From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/kselftest/module.sh | 84 ++++++++++++++++ tools/testing/selftests/kselftest/prefix.pl | 24 +++++ tools/testing/selftests/kselftest/runner.sh | 147 ++++++++++++++++++++++++++++ 3 files changed, 255 insertions(+) create mode 100755 tools/testing/selftests/kselftest/module.sh create mode 100755 tools/testing/selftests/kselftest/prefix.pl create mode 100644 tools/testing/selftests/kselftest/runner.sh (limited to 'tools/testing/selftests/kselftest') diff --git a/tools/testing/selftests/kselftest/module.sh b/tools/testing/selftests/kselftest/module.sh new file mode 100755 index 000000000..fb4733faf --- /dev/null +++ b/tools/testing/selftests/kselftest/module.sh @@ -0,0 +1,84 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ + +# +# Runs an individual test module. +# +# kselftest expects a separate executable for each test, this can be +# created by adding a script like this: +# +# #!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +# $(dirname $0)/../kselftest/module.sh "description" module_name +# +# Example: tools/testing/selftests/lib/printf.sh + +desc="" # Output prefix. +module="" # Filename (without the .ko). +args="" # modprobe arguments. + +modprobe="/sbin/modprobe" + +main() { + parse_args "$@" + assert_root + assert_have_module + run_module +} + +parse_args() { + script=${0##*/} + + if [ $# -lt 2 ]; then + echo "Usage: $script [FAIL]" + exit 1 + fi + + desc="$1" + shift || true + module="$1" + shift || true + args="$@" +} + +assert_root() { + if [ ! -w /dev ]; then + skip "please run as root" + fi +} + +assert_have_module() { + if ! $modprobe -q -n $module; then + skip "module $module is not found" + fi +} + +run_module() { + if $modprobe -q $module $args; then + $modprobe -q -r $module + say "ok" + else + fail "" + fi +} + +say() { + echo "$desc: $1" +} + + +fail() { + say "$1 [FAIL]" >&2 + exit 1 +} + +skip() { + say "$1 [SKIP]" >&2 + # Kselftest framework requirement - SKIP code is 4. + exit 4 +} + +# +# Main script +# +main "$@" diff --git a/tools/testing/selftests/kselftest/prefix.pl b/tools/testing/selftests/kselftest/prefix.pl new file mode 100755 index 000000000..12a7f4ca2 --- /dev/null +++ b/tools/testing/selftests/kselftest/prefix.pl @@ -0,0 +1,24 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 +# Prefix all lines with "# ", unbuffered. Command being piped in may need +# to have unbuffering forced with "stdbuf -i0 -o0 -e0 $cmd". +use strict; +use IO::Handle; + +binmode STDIN; +binmode STDOUT; + +STDOUT->autoflush(1); + +my $needed = 1; +while (1) { + my $char; + my $bytes = sysread(STDIN, $char, 1); + exit 0 if ($bytes == 0); + if ($needed) { + print "# "; + $needed = 0; + } + print $char; + $needed = 1 if ($char eq "\n"); +} diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh new file mode 100644 index 000000000..294619ade --- /dev/null +++ b/tools/testing/selftests/kselftest/runner.sh @@ -0,0 +1,147 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Runs a set of tests in a given subdirectory. +export skip_rc=4 +export timeout_rc=124 +export logfile=/dev/stdout +export per_test_logging= + +# Defaults for "settings" file fields: +# "timeout" how many seconds to let each test run before failing. +export kselftest_default_timeout=45 + +# There isn't a shell-agnostic way to find the path of a sourced file, +# so we must rely on BASE_DIR being set to find other tools. +if [ -z "$BASE_DIR" ]; then + echo "Error: BASE_DIR must be set before sourcing." >&2 + exit 1 +fi + +TR_CMD=$(command -v tr) + +# If Perl is unavailable, we must fall back to line-at-a-time prefixing +# with sed instead of unbuffered output. +tap_prefix() +{ + if [ ! -x /usr/bin/perl ]; then + sed -e 's/^/# /' + else + "$BASE_DIR"/kselftest/prefix.pl + fi +} + +tap_timeout() +{ + # Make sure tests will time out if utility is available. + if [ -x /usr/bin/timeout ] ; then + /usr/bin/timeout --foreground "$kselftest_timeout" $1 + else + $1 + fi +} + +run_one() +{ + DIR="$1" + TEST="$2" + NUM="$3" + + BASENAME_TEST=$(basename $TEST) + + # Reset any "settings"-file variables. + export kselftest_timeout="$kselftest_default_timeout" + + # Safe default if tr not available + kselftest_cmd_args_ref="KSELFTEST_ARGS" + + # Optional arguments for this command, possibly defined as an + # environment variable built using the test executable in all + # uppercase and sanitized substituting non acceptable shell + # variable name characters with "_" as in: + # + # KSELFTEST__ARGS="" + # + # e.g. + # + # rtctest --> KSELFTEST_RTCTEST_ARGS="/dev/rtc1" + # + # cpu-on-off-test.sh --> KSELFTEST_CPU_ON_OFF_TEST_SH_ARGS="-a -p 10" + # + if [ -n "$TR_CMD" ]; then + BASENAME_SANITIZED=$(echo "$BASENAME_TEST" | \ + $TR_CMD -d "[:blank:][:cntrl:]" | \ + $TR_CMD -c "[:alnum:]_" "_" | \ + $TR_CMD [:lower:] [:upper:]) + kselftest_cmd_args_ref="KSELFTEST_${BASENAME_SANITIZED}_ARGS" + fi + + # Load per-test-directory kselftest "settings" file. + settings="$BASE_DIR/$DIR/settings" + if [ -r "$settings" ] ; then + while read line ; do + # Skip comments. + if echo "$line" | grep -q '^#'; then + continue + fi + field=$(echo "$line" | cut -d= -f1) + value=$(echo "$line" | cut -d= -f2-) + eval "kselftest_$field"="$value" + done < "$settings" + fi + + TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" + echo "# $TEST_HDR_MSG" + if [ ! -e "$TEST" ]; then + echo "# Warning: file $TEST is missing!" + echo "not ok $test_num $TEST_HDR_MSG" + else + eval kselftest_cmd_args="\$${kselftest_cmd_args_ref:-}" + cmd="./$BASENAME_TEST $kselftest_cmd_args" + if [ ! -x "$TEST" ]; then + echo "# Warning: file $TEST is not executable" + + if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ] + then + interpreter=$(head -n 1 "$TEST" | cut -c 3-) + cmd="$interpreter ./$BASENAME_TEST" + else + echo "not ok $test_num $TEST_HDR_MSG" + return + fi + fi + cd `dirname $TEST` > /dev/null + ((((( tap_timeout "$cmd" 2>&1; echo $? >&3) | + tap_prefix >&4) 3>&1) | + (read xs; exit $xs)) 4>>"$logfile" && + echo "ok $test_num $TEST_HDR_MSG") || + (rc=$?; \ + if [ $rc -eq $skip_rc ]; then \ + echo "ok $test_num $TEST_HDR_MSG # SKIP" + elif [ $rc -eq $timeout_rc ]; then \ + echo "#" + echo "not ok $test_num $TEST_HDR_MSG # TIMEOUT $kselftest_timeout seconds" + else + echo "not ok $test_num $TEST_HDR_MSG # exit=$rc" + fi) + cd - >/dev/null + fi +} + +run_many() +{ + echo "TAP version 13" + DIR="${PWD#${BASE_DIR}/}" + test_num=0 + total=$(echo "$@" | wc -w) + echo "1..$total" + for TEST in "$@"; do + BASENAME_TEST=$(basename $TEST) + test_num=$(( test_num + 1 )) + if [ -n "$per_test_logging" ]; then + logfile="/tmp/$BASENAME_TEST" + cat /dev/null > "$logfile" + fi + run_one "$DIR" "$TEST" "$test_num" + done +} -- cgit v1.2.3