From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../drivers/net/mlxsw/ingress_rif_conf_vxlan.sh | 311 +++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh (limited to 'tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh') diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh new file mode 100755 index 000000000..90450216a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh @@ -0,0 +1,311 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing after VXLAN decapsulation and verify that the order of +# configuration does not impact switch behavior. Verify that RIF is added +# correctly for existing mapping and that new mapping uses the correct RIF. + +# +---------------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|----------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 br1 | | +# | | vid 10 pvid untagged | | +# | | | | +# | | | | +# | | + vx4001 | | +# | | local 192.0.2.17 | | +# | | remote 192.0.2.18 | | +# | | id 104001 | | +# | | dstport $VXPORT | | +# | | vid 4001 pvid untagged | | +# | | | | +# | +----------------------------------+------------------------------------+ | +# | | | +# | +----------------------------------|------------------------------------+ | +# | | | | | +# | | +-------------------------------+---------------------------------+ | | +# | | | | | | +# | | + vlan10 vlan4001 + | | +# | | 192.0.2.2/28 | | +# | | | | +# | | vrf-green | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 +lo | +# | | 198.51.100.1/24 192.0.2.17/32 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | v$rp2 | +# | + $rp2 | +# | 198.51.100.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vni_fid_map_rif + rif_vni_fid_map +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ + mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + ip link set dev $rp1 up + ip address add dev $rp1 198.51.100.1/24 + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + bridge vlan add vid 10 dev $swp1 pvid untagged + + tc qdisc add dev $swp1 clsact + + ip link add name vx4001 type vxlan id 104001 \ + local 192.0.2.17 dstport $VXPORT \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx4001 up + + ip link set dev vx4001 master br1 + + ip address add 192.0.2.17/32 dev lo + + # Create SVIs. + vrf_create "vrf-green" + ip link set dev vrf-green up + + ip link add link br1 name vlan10 up master vrf-green type vlan id 10 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev vlan10 192.0.2.1 lladdr $(mac_get $h1) + + ip address add 192.0.2.2/28 dev vlan10 + + bridge vlan add vid 10 dev br1 self + bridge vlan add vid 4001 dev br1 self + + sysctl_set net.ipv4.conf.all.rp_filter 0 +} + +switch_destroy() +{ + sysctl_restore net.ipv4.conf.all.rp_filter + + bridge vlan del vid 4001 dev br1 self + bridge vlan del vid 10 dev br1 self + + ip link del dev vlan10 + + vrf_destroy "vrf-green" + + ip address del 192.0.2.17/32 dev lo + + tc qdisc del dev $swp1 clsact + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev vx4001 nomaster + + ip link set dev vx4001 down + ip link del dev vx4001 + + ip address del dev $rp1 198.51.100.1/24 + ip link set dev $rp1 down + + ip link set dev br1 down + ip link del dev br1 +} + +vrp2_create() +{ + simple_if_init $rp2 198.51.100.2/24 + + ip route add 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 +} + +vrp2_destroy() +{ + ip route del 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 + + simple_if_fini $rp2 198.51.100.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + switch_create + + vrp2_create +} + +cleanup() +{ + pre_cleanup + + vrp2_destroy + + switch_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +payload_get() +{ + local dest_mac=$(mac_get vlan4001) + local src_mac=$(mac_get $rp1) + + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"01:96:41:"$( : VXLAN VNI : 104001 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$src_mac:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:54:"$( : IP total length + )"3f:49:"$( : IP identification + )"00:00:"$( : IP flags + frag off + )"3f:"$( : IP TTL + )"01:"$( : IP proto + )"50:21:"$( : IP header csum + )"c6:33:64:0a:"$( : IP saddr: 198.51.100.10 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +vlan_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + + ip link add link br1 name vlan4001 up master vrf-green \ + type vlan id 4001 + + rifs_occ_t1=$(devlink_resource_occ_get rifs) + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" +} + +vlan_rif_del() +{ + ip link del dev vlan4001 +} + +vni_fid_map_rif() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add VNI->FID mapping to the FID of VLAN 4001 + bridge vlan add vid 4001 dev vx4001 pvid untagged + + # Add a RIF to the FID with VNI->FID mapping + vlan_rif_add + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VNI->FID mapping" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +rif_vni_fid_map() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add a RIF to the FID of VLAN 4001 + vlan_rif_add + + # Add VNI->FID mapping to FID with a RIF + bridge vlan add vid 4001 dev vx4001 pvid untagged + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add VNI->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3