From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/net/arp_ndisc_evict_nocarrier.sh | 227 +++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100755 tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh (limited to 'tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh') diff --git a/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh new file mode 100755 index 000000000..4a110bb01 --- /dev/null +++ b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh @@ -0,0 +1,227 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Tests sysctl options {arp,ndisc}_evict_nocarrier={0,1} +# +# Create a veth pair and set IPs/routes on both. Then ping to establish +# an entry in the ARP/ND table. Depending on the test set sysctl option to +# 1 or 0. Set remote veth down which will cause local veth to go into a no +# carrier state. Depending on the test check the ARP/ND table: +# +# {arp,ndisc}_evict_nocarrier=1 should contain no ARP/ND after no carrier +# {arp,ndisc}_evict_nocarrer=0 should still contain the single ARP/ND entry +# + +readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" +readonly V4_ADDR0=10.0.10.1 +readonly V4_ADDR1=10.0.10.2 +readonly V6_ADDR0=2001:db8:91::1 +readonly V6_ADDR1=2001:db8:91::2 +nsid=100 +ret=0 + +cleanup_v6() +{ + ip netns del me + ip netns del peer + + sysctl -w net.ipv6.conf.veth1.ndisc_evict_nocarrier=1 >/dev/null 2>&1 + sysctl -w net.ipv6.conf.all.ndisc_evict_nocarrier=1 >/dev/null 2>&1 +} + +create_ns() +{ + local n=${1} + + ip netns del ${n} 2>/dev/null + + ip netns add ${n} + ip netns set ${n} $((nsid++)) + ip -netns ${n} link set lo up +} + + +setup_v6() { + create_ns me + create_ns peer + + IP="ip -netns me" + + $IP li add veth1 type veth peer name veth2 + $IP li set veth1 up + $IP -6 addr add $V6_ADDR0/64 dev veth1 nodad + $IP li set veth2 netns peer up + ip -netns peer -6 addr add $V6_ADDR1/64 dev veth2 nodad + + ip netns exec me sysctl -w $1 >/dev/null 2>&1 + + # Establish an ND cache entry + ip netns exec me ping -6 -c1 -Iveth1 $V6_ADDR1 >/dev/null 2>&1 + # Should have the veth1 entry in ND table + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + if [ $? -ne 0 ]; then + cleanup_v6 + echo "failed" + exit 1 + fi + + # Set veth2 down, which will put veth1 in NOCARRIER state + ip netns exec peer ip link set veth2 down +} + +setup_v4() { + ip netns add "${PEER_NS}" + ip link add name veth0 type veth peer name veth1 + ip link set dev veth0 up + ip link set dev veth1 netns "${PEER_NS}" + ip netns exec "${PEER_NS}" ip link set dev veth1 up + ip addr add $V4_ADDR0/24 dev veth0 + ip netns exec "${PEER_NS}" ip addr add $V4_ADDR1/24 dev veth1 + ip netns exec ${PEER_NS} ip route add default via $V4_ADDR1 dev veth1 + ip route add default via $V4_ADDR0 dev veth0 + + sysctl -w "$1" >/dev/null 2>&1 + + # Establish an ARP cache entry + ping -c1 -I veth0 $V4_ADDR1 -q >/dev/null 2>&1 + # Should have the veth1 entry in ARP table + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + if [ $? -ne 0 ]; then + cleanup_v4 + echo "failed" + exit 1 + fi + + # Set veth1 down, which will put veth0 in NOCARRIER state + ip netns exec "${PEER_NS}" ip link set veth1 down +} + +cleanup_v4() { + ip neigh flush dev veth0 + ip link del veth0 + local -r ns="$(ip netns list|grep $PEER_NS)" + [ -n "$ns" ] && ip netns del $ns 2>/dev/null + + sysctl -w net.ipv4.conf.veth0.arp_evict_nocarrier=1 >/dev/null 2>&1 + sysctl -w net.ipv4.conf.all.arp_evict_nocarrier=1 >/dev/null 2>&1 +} + +# Run test when arp_evict_nocarrier = 1 (default). +run_arp_evict_nocarrier_enabled() { + echo "run arp_evict_nocarrier=1 test" + setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=1" + + # ARP table should be empty + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "failed" + ret=1 + else + echo "ok" + fi + + cleanup_v4 +} + +# Run test when arp_evict_nocarrier = 0 +run_arp_evict_nocarrier_disabled() { + echo "run arp_evict_nocarrier=0 test" + setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=0" + + # ARP table should still contain the entry + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + ret=1 + fi + + cleanup_v4 +} + +run_arp_evict_nocarrier_disabled_all() { + echo "run all.arp_evict_nocarrier=0 test" + setup_v4 "net.ipv4.conf.all.arp_evict_nocarrier=0" + + # ARP table should still contain the entry + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + fi + + cleanup_v4 +} + +run_ndisc_evict_nocarrier_enabled() { + echo "run ndisc_evict_nocarrier=1 test" + + setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=1" + + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "failed" + ret=1 + else + echo "ok" + fi + + cleanup_v6 +} + +run_ndisc_evict_nocarrier_disabled() { + echo "run ndisc_evict_nocarrier=0 test" + + setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=0" + + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + ret=1 + fi + + cleanup_v6 +} + +run_ndisc_evict_nocarrier_disabled_all() { + echo "run all.ndisc_evict_nocarrier=0 test" + + setup_v6 "net.ipv6.conf.all.ndisc_evict_nocarrier=0" + + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + ret=1 + fi + + cleanup_v6 +} + +run_all_tests() { + run_arp_evict_nocarrier_enabled + run_arp_evict_nocarrier_disabled + run_arp_evict_nocarrier_disabled_all + run_ndisc_evict_nocarrier_enabled + run_ndisc_evict_nocarrier_disabled + run_ndisc_evict_nocarrier_disabled_all +} + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip; +fi + +run_all_tests +exit $ret -- cgit v1.2.3