (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11)) +#define STAP_PROBE12(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12) \ + _SDT_PROBE(provider, name, 12, \ + (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12)) + +/* This STAP_PROBEV macro can be used in variadic scenarios, where the + number of probe arguments is not known until compile time. Since + variadic macro support may vary with compiler options, you must + pre-#define SDT_USE_VARIADIC to enable this type of probe. + + The trick to count __VA_ARGS__ was inspired by this post by + Laurent Deniau : + http://groups.google.com/group/comp.std.c/msg/346fc464319b1ee5 + + Note that our _SDT_NARG is called with an extra 0 arg that's not + counted, so we don't have to worry about the behavior of macros + called without any arguments. */ + +#define _SDT_NARG(...) __SDT_NARG(__VA_ARGS__, 12,11,10,9,8,7,6,5,4,3,2,1,0) +#define __SDT_NARG(_0,_1,_2,_3,_4,_5,_6,_7,_8,_9,_10,_11,_12, N, ...) N +#ifdef SDT_USE_VARIADIC +#define _SDT_PROBE_N(provider, name, N, ...) \ + _SDT_PROBE(provider, name, N, (__VA_ARGS__)) +#define STAP_PROBEV(provider, name, ...) \ + _SDT_PROBE_N(provider, name, _SDT_NARG(0, ##__VA_ARGS__), ##__VA_ARGS__) +#endif + +/* These macros are for use in asm statements. You must compile + with -std=gnu99 or -std=c99 to use the STAP_PROBE_ASM macro. + + The STAP_PROBE_ASM macro generates a quoted string to be used in the + template portion of the asm statement, concatenated with strings that + contain the actual assembly code around the probe site. + + For example: + + asm ("before\n" + STAP_PROBE_ASM(provider, fooprobe, %eax 4(%esi)) + "after"); + + emits the assembly code for "before\nafter", with a probe in between. + The probe arguments are the %eax register, and the value of the memory + word located 4 bytes past the address in the %esi register. Note that + because this is a simple asm, not a GNU C extended asm statement, these + % characters do not need to be doubled to generate literal %reg names. + + In a GNU C extended asm statement, the probe arguments can be specified + using the macro STAP_PROBE_ASM_TEMPLATE(n) for n arguments. The paired + macro STAP_PROBE_ASM_OPERANDS gives the C values of these probe arguments, + and appears in the input operand list of the asm statement. For example: + + asm ("someinsn %0,%1\n" // %0 is output operand, %1 is input operand + STAP_PROBE_ASM(provider, fooprobe, STAP_PROBE_ASM_TEMPLATE(3)) + "otherinsn %[namedarg]" + : "r" (outvar) + : "g" (some_value), [namedarg] "i" (1234), + STAP_PROBE_ASM_OPERANDS(3, some_value, some_ptr->field, 1234)); + + This is just like writing: + + STAP_PROBE3(provider, fooprobe, some_value, some_ptr->field, 1234)); + + but the probe site is right between "someinsn" and "otherinsn". + + The probe arguments in STAP_PROBE_ASM can be given as assembly + operands instead, even inside a GNU C extended asm statement. + Note that these can use operand templates like %0 or %[name], + and likewise they must write %%reg for a literal operand of %reg. */ + +#define _SDT_ASM_BODY_1(p,n,...) _SDT_ASM_BODY(p,n,_SDT_ASM_SUBSTR,(__VA_ARGS__)) +#define _SDT_ASM_BODY_2(p,n,...) _SDT_ASM_BODY(p,n,/*_SDT_ASM_STRING */,__VA_ARGS__) +#define _SDT_ASM_BODY_N2(p,n,no,...) _SDT_ASM_BODY_ ## no(p,n,__VA_ARGS__) +#define _SDT_ASM_BODY_N1(p,n,no,...) _SDT_ASM_BODY_N2(p,n,no,__VA_ARGS__) +#define _SDT_ASM_BODY_N(p,n,...) _SDT_ASM_BODY_N1(p,n,_SDT_NARG(0, __VA_ARGS__),__VA_ARGS__) + +#if __STDC_VERSION__ >= 199901L +# define STAP_PROBE_ASM(provider, name, ...) \ + _SDT_ASM_BODY_N(provider, name, __VA_ARGS__) \ + _SDT_ASM_BASE +# define STAP_PROBE_ASM_OPERANDS(n, ...) _SDT_ASM_OPERANDS_##n(__VA_ARGS__) +#else +# define STAP_PROBE_ASM(provider, name, args) \ + _SDT_ASM_BODY(provider, name, /* _SDT_ASM_STRING */, (args)) \ + _SDT_ASM_BASE +#endif +#define STAP_PROBE_ASM_TEMPLATE(n) _SDT_ASM_TEMPLATE_##n,"use _SDT_ASM_TEMPLATE_" + + +/* DTrace compatible macro names. */ +#define DTRACE_PROBE(provider,probe) \ + STAP_PROBE(provider,probe) +#define DTRACE_PROBE1(provider,probe,parm1) \ + STAP_PROBE1(provider,probe,parm1) +#define DTRACE_PROBE2(provider,probe,parm1,parm2) \ + STAP_PROBE2(provider,probe,parm1,parm2) +#define DTRACE_PROBE3(provider,probe,parm1,parm2,parm3) \ + STAP_PROBE3(provider,probe,parm1,parm2,parm3) +#define DTRACE_PROBE4(provider,probe,parm1,parm2,parm3,parm4) \ + STAP_PROBE4(provider,probe,parm1,parm2,parm3,parm4) +#define DTRACE_PROBE5(provider,probe,parm1,parm2,parm3,parm4,parm5) \ + STAP_PROBE5(provider,probe,parm1,parm2,parm3,parm4,parm5) +#define DTRACE_PROBE6(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6) \ + STAP_PROBE6(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6) +#define DTRACE_PROBE7(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7) \ + STAP_PROBE7(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7) +#define DTRACE_PROBE8(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8) \ + STAP_PROBE8(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8) +#define DTRACE_PROBE9(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9) \ + STAP_PROBE9(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9) +#define DTRACE_PROBE10(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10) \ + STAP_PROBE10(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10) +#define DTRACE_PROBE11(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11) \ + STAP_PROBE11(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11) +#define DTRACE_PROBE12(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11,parm12) \ + STAP_PROBE12(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11,parm12) + + +#endif /* sys/sdt.h */ -- cgit v1.2.3