From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/bpf/test_xsk.sh | 208 ++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100755 tools/testing/selftests/bpf/test_xsk.sh (limited to 'tools/testing/selftests/bpf/test_xsk.sh') diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh new file mode 100755 index 000000000..b077cf58f --- /dev/null +++ b/tools/testing/selftests/bpf/test_xsk.sh @@ -0,0 +1,208 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright(c) 2020 Intel Corporation, Weqaar Janjua + +# AF_XDP selftests based on veth +# +# End-to-end AF_XDP over Veth test +# +# Topology: +# --------- +# ----------- +# _ | Process | _ +# / ----------- \ +# / | \ +# / | \ +# ----------- | ----------- +# | Thread1 | | | Thread2 | +# ----------- | ----------- +# | | | +# ----------- | ----------- +# | xskX | | | xskY | +# ----------- | ----------- +# | | | +# ----------- | ---------- +# | vethX | --------- | vethY | +# ----------- peer ---------- +# +# AF_XDP is an address family optimized for high performance packet processing, +# it is XDP’s user-space interface. +# +# An AF_XDP socket is linked to a single UMEM which is a region of virtual +# contiguous memory, divided into equal-sized frames. +# +# Refer to AF_XDP Kernel Documentation for detailed information: +# https://www.kernel.org/doc/html/latest/networking/af_xdp.html +# +# Prerequisites setup by script: +# +# Set up veth interfaces as per the topology shown ^^: +# * setup two veth interfaces +# ** veth +# ** veth +# *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid +# conflict with any existing interface +# * tests the veth and xsk layers of the topology +# +# See the source xskxceiver.c for information on each test +# +# Kernel configuration: +# --------------------- +# See "config" file for recommended kernel config options. +# +# Turn on XDP sockets and veth support when compiling i.e. +# Networking support --> +# Networking options --> +# [ * ] XDP sockets +# +# Executing Tests: +# ---------------- +# Must run with CAP_NET_ADMIN capability. +# +# Run: +# sudo ./test_xsk.sh +# +# If running from kselftests: +# sudo make run_tests +# +# Run with verbose output: +# sudo ./test_xsk.sh -v +# +# Run and dump packet contents: +# sudo ./test_xsk.sh -D +# +# Set up veth interfaces and leave them up so xskxceiver can be launched in a debugger: +# sudo ./test_xsk.sh -d +# +# Run test suite for physical device in loopback mode +# sudo ./test_xsk.sh -i IFACE + +. xsk_prereqs.sh + +ETH="" + +while getopts "vDi:d" flag +do + case "${flag}" in + v) verbose=1;; + D) dump_pkts=1;; + d) debug=1;; + i) ETH=${OPTARG};; + esac +done + +TEST_NAME="PREREQUISITES" + +URANDOM=/dev/urandom +[ ! -e "${URANDOM}" ] && { echo "${URANDOM} not found. Skipping tests."; test_exit $ksft_fail; } + +VETH0_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4) +VETH0=ve${VETH0_POSTFIX} +VETH1_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4) +VETH1=ve${VETH1_POSTFIX} +MTU=1500 + +trap ctrl_c INT + +function ctrl_c() { + cleanup_exit ${VETH0} ${VETH1} + exit 1 +} + +setup_vethPairs() { + if [[ $verbose -eq 1 ]]; then + echo "setting up ${VETH0}" + fi + ip link add ${VETH0} numtxqueues 4 numrxqueues 4 type veth peer name ${VETH1} numtxqueues 4 numrxqueues 4 + if [ -f /proc/net/if_inet6 ]; then + echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6 + fi + if [[ $verbose -eq 1 ]]; then + echo "setting up ${VETH1}" + fi + + if [[ $busy_poll -eq 1 ]]; then + echo 2 > /sys/class/net/${VETH0}/napi_defer_hard_irqs + echo 200000 > /sys/class/net/${VETH0}/gro_flush_timeout + echo 2 > /sys/class/net/${VETH1}/napi_defer_hard_irqs + echo 200000 > /sys/class/net/${VETH1}/gro_flush_timeout + fi + + ip link set ${VETH1} mtu ${MTU} + ip link set ${VETH0} mtu ${MTU} + ip link set ${VETH1} up + ip link set ${VETH0} up +} + +if [ ! -z $ETH ]; then + VETH0=${ETH} + VETH1=${ETH} +else + validate_root_exec + validate_veth_support ${VETH0} + validate_ip_utility + setup_vethPairs + + retval=$? + if [ $retval -ne 0 ]; then + test_status $retval "${TEST_NAME}" + cleanup_exit ${VETH0} ${VETH1} + exit $retval + fi +fi + + +if [[ $verbose -eq 1 ]]; then + ARGS+="-v " +fi + +if [[ $dump_pkts -eq 1 ]]; then + ARGS="-D " +fi + +retval=$? +test_status $retval "${TEST_NAME}" + +## START TESTS + +statusList=() + +TEST_NAME="XSK_SELFTESTS_${VETH0}_SOFTIRQ" + +if [[ $debug -eq 1 ]]; then + echo "-i" ${VETH0} "-i" ${VETH1} + exit +fi + +exec_xskxceiver + +if [ -z $ETH ]; then + cleanup_exit ${VETH0} ${VETH1} +fi +TEST_NAME="XSK_SELFTESTS_${VETH0}_BUSY_POLL" +busy_poll=1 + +if [ -z $ETH ]; then + setup_vethPairs +fi +exec_xskxceiver + +## END TESTS + +if [ -z $ETH ]; then + cleanup_exit ${VETH0} ${VETH1} +fi + +failures=0 +echo -e "\nSummary:" +for i in "${!statusList[@]}" +do + if [ ${statusList[$i]} -ne 0 ]; then + test_status ${statusList[$i]} ${nameList[$i]} + failures=1 + fi +done + +if [ $failures -eq 0 ]; then + echo "All tests successful!" +fi -- cgit v1.2.3