From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/net/forwarding/router_mpath_nh.sh | 425 +++++++++++++++++++++ 1 file changed, 425 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/router_mpath_nh.sh (limited to 'tools/testing/selftests/net/forwarding/router_mpath_nh.sh') diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh new file mode 100755 index 000000000..a0d612e04 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh @@ -0,0 +1,425 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + multipath_test + ping_ipv4_blackhole + ping_ipv6_blackhole +" +NUM_NETIFS=8 +source lib.sh + +h1_create() +{ + vrf_create "vrf-h1" + ip link set dev $h1 master vrf-h1 + + ip link set dev vrf-h1 up + ip link set dev $h1 up + + ip address add 192.0.2.2/24 dev $h1 + ip address add 2001:db8:1::2/64 dev $h1 + + ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1 + ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1 +} + +h1_destroy() +{ + ip route del 2001:db8:2::/64 vrf vrf-h1 + ip route del 198.51.100.0/24 vrf vrf-h1 + + ip address del 2001:db8:1::2/64 dev $h1 + ip address del 192.0.2.2/24 dev $h1 + + ip link set dev $h1 down + vrf_destroy "vrf-h1" +} + +h2_create() +{ + vrf_create "vrf-h2" + ip link set dev $h2 master vrf-h2 + + ip link set dev vrf-h2 up + ip link set dev $h2 up + + ip address add 198.51.100.2/24 dev $h2 + ip address add 2001:db8:2::2/64 dev $h2 + + ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1 + ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1 +} + +h2_destroy() +{ + ip route del 2001:db8:1::/64 vrf vrf-h2 + ip route del 192.0.2.0/24 vrf vrf-h2 + + ip address del 2001:db8:2::2/64 dev $h2 + ip address del 198.51.100.2/24 dev $h2 + + ip link set dev $h2 down + vrf_destroy "vrf-h2" +} + +router1_create() +{ + vrf_create "vrf-r1" + ip link set dev $rp11 master vrf-r1 + ip link set dev $rp12 master vrf-r1 + ip link set dev $rp13 master vrf-r1 + + ip link set dev vrf-r1 up + ip link set dev $rp11 up + ip link set dev $rp12 up + ip link set dev $rp13 up + + ip address add 192.0.2.1/24 dev $rp11 + ip address add 2001:db8:1::1/64 dev $rp11 + + ip address add 169.254.2.12/24 dev $rp12 + ip address add fe80:2::12/64 dev $rp12 + + ip address add 169.254.3.13/24 dev $rp13 + ip address add fe80:3::13/64 dev $rp13 +} + +router1_destroy() +{ + ip route del 2001:db8:2::/64 vrf vrf-r1 + ip route del 198.51.100.0/24 vrf vrf-r1 + + ip address del fe80:3::13/64 dev $rp13 + ip address del 169.254.3.13/24 dev $rp13 + + ip address del fe80:2::12/64 dev $rp12 + ip address del 169.254.2.12/24 dev $rp12 + + ip address del 2001:db8:1::1/64 dev $rp11 + ip address del 192.0.2.1/24 dev $rp11 + + ip nexthop del id 103 + ip nexthop del id 101 + ip nexthop del id 102 + ip nexthop del id 106 + ip nexthop del id 104 + ip nexthop del id 105 + + ip link set dev $rp13 down + ip link set dev $rp12 down + ip link set dev $rp11 down + + vrf_destroy "vrf-r1" +} + +router2_create() +{ + vrf_create "vrf-r2" + ip link set dev $rp21 master vrf-r2 + ip link set dev $rp22 master vrf-r2 + ip link set dev $rp23 master vrf-r2 + + ip link set dev vrf-r2 up + ip link set dev $rp21 up + ip link set dev $rp22 up + ip link set dev $rp23 up + + ip address add 198.51.100.1/24 dev $rp21 + ip address add 2001:db8:2::1/64 dev $rp21 + + ip address add 169.254.2.22/24 dev $rp22 + ip address add fe80:2::22/64 dev $rp22 + + ip address add 169.254.3.23/24 dev $rp23 + ip address add fe80:3::23/64 dev $rp23 +} + +router2_destroy() +{ + ip route del 2001:db8:1::/64 vrf vrf-r2 + ip route del 192.0.2.0/24 vrf vrf-r2 + + ip address del fe80:3::23/64 dev $rp23 + ip address del 169.254.3.23/24 dev $rp23 + + ip address del fe80:2::22/64 dev $rp22 + ip address del 169.254.2.22/24 dev $rp22 + + ip address del 2001:db8:2::1/64 dev $rp21 + ip address del 198.51.100.1/24 dev $rp21 + + ip nexthop del id 201 + ip nexthop del id 202 + ip nexthop del id 204 + ip nexthop del id 205 + + ip link set dev $rp23 down + ip link set dev $rp22 down + ip link set dev $rp21 down + + vrf_destroy "vrf-r2" +} + +routing_nh_obj() +{ + ip nexthop add id 101 via 169.254.2.22 dev $rp12 + ip nexthop add id 102 via 169.254.3.23 dev $rp13 + ip nexthop add id 103 group 101/102 + ip route add 198.51.100.0/24 vrf vrf-r1 nhid 103 + + ip nexthop add id 104 via fe80:2::22 dev $rp12 + ip nexthop add id 105 via fe80:3::23 dev $rp13 + ip nexthop add id 106 group 104/105 + ip route add 2001:db8:2::/64 vrf vrf-r1 nhid 106 + + ip nexthop add id 201 via 169.254.2.12 dev $rp22 + ip nexthop add id 202 via 169.254.3.13 dev $rp23 + ip nexthop add id 203 group 201/202 + ip route add 192.0.2.0/24 vrf vrf-r2 nhid 203 + + ip nexthop add id 204 via fe80:2::12 dev $rp22 + ip nexthop add id 205 via fe80:3::13 dev $rp23 + ip nexthop add id 206 group 204/205 + ip route add 2001:db8:1::/64 vrf vrf-r2 nhid 206 +} + +multipath4_test() +{ + local desc="$1" + local weight_rp12=$2 + local weight_rp13=$3 + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 + local packets_rp12 packets_rp13 + + # Transmit multiple flows from h1 to h2 and make sure they are + # distributed between both multipath links (rp12 and rp13) + # according to the configured weights. + sysctl_set net.ipv4.fib_multipath_hash_policy 1 + ip nexthop replace id 103 group 101,$weight_rp12/102,$weight_rp13 + + t0_rp12=$(link_stats_tx_packets_get $rp12) + t0_rp13=$(link_stats_tx_packets_get $rp13) + + ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \ + -d 1msec -t udp "sp=1024,dp=0-32768" + + t1_rp12=$(link_stats_tx_packets_get $rp12) + t1_rp13=$(link_stats_tx_packets_get $rp13) + + let "packets_rp12 = $t1_rp12 - $t0_rp12" + let "packets_rp13 = $t1_rp13 - $t0_rp13" + multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13 + + # Restore settings. + ip nexthop replace id 103 group 101/102 + sysctl_restore net.ipv4.fib_multipath_hash_policy +} + +multipath6_l4_test() +{ + local desc="$1" + local weight_rp12=$2 + local weight_rp13=$3 + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 + local packets_rp12 packets_rp13 + + # Transmit multiple flows from h1 to h2 and make sure they are + # distributed between both multipath links (rp12 and rp13) + # according to the configured weights. + sysctl_set net.ipv6.fib_multipath_hash_policy 1 + + ip nexthop replace id 106 group 104,$weight_rp12/105,$weight_rp13 + + t0_rp12=$(link_stats_tx_packets_get $rp12) + t0_rp13=$(link_stats_tx_packets_get $rp13) + + $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \ + -d 1msec -t udp "sp=1024,dp=0-32768" + + t1_rp12=$(link_stats_tx_packets_get $rp12) + t1_rp13=$(link_stats_tx_packets_get $rp13) + + let "packets_rp12 = $t1_rp12 - $t0_rp12" + let "packets_rp13 = $t1_rp13 - $t0_rp13" + multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13 + + ip nexthop replace id 106 group 104/105 + + sysctl_restore net.ipv6.fib_multipath_hash_policy +} + +multipath6_test() +{ + local desc="$1" + local weight_rp12=$2 + local weight_rp13=$3 + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 + local packets_rp12 packets_rp13 + + ip nexthop replace id 106 group 104,$weight_rp12/105,$weight_rp13 + + t0_rp12=$(link_stats_tx_packets_get $rp12) + t0_rp13=$(link_stats_tx_packets_get $rp13) + + # Generate 16384 echo requests, each with a random flow label. + for _ in $(seq 1 16384); do + ip vrf exec vrf-h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1 + done + + t1_rp12=$(link_stats_tx_packets_get $rp12) + t1_rp13=$(link_stats_tx_packets_get $rp13) + + let "packets_rp12 = $t1_rp12 - $t0_rp12" + let "packets_rp13 = $t1_rp13 - $t0_rp13" + multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13 + + ip nexthop replace id 106 group 104/105 +} + +multipath_test() +{ + log_info "Running IPv4 multipath tests" + multipath4_test "ECMP" 1 1 + multipath4_test "Weighted MP 2:1" 2 1 + multipath4_test "Weighted MP 11:45" 11 45 + + log_info "Running IPv4 multipath tests with IPv6 link-local nexthops" + ip nexthop replace id 101 via fe80:2::22 dev $rp12 + ip nexthop replace id 102 via fe80:3::23 dev $rp13 + + multipath4_test "ECMP" 1 1 + multipath4_test "Weighted MP 2:1" 2 1 + multipath4_test "Weighted MP 11:45" 11 45 + + ip nexthop replace id 102 via 169.254.3.23 dev $rp13 + ip nexthop replace id 101 via 169.254.2.22 dev $rp12 + + log_info "Running IPv6 multipath tests" + multipath6_test "ECMP" 1 1 + multipath6_test "Weighted MP 2:1" 2 1 + multipath6_test "Weighted MP 11:45" 11 45 + + log_info "Running IPv6 L4 hash multipath tests" + multipath6_l4_test "ECMP" 1 1 + multipath6_l4_test "Weighted MP 2:1" 2 1 + multipath6_l4_test "Weighted MP 11:45" 11 45 +} + +ping_ipv4_blackhole() +{ + RET=0 + + ip nexthop add id 1001 blackhole + ip nexthop add id 1002 group 1001 + + ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 1001 + ping_do $h1 198.51.100.2 + check_fail $? "ping did not fail when using a blackhole nexthop" + + ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 1002 + ping_do $h1 198.51.100.2 + check_fail $? "ping did not fail when using a blackhole nexthop group" + + ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 103 + ping_do $h1 198.51.100.2 + check_err $? "ping failed with a valid nexthop" + + log_test "IPv4 blackhole ping" + + ip nexthop del id 1002 + ip nexthop del id 1001 +} + +ping_ipv6_blackhole() +{ + RET=0 + + ip -6 nexthop add id 1001 blackhole + ip nexthop add id 1002 group 1001 + + ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 1001 + ping6_do $h1 2001:db8:2::2 + check_fail $? "ping did not fail when using a blackhole nexthop" + + ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 1002 + ping6_do $h1 2001:db8:2::2 + check_fail $? "ping did not fail when using a blackhole nexthop group" + + ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 106 + ping6_do $h1 2001:db8:2::2 + check_err $? "ping failed with a valid nexthop" + + log_test "IPv6 blackhole ping" + + ip nexthop del id 1002 + ip -6 nexthop del id 1001 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp11=${NETIFS[p2]} + + rp12=${NETIFS[p3]} + rp22=${NETIFS[p4]} + + rp13=${NETIFS[p5]} + rp23=${NETIFS[p6]} + + rp21=${NETIFS[p7]} + h2=${NETIFS[p8]} + + vrf_prepare + + h1_create + h2_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 198.51.100.2 +} + +ping_ipv6() +{ + ping6_test $h1 2001:db8:2::2 +} + +ip nexthop ls >/dev/null 2>&1 +if [ $? -ne 0 ]; then + echo "Nexthop objects not supported; skipping tests" + exit $ksft_skip +fi + +trap cleanup EXIT + +setup_prepare +setup_wait +routing_nh_obj + +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3