From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/drivers/net/mlxsw/tc_sample.sh | 658 +++++++++++++++++++++ 1 file changed, 658 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh (limited to 'tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh') diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh new file mode 100755 index 000000000..83a0210e7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh @@ -0,0 +1,658 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that packets are sampled when tc-sample is used and that reported +# metadata is correct. Two sets of hosts (with and without LAG) are used, since +# metadata extraction in mlxsw is a bit different when LAG is involved. +# +# +---------------------------------+ +---------------------------------+ +# | H1 (vrf) | | H3 (vrf) | +# | + $h1 | | + $h3_lag | +# | | 192.0.2.1/28 | | | 192.0.2.17/28 | +# | | | | | | +# | | default via 192.0.2.2 | | | default via 192.0.2.18 | +# +----|----------------------------+ +----|----------------------------+ +# | | +# +----|-----------------------------------------|----------------------------+ +# | | 192.0.2.2/28 | 192.0.2.18/28 | +# | + $rp1 + $rp3_lag | +# | | +# | + $rp2 + $rp4_lag | +# | | 198.51.100.2/28 | 198.51.100.18/28 | +# +----|-----------------------------------------|----------------------------+ +# | | +# +----|----------------------------+ +----|----------------------------+ +# | | default via 198.51.100.2 | | | default via 198.51.100.18 | +# | | | | | | +# | | 198.51.100.1/28 | | | 198.51.100.17/28 | +# | + $h2 | | + $h4_lag | +# | H2 (vrf) | | H4 (vrf) | +# +---------------------------------+ +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + tc_sample_rate_test + tc_sample_max_rate_test + tc_sample_conflict_test + tc_sample_group_conflict_test + tc_sample_md_iif_test + tc_sample_md_lag_iif_test + tc_sample_md_oif_test + tc_sample_md_lag_oif_test + tc_sample_md_out_tc_test + tc_sample_md_out_tc_occ_test + tc_sample_md_latency_test + tc_sample_acl_group_conflict_test + tc_sample_acl_rate_test + tc_sample_acl_max_rate_test +" +NUM_NETIFS=8 +CAPTURE_FILE=$(mktemp) +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/28 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 +} + +h2_destroy() +{ + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/28 +} + +h3_create() +{ + ip link set dev $h3 down + ip link add name ${h3}_bond type bond mode 802.3ad + ip link set dev $h3 master ${h3}_bond + + simple_if_init ${h3}_bond 192.0.2.17/28 + + ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18 +} + +h3_destroy() +{ + ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18 + + simple_if_fini ${h3}_bond 192.0.2.17/28 + + ip link set dev $h3 nomaster + ip link del dev ${h3}_bond +} + +h4_create() +{ + ip link set dev $h4 down + ip link add name ${h4}_bond type bond mode 802.3ad + ip link set dev $h4 master ${h4}_bond + + simple_if_init ${h4}_bond 198.51.100.17/28 + + ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18 +} + +h4_destroy() +{ + ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18 + + simple_if_fini ${h4}_bond 198.51.100.17/28 + + ip link set dev $h4 nomaster + ip link del dev ${h4}_bond +} + +router_create() +{ + ip link set dev $rp1 up + __addr_add_del $rp1 add 192.0.2.2/28 + tc qdisc add dev $rp1 clsact + + ip link set dev $rp2 up + __addr_add_del $rp2 add 198.51.100.2/28 + tc qdisc add dev $rp2 clsact + + ip link add name ${rp3}_bond type bond mode 802.3ad + ip link set dev $rp3 master ${rp3}_bond + __addr_add_del ${rp3}_bond add 192.0.2.18/28 + tc qdisc add dev $rp3 clsact + ip link set dev ${rp3}_bond up + + ip link add name ${rp4}_bond type bond mode 802.3ad + ip link set dev $rp4 master ${rp4}_bond + __addr_add_del ${rp4}_bond add 198.51.100.18/28 + tc qdisc add dev $rp4 clsact + ip link set dev ${rp4}_bond up +} + +router_destroy() +{ + ip link set dev ${rp4}_bond down + tc qdisc del dev $rp4 clsact + __addr_add_del ${rp4}_bond del 198.51.100.18/28 + ip link set dev $rp4 nomaster + ip link del dev ${rp4}_bond + + ip link set dev ${rp3}_bond down + tc qdisc del dev $rp3 clsact + __addr_add_del ${rp3}_bond del 192.0.2.18/28 + ip link set dev $rp3 nomaster + ip link del dev ${rp3}_bond + + tc qdisc del dev $rp2 clsact + __addr_add_del $rp2 del 198.51.100.2/28 + ip link set dev $rp2 down + + tc qdisc del dev $rp1 clsact + __addr_add_del $rp1 del 192.0.2.2/28 + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + h3=${NETIFS[p5]} + rp3=${NETIFS[p6]} + h4=${NETIFS[p7]} + rp4=${NETIFS[p8]} + + vrf_prepare + + h1_create + h2_create + h3_create + h4_create + router_create +} + +cleanup() +{ + pre_cleanup + + rm -f $CAPTURE_FILE + + router_destroy + h4_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +psample_capture_start() +{ + rm -f $CAPTURE_FILE + + psample &> $CAPTURE_FILE & + + sleep 1 +} + +psample_capture_stop() +{ + { kill %% && wait %%; } 2>/dev/null +} + +__tc_sample_rate_test() +{ + local desc=$1; shift + local dip=$1; shift + local pkts pct + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \ + -B $dip -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 10000) / 10000)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + log_test "tc sample rate ($desc)" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_rate_test() +{ + __tc_sample_rate_test "forward" 198.51.100.1 + __tc_sample_rate_test "local receive" 192.0.2.2 +} + +tc_sample_max_rate_test() +{ + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8 + 1)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample maximum rate" +} + +tc_sample_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port, + # even when they share the same parameters. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 &> /dev/null + check_fail $? "Managed to configure second sampling rule" + + # Delete the first rule and make sure the second rule can now be + # configured. + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule after deletion" + + log_test "tc sample conflict test" + + tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall +} + +tc_sample_group_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port + # with different groups. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample group conflict test" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_iif_test() +{ + local rp1_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample iif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_iif_test() +{ + local rp3_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample lag iif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_oif_test() +{ + local rp2_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample oif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_oif_test() +{ + local rp4_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample lag oif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_test() +{ + RET=0 + + # Output traffic class is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + # By default, all the packets should go to the same traffic class (0). + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 0 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (0)" + + # Map all priorities to highest traffic class (7) and check reported + # out-tc. + tc qdisc replace dev $rp2 root handle 1: \ + prio bands 3 priomap 0 0 0 0 0 0 0 0 + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 7 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (7)" + + log_test "tc sample out-tc" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_occ_test() +{ + local backlog pct occ + + RET=0 + + # Output traffic class occupancy is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + # Configure a shaper on egress to create congestion. + tc qdisc replace dev $rp2 root handle 1: \ + tbf rate 1Mbit burst 256k limit 1M + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q & + + # Allow congestion to reach steady state. + sleep 10 + + backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]') + + # Kill mausezahn. + { kill %% && wait %%; } 2>/dev/null + + psample_capture_stop + + # Record last congestion sample. + occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \ + cut -d ' ' -f 16) + + pct=$((100 * (occ - backlog) / backlog)) + (( -1 <= pct && pct <= 1)) + check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%" + + log_test "tc sample out-tc-occ" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_latency_test() +{ + RET=0 + + # Egress sampling not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets do not have latency attribute" + + log_test "tc sample latency" + + tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall +} + +tc_sample_acl_group_conflict_test() +{ + RET=0 + + # Test that two flower sampling rules cannot be configured on the same + # port with different groups. + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule with same group" + + tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample (w/ flower) group conflict test" + + tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower +} + +__tc_sample_acl_rate_test() +{ + local bind=$1; shift + local port=$1; shift + local pkts pct + + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 10000) / 10000)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + # Setup a filter that should not match any packet and make sure packets + # are not sampled. + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "group 1 " $CAPTURE_FILE + check_fail $? "Sampled packets when should not" + + log_test "tc sample (w/ flower) rate ($bind)" + + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower +} + +tc_sample_acl_rate_test() +{ + __tc_sample_acl_rate_test ingress $rp1 + __tc_sample_acl_rate_test egress $rp2 +} + +tc_sample_acl_max_rate_test() +{ + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24 - 1)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample (w/ flower) maximum rate" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3