From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/bpf/test_xdp_vlan.sh | 233 +++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100755 tools/testing/selftests/bpf/test_xdp_vlan.sh (limited to 'tools/testing/selftests/bpf/test_xdp_vlan.sh') diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh new file mode 100755 index 000000000..fbcaa9f01 --- /dev/null +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -0,0 +1,233 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Author: Jesper Dangaard Brouer + +# Kselftest framework requirement - SKIP code is 4. +readonly KSFT_SKIP=4 +readonly NS1="ns1-$(mktemp -u XXXXXX)" +readonly NS2="ns2-$(mktemp -u XXXXXX)" + +# Allow wrapper scripts to name test +if [ -z "$TESTNAME" ]; then + TESTNAME=xdp_vlan +fi + +# Default XDP mode +XDP_MODE=xdpgeneric + +usage() { + echo "Testing XDP + TC eBPF VLAN manipulations: $TESTNAME" + echo "" + echo "Usage: $0 [-vfh]" + echo " -v | --verbose : Verbose" + echo " --flush : Flush before starting (e.g. after --interactive)" + echo " --interactive : Keep netns setup running after test-run" + echo " --mode=XXX : Choose XDP mode (xdp | xdpgeneric | xdpdrv)" + echo "" +} + +valid_xdp_mode() +{ + local mode=$1 + + case "$mode" in + xdpgeneric | xdpdrv | xdp) + return 0 + ;; + *) + return 1 + esac +} + +cleanup() +{ + local status=$? + + if [ "$status" = "0" ]; then + echo "selftests: $TESTNAME [PASS]"; + else + echo "selftests: $TESTNAME [FAILED]"; + fi + + if [ -n "$INTERACTIVE" ]; then + echo "Namespace setup still active explore with:" + echo " ip netns exec ${NS1} bash" + echo " ip netns exec ${NS2} bash" + exit $status + fi + + set +e + ip link del veth1 2> /dev/null + ip netns del ${NS1} 2> /dev/null + ip netns del ${NS2} 2> /dev/null +} + +# Using external program "getopt" to get --long-options +OPTIONS=$(getopt -o hvfi: \ + --long verbose,flush,help,interactive,debug,mode: -- "$@") +if (( $? != 0 )); then + usage + echo "selftests: $TESTNAME [FAILED] Error calling getopt, unknown option?" + exit 2 +fi +eval set -- "$OPTIONS" + +## --- Parse command line arguments / parameters --- +while true; do + case "$1" in + -v | --verbose) + export VERBOSE=yes + shift + ;; + -i | --interactive | --debug ) + INTERACTIVE=yes + shift + ;; + -f | --flush ) + cleanup + shift + ;; + --mode ) + shift + XDP_MODE=$1 + shift + ;; + -- ) + shift + break + ;; + -h | --help ) + usage; + echo "selftests: $TESTNAME [SKIP] usage help info requested" + exit $KSFT_SKIP + ;; + * ) + shift + break + ;; + esac +done + +if [ "$EUID" -ne 0 ]; then + echo "selftests: $TESTNAME [FAILED] need root privileges" + exit 1 +fi + +valid_xdp_mode $XDP_MODE +if [ $? -ne 0 ]; then + echo "selftests: $TESTNAME [FAILED] unknown XDP mode ($XDP_MODE)" + exit 1 +fi + +ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null +if [ $? -ne 0 ]; then + echo "selftests: $TESTNAME [SKIP] need ip xdp support" + exit $KSFT_SKIP +fi + +# Interactive mode likely require us to cleanup netns +if [ -n "$INTERACTIVE" ]; then + ip link del veth1 2> /dev/null + ip netns del ${NS1} 2> /dev/null + ip netns del ${NS2} 2> /dev/null +fi + +# Exit on failure +set -e + +# Some shell-tools dependencies +which ip > /dev/null +which tc > /dev/null +which ethtool > /dev/null + +# Make rest of shell verbose, showing comments as doc/info +if [ -n "$VERBOSE" ]; then + set -v +fi + +# Create two namespaces +ip netns add ${NS1} +ip netns add ${NS2} + +# Run cleanup if failing or on kill +trap cleanup 0 2 3 6 9 + +# Create veth pair +ip link add veth1 type veth peer name veth2 + +# Move veth1 and veth2 into the respective namespaces +ip link set veth1 netns ${NS1} +ip link set veth2 netns ${NS2} + +# NOTICE: XDP require VLAN header inside packet payload +# - Thus, disable VLAN offloading driver features +# - For veth REMEMBER TX side VLAN-offload +# +# Disable rx-vlan-offload (mostly needed on ns1) +ip netns exec ${NS1} ethtool -K veth1 rxvlan off +ip netns exec ${NS2} ethtool -K veth2 rxvlan off +# +# Disable tx-vlan-offload (mostly needed on ns2) +ip netns exec ${NS2} ethtool -K veth2 txvlan off +ip netns exec ${NS1} ethtool -K veth1 txvlan off + +export IPADDR1=100.64.41.1 +export IPADDR2=100.64.41.2 + +# In ns1/veth1 add IP-addr on plain net_device +ip netns exec ${NS1} ip addr add ${IPADDR1}/24 dev veth1 +ip netns exec ${NS1} ip link set veth1 up + +# In ns2/veth2 create VLAN device +export VLAN=4011 +export DEVNS2=veth2 +ip netns exec ${NS2} ip link add link $DEVNS2 name $DEVNS2.$VLAN type vlan id $VLAN +ip netns exec ${NS2} ip addr add ${IPADDR2}/24 dev $DEVNS2.$VLAN +ip netns exec ${NS2} ip link set $DEVNS2 up +ip netns exec ${NS2} ip link set $DEVNS2.$VLAN up + +# Bringup lo in netns (to avoids confusing people using --interactive) +ip netns exec ${NS1} ip link set lo up +ip netns exec ${NS2} ip link set lo up + +# At this point, the hosts cannot reach each-other, +# because ns2 are using VLAN tags on the packets. + +ip netns exec ${NS2} sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Success: First ping must fail"' + + +# Now we can use the test_xdp_vlan.c program to pop/push these VLAN tags +# ---------------------------------------------------------------------- +# In ns1: ingress use XDP to remove VLAN tags +export DEVNS1=veth1 +export BPF_FILE=test_xdp_vlan.bpf.o + +# First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change" +export XDP_PROG=xdp_vlan_change +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE section $XDP_PROG + +# In ns1: egress use TC to add back VLAN tag 4011 +# (del cmd) +# tc qdisc del dev $DEVNS1 clsact 2> /dev/null +# +ip netns exec ${NS1} tc qdisc add dev $DEVNS1 clsact +ip netns exec ${NS1} tc filter add dev $DEVNS1 egress \ + prio 1 handle 1 bpf da obj $BPF_FILE sec tc_vlan_push + +# Now the namespaces can reach each-other, test with ping: +ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1 +ip netns exec ${NS1} ping -i 0.2 -W 2 -c 2 $IPADDR2 + +# Second test: Replace xdp prog, that fully remove vlan header +# +# Catch kernel bug for generic-XDP, that does didn't allow us to +# remove a VLAN header, because skb->protocol still contain VLAN +# ETH_P_8021Q indication, and this cause overwriting of our changes. +# +export XDP_PROG=xdp_vlan_remove_outer2 +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE off +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE section $XDP_PROG + +# Now the namespaces should still be able reach each-other, test with ping: +ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1 +ip netns exec ${NS1} ping -i 0.2 -W 2 -c 2 $IPADDR2 -- cgit v1.2.3