From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/kvm/lib/x86_64/svm.c | 164 +++++++++++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 tools/testing/selftests/kvm/lib/x86_64/svm.c (limited to 'tools/testing/selftests/kvm/lib/x86_64/svm.c') diff --git a/tools/testing/selftests/kvm/lib/x86_64/svm.c b/tools/testing/selftests/kvm/lib/x86_64/svm.c new file mode 100644 index 000000000..5495a92df --- /dev/null +++ b/tools/testing/selftests/kvm/lib/x86_64/svm.c @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * tools/testing/selftests/kvm/lib/x86_64/svm.c + * Helpers used for nested SVM testing + * Largely inspired from KVM unit test svm.c + * + * Copyright (C) 2020, Red Hat, Inc. + */ + +#include "test_util.h" +#include "kvm_util.h" +#include "processor.h" +#include "svm_util.h" + +#define SEV_DEV_PATH "/dev/sev" + +struct gpr64_regs guest_regs; +u64 rflags; + +/* Allocate memory regions for nested SVM tests. + * + * Input Args: + * vm - The VM to allocate guest-virtual addresses in. + * + * Output Args: + * p_svm_gva - The guest virtual address for the struct svm_test_data. + * + * Return: + * Pointer to structure with the addresses of the SVM areas. + */ +struct svm_test_data * +vcpu_alloc_svm(struct kvm_vm *vm, vm_vaddr_t *p_svm_gva) +{ + vm_vaddr_t svm_gva = vm_vaddr_alloc_page(vm); + struct svm_test_data *svm = addr_gva2hva(vm, svm_gva); + + svm->vmcb = (void *)vm_vaddr_alloc_page(vm); + svm->vmcb_hva = addr_gva2hva(vm, (uintptr_t)svm->vmcb); + svm->vmcb_gpa = addr_gva2gpa(vm, (uintptr_t)svm->vmcb); + + svm->save_area = (void *)vm_vaddr_alloc_page(vm); + svm->save_area_hva = addr_gva2hva(vm, (uintptr_t)svm->save_area); + svm->save_area_gpa = addr_gva2gpa(vm, (uintptr_t)svm->save_area); + + svm->msr = (void *)vm_vaddr_alloc_page(vm); + svm->msr_hva = addr_gva2hva(vm, (uintptr_t)svm->msr); + svm->msr_gpa = addr_gva2gpa(vm, (uintptr_t)svm->msr); + memset(svm->msr_hva, 0, getpagesize()); + + *p_svm_gva = svm_gva; + return svm; +} + +static void vmcb_set_seg(struct vmcb_seg *seg, u16 selector, + u64 base, u32 limit, u32 attr) +{ + seg->selector = selector; + seg->attrib = attr; + seg->limit = limit; + seg->base = base; +} + +void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_rsp) +{ + struct vmcb *vmcb = svm->vmcb; + uint64_t vmcb_gpa = svm->vmcb_gpa; + struct vmcb_save_area *save = &vmcb->save; + struct vmcb_control_area *ctrl = &vmcb->control; + u32 data_seg_attr = 3 | SVM_SELECTOR_S_MASK | SVM_SELECTOR_P_MASK + | SVM_SELECTOR_DB_MASK | SVM_SELECTOR_G_MASK; + u32 code_seg_attr = 9 | SVM_SELECTOR_S_MASK | SVM_SELECTOR_P_MASK + | SVM_SELECTOR_L_MASK | SVM_SELECTOR_G_MASK; + uint64_t efer; + + efer = rdmsr(MSR_EFER); + wrmsr(MSR_EFER, efer | EFER_SVME); + wrmsr(MSR_VM_HSAVE_PA, svm->save_area_gpa); + + memset(vmcb, 0, sizeof(*vmcb)); + asm volatile ("vmsave %0\n\t" : : "a" (vmcb_gpa) : "memory"); + vmcb_set_seg(&save->es, get_es(), 0, -1U, data_seg_attr); + vmcb_set_seg(&save->cs, get_cs(), 0, -1U, code_seg_attr); + vmcb_set_seg(&save->ss, get_ss(), 0, -1U, data_seg_attr); + vmcb_set_seg(&save->ds, get_ds(), 0, -1U, data_seg_attr); + vmcb_set_seg(&save->gdtr, 0, get_gdt().address, get_gdt().size, 0); + vmcb_set_seg(&save->idtr, 0, get_idt().address, get_idt().size, 0); + + ctrl->asid = 1; + save->cpl = 0; + save->efer = rdmsr(MSR_EFER); + asm volatile ("mov %%cr4, %0" : "=r"(save->cr4) : : "memory"); + asm volatile ("mov %%cr3, %0" : "=r"(save->cr3) : : "memory"); + asm volatile ("mov %%cr0, %0" : "=r"(save->cr0) : : "memory"); + asm volatile ("mov %%dr7, %0" : "=r"(save->dr7) : : "memory"); + asm volatile ("mov %%dr6, %0" : "=r"(save->dr6) : : "memory"); + asm volatile ("mov %%cr2, %0" : "=r"(save->cr2) : : "memory"); + save->g_pat = rdmsr(MSR_IA32_CR_PAT); + save->dbgctl = rdmsr(MSR_IA32_DEBUGCTLMSR); + ctrl->intercept = (1ULL << INTERCEPT_VMRUN) | + (1ULL << INTERCEPT_VMMCALL); + ctrl->msrpm_base_pa = svm->msr_gpa; + + vmcb->save.rip = (u64)guest_rip; + vmcb->save.rsp = (u64)guest_rsp; + guest_regs.rdi = (u64)svm; +} + +/* + * save/restore 64-bit general registers except rax, rip, rsp + * which are directly handed through the VMCB guest processor state + */ +#define SAVE_GPR_C \ + "xchg %%rbx, guest_regs+0x20\n\t" \ + "xchg %%rcx, guest_regs+0x10\n\t" \ + "xchg %%rdx, guest_regs+0x18\n\t" \ + "xchg %%rbp, guest_regs+0x30\n\t" \ + "xchg %%rsi, guest_regs+0x38\n\t" \ + "xchg %%rdi, guest_regs+0x40\n\t" \ + "xchg %%r8, guest_regs+0x48\n\t" \ + "xchg %%r9, guest_regs+0x50\n\t" \ + "xchg %%r10, guest_regs+0x58\n\t" \ + "xchg %%r11, guest_regs+0x60\n\t" \ + "xchg %%r12, guest_regs+0x68\n\t" \ + "xchg %%r13, guest_regs+0x70\n\t" \ + "xchg %%r14, guest_regs+0x78\n\t" \ + "xchg %%r15, guest_regs+0x80\n\t" + +#define LOAD_GPR_C SAVE_GPR_C + +/* + * selftests do not use interrupts so we dropped clgi/sti/cli/stgi + * for now. registers involved in LOAD/SAVE_GPR_C are eventually + * unmodified so they do not need to be in the clobber list. + */ +void run_guest(struct vmcb *vmcb, uint64_t vmcb_gpa) +{ + asm volatile ( + "vmload %[vmcb_gpa]\n\t" + "mov rflags, %%r15\n\t" // rflags + "mov %%r15, 0x170(%[vmcb])\n\t" + "mov guest_regs, %%r15\n\t" // rax + "mov %%r15, 0x1f8(%[vmcb])\n\t" + LOAD_GPR_C + "vmrun %[vmcb_gpa]\n\t" + SAVE_GPR_C + "mov 0x170(%[vmcb]), %%r15\n\t" // rflags + "mov %%r15, rflags\n\t" + "mov 0x1f8(%[vmcb]), %%r15\n\t" // rax + "mov %%r15, guest_regs\n\t" + "vmsave %[vmcb_gpa]\n\t" + : : [vmcb] "r" (vmcb), [vmcb_gpa] "a" (vmcb_gpa) + : "r15", "memory"); +} + +/* + * Open SEV_DEV_PATH if available, otherwise exit the entire program. + * + * Return: + * The opened file descriptor of /dev/sev. + */ +int open_sev_dev_path_or_exit(void) +{ + return open_path_or_exit(SEV_DEV_PATH, 0); +} -- cgit v1.2.3