From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/net/forwarding/gre_multipath.sh | 257 +++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/gre_multipath.sh (limited to 'tools/testing/selftests/net/forwarding/gre_multipath.sh') diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh new file mode 100755 index 000000000..a8d8e8b3d --- /dev/null +++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh @@ -0,0 +1,257 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test traffic distribution when a wECMP route forwards traffic to two GRE +# tunnels. +# +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 192.0.2.1/28 | | +# +-------------------|-----+ +# | +# +-------------------|------------------------+ +# | SW1 | | +# | $ol1 + | +# | 192.0.2.2/28 | +# | | +# | + g1a (gre) + g1b (gre) | +# | loc=192.0.2.65 loc=192.0.2.81 | +# | rem=192.0.2.66 --. rem=192.0.2.82 --. | +# | tos=inherit | tos=inherit | | +# | .------------------' | | +# | | .------------------' | +# | v v | +# | + $ul1.111 (vlan) + $ul1.222 (vlan) | +# | | 192.0.2.129/28 | 192.0.2.145/28 | +# | \ / | +# | \________________/ | +# | | | +# | + $ul1 | +# +------------|-------------------------------+ +# | +# +------------|-------------------------------+ +# | SW2 + $ul2 | +# | _______|________ | +# | / \ | +# | / \ | +# | + $ul2.111 (vlan) + $ul2.222 (vlan) | +# | ^ 192.0.2.130/28 ^ 192.0.2.146/28 | +# | | | | +# | | '------------------. | +# | '------------------. | | +# | + g2a (gre) | + g2b (gre) | | +# | loc=192.0.2.66 | loc=192.0.2.82 | | +# | rem=192.0.2.65 --' rem=192.0.2.81 --' | +# | tos=inherit tos=inherit | +# | | +# | $ol2 + | +# | 192.0.2.17/28 | | +# +-------------------|------------------------+ +# | +# +-------------------|-----+ +# | H2 | | +# | $h2 + | +# | 192.0.2.18/28 | +# +-------------------------+ + +ALL_TESTS=" + ping_ipv4 + multipath_ipv4 +" + +NUM_NETIFS=6 +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64 + ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2 +} + +h1_destroy() +{ + ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2 + simple_if_fini $h1 192.0.2.1/28 +} + +sw1_create() +{ + simple_if_init $ol1 192.0.2.2/28 + __simple_if_init $ul1 v$ol1 + vlan_create $ul1 111 v$ol1 192.0.2.129/28 + vlan_create $ul1 222 v$ol1 192.0.2.145/28 + + tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1 + __simple_if_init g1a v$ol1 192.0.2.65/32 + ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130 + + tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1 + __simple_if_init g1b v$ol1 192.0.2.81/32 + ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146 + + ip route add vrf v$ol1 192.0.2.16/28 \ + nexthop dev g1a \ + nexthop dev g1b +} + +sw1_destroy() +{ + ip route del vrf v$ol1 192.0.2.16/28 + + ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146 + __simple_if_fini g1b 192.0.2.81/32 + tunnel_destroy g1b + + ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130 + __simple_if_fini g1a 192.0.2.65/32 + tunnel_destroy g1a + + vlan_destroy $ul1 222 + vlan_destroy $ul1 111 + __simple_if_fini $ul1 + simple_if_fini $ol1 192.0.2.2/28 +} + +sw2_create() +{ + simple_if_init $ol2 192.0.2.17/28 + __simple_if_init $ul2 v$ol2 + vlan_create $ul2 111 v$ol2 192.0.2.130/28 + vlan_create $ul2 222 v$ol2 192.0.2.146/28 + + tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2 + __simple_if_init g2a v$ol2 192.0.2.66/32 + ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129 + + tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2 + __simple_if_init g2b v$ol2 192.0.2.82/32 + ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145 + + ip route add vrf v$ol2 192.0.2.0/28 \ + nexthop dev g2a \ + nexthop dev g2b + + tc qdisc add dev $ul2 clsact + tc filter add dev $ul2 ingress pref 111 prot 802.1Q \ + flower vlan_id 111 action pass + tc filter add dev $ul2 ingress pref 222 prot 802.1Q \ + flower vlan_id 222 action pass +} + +sw2_destroy() +{ + tc qdisc del dev $ul2 clsact + + ip route del vrf v$ol2 192.0.2.0/28 + + ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145 + __simple_if_fini g2b 192.0.2.82/32 + tunnel_destroy g2b + + ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129 + __simple_if_fini g2a 192.0.2.66/32 + tunnel_destroy g2a + + vlan_destroy $ul2 222 + vlan_destroy $ul2 111 + __simple_if_fini $ul2 + simple_if_fini $ol2 192.0.2.17/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.18/28 + ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17 +} + +h2_destroy() +{ + ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17 + simple_if_fini $h2 192.0.2.18/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + ol1=${NETIFS[p2]} + + ul1=${NETIFS[p3]} + ul2=${NETIFS[p4]} + + ol2=${NETIFS[p5]} + h2=${NETIFS[p6]} + + vrf_prepare + h1_create + sw1_create + sw2_create + h2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + h2_destroy + sw2_destroy + sw1_destroy + h1_destroy + vrf_cleanup +} + +multipath4_test() +{ + local what=$1; shift + local weight1=$1; shift + local weight2=$1; shift + + sysctl_set net.ipv4.fib_multipath_hash_policy 1 + ip route replace vrf v$ol1 192.0.2.16/28 \ + nexthop dev g1a weight $weight1 \ + nexthop dev g1b weight $weight2 + + local t0_111=$(tc_rule_stats_get $ul2 111 ingress) + local t0_222=$(tc_rule_stats_get $ul2 222 ingress) + + ip vrf exec v$h1 \ + $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \ + -d 1msec -t udp "sp=1024,dp=0-32768" + + local t1_111=$(tc_rule_stats_get $ul2 111 ingress) + local t1_222=$(tc_rule_stats_get $ul2 222 ingress) + + local d111=$((t1_111 - t0_111)) + local d222=$((t1_222 - t0_222)) + multipath_eval "$what" $weight1 $weight2 $d111 $d222 + + ip route replace vrf v$ol1 192.0.2.16/28 \ + nexthop dev g1a \ + nexthop dev g1b + sysctl_restore net.ipv4.fib_multipath_hash_policy +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.18 +} + +multipath_ipv4() +{ + log_info "Running IPv4 multipath tests" + multipath4_test "ECMP" 1 1 + multipath4_test "Weighted MP 2:1" 2 1 + multipath4_test "Weighted MP 11:45" 11 45 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3