From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../futex/functional/futex_wait_timeout.c | 199 +++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100644 tools/testing/selftests/futex/functional/futex_wait_timeout.c (limited to 'tools/testing/selftests/futex/functional/futex_wait_timeout.c') diff --git a/tools/testing/selftests/futex/functional/futex_wait_timeout.c b/tools/testing/selftests/futex/functional/futex_wait_timeout.c new file mode 100644 index 000000000..3651ce17b --- /dev/null +++ b/tools/testing/selftests/futex/functional/futex_wait_timeout.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/****************************************************************************** + * + * Copyright © International Business Machines Corp., 2009 + * + * DESCRIPTION + * Block on a futex and wait for timeout. + * + * AUTHOR + * Darren Hart + * + * HISTORY + * 2009-Nov-6: Initial version by Darren Hart + * 2021-Apr-26: More test cases by André Almeida + * + *****************************************************************************/ + +#include +#include "futextest.h" +#include "futex2test.h" +#include "logging.h" + +#define TEST_NAME "futex-wait-timeout" + +static long timeout_ns = 100000; /* 100us default timeout */ +static futex_t futex_pi; + +void usage(char *prog) +{ + printf("Usage: %s\n", prog); + printf(" -c Use color\n"); + printf(" -h Display this help message\n"); + printf(" -t N Timeout in nanoseconds (default: 100,000)\n"); + printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", + VQUIET, VCRITICAL, VINFO); +} + +/* + * Get a PI lock and hold it forever, so the main thread lock_pi will block + * and we can test the timeout + */ +void *get_pi_lock(void *arg) +{ + int ret; + volatile futex_t lock = 0; + + ret = futex_lock_pi(&futex_pi, NULL, 0, 0); + if (ret != 0) + error("futex_lock_pi failed\n", ret); + + /* Blocks forever */ + ret = futex_wait(&lock, 0, NULL, 0); + error("futex_wait failed\n", ret); + + return NULL; +} + +/* + * Check if the function returned the expected error + */ +static void test_timeout(int res, int *ret, char *test_name, int err) +{ + if (!res || errno != err) { + ksft_test_result_fail("%s returned %d\n", test_name, + res < 0 ? errno : res); + *ret = RET_FAIL; + } else { + ksft_test_result_pass("%s succeeds\n", test_name); + } +} + +/* + * Calculate absolute timeout and correct overflow + */ +static int futex_get_abs_timeout(clockid_t clockid, struct timespec *to, + long timeout_ns) +{ + if (clock_gettime(clockid, to)) { + error("clock_gettime failed\n", errno); + return errno; + } + + to->tv_nsec += timeout_ns; + + if (to->tv_nsec >= 1000000000) { + to->tv_sec++; + to->tv_nsec -= 1000000000; + } + + return 0; +} + +int main(int argc, char *argv[]) +{ + futex_t f1 = FUTEX_INITIALIZER; + int res, ret = RET_PASS; + struct timespec to; + pthread_t thread; + int c; + struct futex_waitv waitv = { + .uaddr = (uintptr_t)&f1, + .val = f1, + .flags = FUTEX_32, + .__reserved = 0 + }; + + while ((c = getopt(argc, argv, "cht:v:")) != -1) { + switch (c) { + case 'c': + log_color(1); + break; + case 'h': + usage(basename(argv[0])); + exit(0); + case 't': + timeout_ns = atoi(optarg); + break; + case 'v': + log_verbosity(atoi(optarg)); + break; + default: + usage(basename(argv[0])); + exit(1); + } + } + + ksft_print_header(); + ksft_set_plan(9); + ksft_print_msg("%s: Block on a futex and wait for timeout\n", + basename(argv[0])); + ksft_print_msg("\tArguments: timeout=%ldns\n", timeout_ns); + + pthread_create(&thread, NULL, get_pi_lock, NULL); + + /* initialize relative timeout */ + to.tv_sec = 0; + to.tv_nsec = timeout_ns; + + res = futex_wait(&f1, f1, &to, 0); + test_timeout(res, &ret, "futex_wait relative", ETIMEDOUT); + + /* FUTEX_WAIT_BITSET with CLOCK_REALTIME */ + if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) + return RET_FAIL; + res = futex_wait_bitset(&f1, f1, &to, 1, FUTEX_CLOCK_REALTIME); + test_timeout(res, &ret, "futex_wait_bitset realtime", ETIMEDOUT); + + /* FUTEX_WAIT_BITSET with CLOCK_MONOTONIC */ + if (futex_get_abs_timeout(CLOCK_MONOTONIC, &to, timeout_ns)) + return RET_FAIL; + res = futex_wait_bitset(&f1, f1, &to, 1, 0); + test_timeout(res, &ret, "futex_wait_bitset monotonic", ETIMEDOUT); + + /* FUTEX_WAIT_REQUEUE_PI with CLOCK_REALTIME */ + if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) + return RET_FAIL; + res = futex_wait_requeue_pi(&f1, f1, &futex_pi, &to, FUTEX_CLOCK_REALTIME); + test_timeout(res, &ret, "futex_wait_requeue_pi realtime", ETIMEDOUT); + + /* FUTEX_WAIT_REQUEUE_PI with CLOCK_MONOTONIC */ + if (futex_get_abs_timeout(CLOCK_MONOTONIC, &to, timeout_ns)) + return RET_FAIL; + res = futex_wait_requeue_pi(&f1, f1, &futex_pi, &to, 0); + test_timeout(res, &ret, "futex_wait_requeue_pi monotonic", ETIMEDOUT); + + /* + * FUTEX_LOCK_PI with CLOCK_REALTIME + * Due to historical reasons, FUTEX_LOCK_PI supports only realtime + * clock, but requires the caller to not set CLOCK_REALTIME flag. + * + * If you call FUTEX_LOCK_PI with a monotonic clock, it'll be + * interpreted as a realtime clock, and (unless you mess your machine's + * time or your time machine) the monotonic clock value is always + * smaller than realtime and the syscall will timeout immediately. + */ + if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) + return RET_FAIL; + res = futex_lock_pi(&futex_pi, &to, 0, 0); + test_timeout(res, &ret, "futex_lock_pi realtime", ETIMEDOUT); + + /* Test operations that don't support FUTEX_CLOCK_REALTIME */ + res = futex_lock_pi(&futex_pi, NULL, 0, FUTEX_CLOCK_REALTIME); + test_timeout(res, &ret, "futex_lock_pi invalid timeout flag", ENOSYS); + + /* futex_waitv with CLOCK_MONOTONIC */ + if (futex_get_abs_timeout(CLOCK_MONOTONIC, &to, timeout_ns)) + return RET_FAIL; + res = futex_waitv(&waitv, 1, 0, &to, CLOCK_MONOTONIC); + test_timeout(res, &ret, "futex_waitv monotonic", ETIMEDOUT); + + /* futex_waitv with CLOCK_REALTIME */ + if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) + return RET_FAIL; + res = futex_waitv(&waitv, 1, 0, &to, CLOCK_REALTIME); + test_timeout(res, &ret, "futex_waitv realtime", ETIMEDOUT); + + ksft_print_cnts(); + return ret; +} -- cgit v1.2.3