From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../drivers/net/netdevsim/devlink_trap.sh | 514 +++++++++++++++++++++ 1 file changed, 514 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh (limited to 'tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh') diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh new file mode 100755 index 000000000..b64d98ca0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh @@ -0,0 +1,514 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking devlink-trap functionality. It makes use of +# netdevsim which implements the required callbacks. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + init_test + trap_action_test + trap_metadata_test + bad_trap_test + bad_trap_action_test + trap_stats_test + trap_group_action_test + bad_trap_group_test + trap_group_stats_test + trap_policer_test + trap_policer_bind_test + port_del_test + dev_del_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +SLEEP_TIME=1 +NETDEV="" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +require_command udevadm + +modprobe netdevsim &> /dev/null +if [ ! -d "$NETDEVSIM_PATH" ]; then + echo "SKIP: No netdevsim support" + exit 1 +fi + +if [ -d "${NETDEVSIM_PATH}/devices/netdevsim${DEV_ADDR}" ]; then + echo "SKIP: Device netdevsim${DEV_ADDR} already exists" + exit 1 +fi + +check_netdev_down() +{ + state=$(cat /sys/class/net/${NETDEV}/flags) + + if [ $((state & 1)) -ne 0 ]; then + echo "WARNING: unexpected interface UP, disable NetworkManager?" + + ip link set dev $NETDEV down + fi +} + +init_test() +{ + RET=0 + + test $(devlink_traps_num_get) -ne 0 + check_err $? "No traps were registered" + + log_test "Initialization" +} + +trap_action_test() +{ + local orig_action + local trap_name + local action + + RET=0 + + for trap_name in $(devlink_traps_get); do + # The action of non-drop traps cannot be changed. + if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then + devlink_trap_action_set $trap_name "trap" + action=$(devlink_trap_action_get $trap_name) + if [ $action != "trap" ]; then + check_err 1 "Trap $trap_name did not change action to trap" + fi + + devlink_trap_action_set $trap_name "drop" + action=$(devlink_trap_action_get $trap_name) + if [ $action != "drop" ]; then + check_err 1 "Trap $trap_name did not change action to drop" + fi + else + orig_action=$(devlink_trap_action_get $trap_name) + + devlink_trap_action_set $trap_name "trap" + action=$(devlink_trap_action_get $trap_name) + if [ $action != $orig_action ]; then + check_err 1 "Trap $trap_name changed action when should not" + fi + + devlink_trap_action_set $trap_name "drop" + action=$(devlink_trap_action_get $trap_name) + if [ $action != $orig_action ]; then + check_err 1 "Trap $trap_name changed action when should not" + fi + fi + done + + log_test "Trap action" +} + +trap_metadata_test() +{ + local trap_name + + RET=0 + + for trap_name in $(devlink_traps_get); do + devlink_trap_metadata_test $trap_name "input_port" + check_err $? "Input port not reported as metadata of trap $trap_name" + if [ $trap_name == "ingress_flow_action_drop" ] || + [ $trap_name == "egress_flow_action_drop" ]; then + devlink_trap_metadata_test $trap_name "flow_action_cookie" + check_err $? "Flow action cookie not reported as metadata of trap $trap_name" + fi + done + + log_test "Trap metadata" +} + +bad_trap_test() +{ + RET=0 + + devlink_trap_action_set "made_up_trap" "drop" + check_fail $? "Did not get an error for non-existing trap" + + log_test "Non-existing trap" +} + +bad_trap_action_test() +{ + local traps_arr + local trap_name + + RET=0 + + # Pick first trap. + traps_arr=($(devlink_traps_get)) + trap_name=${traps_arr[0]} + + devlink_trap_action_set $trap_name "made_up_action" + check_fail $? "Did not get an error for non-existing trap action" + + log_test "Non-existing trap action" +} + +trap_stats_test() +{ + local trap_name + + RET=0 + + check_netdev_down + for trap_name in $(devlink_traps_get); do + devlink_trap_stats_idle_test $trap_name + check_err $? "Stats of trap $trap_name not idle when netdev down" + + ip link set dev $NETDEV up + + if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then + devlink_trap_action_set $trap_name "trap" + devlink_trap_stats_idle_test $trap_name + check_fail $? "Stats of trap $trap_name idle when action is trap" + + devlink_trap_action_set $trap_name "drop" + devlink_trap_stats_idle_test $trap_name + check_err $? "Stats of trap $trap_name not idle when action is drop" + + echo "y"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_fail $? "Managed to read trap (hard dropped) statistics when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_err $? "Did not manage to read trap (hard dropped) statistics when should" + + devlink_trap_drop_stats_idle_test $trap_name + check_fail $? "Drop stats of trap $trap_name idle when should not" + else + devlink_trap_stats_idle_test $trap_name + check_fail $? "Stats of non-drop trap $trap_name idle when should not" + fi + + ip link set dev $NETDEV down + done + + log_test "Trap statistics" +} + +trap_group_action_test() +{ + local curr_group group_name + local trap_name + local trap_type + local action + + RET=0 + + for group_name in $(devlink_trap_groups_get); do + devlink_trap_group_action_set $group_name "trap" + + for trap_name in $(devlink_traps_get); do + curr_group=$(devlink_trap_group_get $trap_name) + if [ $curr_group != $group_name ]; then + continue + fi + + trap_type=$(devlink_trap_type_get $trap_name) + if [ $trap_type != "drop" ]; then + continue + fi + + action=$(devlink_trap_action_get $trap_name) + if [ $action != "trap" ]; then + check_err 1 "Trap $trap_name did not change action to trap" + fi + done + + devlink_trap_group_action_set $group_name "drop" + + for trap_name in $(devlink_traps_get); do + curr_group=$(devlink_trap_group_get $trap_name) + if [ $curr_group != $group_name ]; then + continue + fi + + trap_type=$(devlink_trap_type_get $trap_name) + if [ $trap_type != "drop" ]; then + continue + fi + + action=$(devlink_trap_action_get $trap_name) + if [ $action != "drop" ]; then + check_err 1 "Trap $trap_name did not change action to drop" + fi + done + done + + log_test "Trap group action" +} + +bad_trap_group_test() +{ + RET=0 + + devlink_trap_group_action_set "made_up_trap_group" "drop" + check_fail $? "Did not get an error for non-existing trap group" + + log_test "Non-existing trap group" +} + +trap_group_stats_test() +{ + local group_name + + RET=0 + + check_netdev_down + for group_name in $(devlink_trap_groups_get); do + devlink_trap_group_stats_idle_test $group_name + check_err $? "Stats of trap group $group_name not idle when netdev down" + + ip link set dev $NETDEV up + + devlink_trap_group_action_set $group_name "trap" + devlink_trap_group_stats_idle_test $group_name + check_fail $? "Stats of trap group $group_name idle when action is trap" + + devlink_trap_group_action_set $group_name "drop" + ip link set dev $NETDEV down + done + + log_test "Trap group statistics" +} + +trap_policer_test() +{ + local packets_t0 + local packets_t1 + + RET=0 + + if [ $(devlink_trap_policers_num_get) -eq 0 ]; then + check_err 1 "Failed to dump policers" + fi + + devlink trap policer set $DEVLINK_DEV policer 1337 &> /dev/null + check_fail $? "Did not get an error for setting a non-existing policer" + devlink trap policer show $DEVLINK_DEV policer 1337 &> /dev/null + check_fail $? "Did not get an error for getting a non-existing policer" + + devlink trap policer set $DEVLINK_DEV policer 1 rate 2000 burst 16 + check_err $? "Failed to set valid parameters for a valid policer" + if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then + check_err 1 "Policer rate was not changed" + fi + if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then + check_err 1 "Policer burst size was not changed" + fi + + devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null + check_fail $? "Policer rate was changed to rate lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 rate 9000 &> /dev/null + check_fail $? "Policer rate was changed to rate higher than limit" + devlink trap policer set $DEVLINK_DEV policer 1 burst 2 &> /dev/null + check_fail $? "Policer burst size was changed to burst size lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 rate 65537 &> /dev/null + check_fail $? "Policer burst size was changed to burst size higher than limit" + echo "y" > $DEBUGFS_DIR/fail_trap_policer_set + devlink trap policer set $DEVLINK_DEV policer 1 rate 3000 &> /dev/null + check_fail $? "Managed to set policer rate when should not" + echo "n" > $DEBUGFS_DIR/fail_trap_policer_set + if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then + check_err 1 "Policer rate was changed to an invalid value" + fi + if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then + check_err 1 "Policer burst size was changed to an invalid value" + fi + + packets_t0=$(devlink_trap_policer_rx_dropped_get 1) + sleep .5 + packets_t1=$(devlink_trap_policer_rx_dropped_get 1) + if [ ! $packets_t1 -gt $packets_t0 ]; then + check_err 1 "Policer drop counter was not incremented" + fi + + echo "y"> $DEBUGFS_DIR/fail_trap_policer_counter_get + devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null + check_fail $? "Managed to read policer drop counter when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_policer_counter_get + devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null + check_err $? "Did not manage to read policer drop counter when should" + + log_test "Trap policer" +} + +trap_group_check_policer() +{ + local group_name=$1; shift + + devlink -j -p trap group show $DEVLINK_DEV group $group_name \ + | jq -e '.[][][]["policer"]' &> /dev/null +} + +trap_policer_bind_test() +{ + RET=0 + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then + check_err 1 "Bound policer was not changed" + fi + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1337 \ + &> /dev/null + check_fail $? "Did not get an error for binding a non-existing policer" + if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then + check_err 1 "Bound policer was changed when should not" + fi + + devlink trap group set $DEVLINK_DEV group l2_drops policer 0 + check_err $? "Failed to unbind a policer when using ID 0" + trap_group_check_policer "l2_drops" + check_fail $? "Trap group has a policer after unbinding with ID 0" + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + + devlink trap group set $DEVLINK_DEV group l2_drops nopolicer + check_err $? "Failed to unbind a policer when using 'nopolicer' keyword" + trap_group_check_policer "l2_drops" + check_fail $? "Trap group has a policer after unbinding with 'nopolicer' keyword" + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + + echo "y"> $DEBUGFS_DIR/fail_trap_group_set + devlink trap group set $DEVLINK_DEV group l2_drops policer 2 \ + &> /dev/null + check_fail $? "Managed to bind a policer when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_group_set + devlink trap group set $DEVLINK_DEV group l2_drops policer 2 + check_err $? "Did not manage to bind a policer when should" + + devlink trap group set $DEVLINK_DEV group l2_drops action drop \ + policer 1337 &> /dev/null + check_fail $? "Did not get an error for partially modified trap group" + + log_test "Trap policer binding" +} + +port_del_test() +{ + local group_name + local i + + # The test never fails. It is meant to exercise different code paths + # and make sure we properly dismantle a port while packets are + # in-flight. + RET=0 + + devlink_traps_enable_all + + for i in $(seq 1 10); do + ip link set dev $NETDEV up + + sleep $SLEEP_TIME + + netdevsim_port_destroy + netdevsim_port_create + udevadm settle + done + + devlink_traps_disable_all + + log_test "Port delete" +} + +dev_del_test() +{ + local group_name + local i + + # The test never fails. It is meant to exercise different code paths + # and make sure we properly unregister traps while packets are + # in-flight. + RET=0 + + devlink_traps_enable_all + + for i in $(seq 1 10); do + ip link set dev $NETDEV up + + sleep $SLEEP_TIME + + cleanup + setup_prepare + done + + devlink_traps_disable_all + + log_test "Device delete" +} + +netdevsim_dev_create() +{ + echo "$DEV_ADDR 0" > ${NETDEVSIM_PATH}/new_device +} + +netdevsim_dev_destroy() +{ + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device +} + +netdevsim_port_create() +{ + echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/new_port +} + +netdevsim_port_destroy() +{ + echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/del_port +} + +setup_prepare() +{ + local netdev + + netdevsim_dev_create + + if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}" ]; then + echo "Failed to create netdevsim device" + exit 1 + fi + + netdevsim_port_create + + if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}/net/" ]; then + echo "Failed to create netdevsim port" + exit 1 + fi + + # Wait for udev to rename newly created netdev. + udevadm settle + + NETDEV=$(ls ${NETDEVSIM_PATH}/devices/${DEV}/net/) +} + +cleanup() +{ + pre_cleanup + netdevsim_port_destroy + netdevsim_dev_destroy +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3