From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/net/forwarding/tsn_lib.sh | 249 ++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 tools/testing/selftests/net/forwarding/tsn_lib.sh (limited to 'tools/testing/selftests/net/forwarding/tsn_lib.sh') diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh new file mode 100644 index 000000000..b91bcd800 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh @@ -0,0 +1,249 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes} +REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes} + +# Tunables +UTC_TAI_OFFSET=37 +ISOCHRON_CPU=1 + +if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then + # https://github.com/vladimiroltean/tsn-scripts + # WARNING: isochron versions pre-1.0 are unstable, + # always use the latest version + require_command isochron +fi +if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then + require_command phc2sys + require_command ptp4l +fi + +phc2sys_start() +{ + local uds_address=$1 + local extra_args="" + + if ! [ -z "${uds_address}" ]; then + extra_args="${extra_args} -z ${uds_address}" + fi + + phc2sys_log="$(mktemp)" + + chrt -f 10 phc2sys -m \ + -a -rr \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + ${extra_args} \ + > "${phc2sys_log}" 2>&1 & + phc2sys_pid=$! + + echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}" + + sleep 1 +} + +phc2sys_stop() +{ + { kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null + rm "${phc2sys_log}" 2> /dev/null +} + +# Replace space separators from interface list with underscores +if_names_to_label() +{ + local if_name_list="$1" + + echo "${if_name_list/ /_}" +} + +ptp4l_start() +{ + local if_names="$1" + local slave_only=$2 + local uds_address=$3 + local log="ptp4l_log_$(if_names_to_label ${if_names})" + local pid="ptp4l_pid_$(if_names_to_label ${if_names})" + local extra_args="" + + for if_name in ${if_names}; do + extra_args="${extra_args} -i ${if_name}" + done + + if [ "${slave_only}" = true ]; then + extra_args="${extra_args} -s" + fi + + # declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name} + # as global, so that they can be referenced later + declare -g "${log}=$(mktemp)" + + chrt -f 10 ptp4l -m -2 -P \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + --tx_timestamp_timeout 100 \ + --uds_address="${uds_address}" \ + ${extra_args} \ + > "${!log}" 2>&1 & + declare -g "${pid}=$!" + + echo "ptp4l for interfaces ${if_names} logs to ${!log} and has pid ${!pid}" + + sleep 1 +} + +ptp4l_stop() +{ + local if_names="$1" + local log="ptp4l_log_$(if_names_to_label ${if_names})" + local pid="ptp4l_pid_$(if_names_to_label ${if_names})" + + { kill ${!pid} && wait ${!pid}; } 2> /dev/null + rm "${!log}" 2> /dev/null +} + +cpufreq_max() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + # Kernel may be compiled with CONFIG_CPU_FREQ disabled + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + # declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as + # global, so they can be referenced later + declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)" + declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)" + + cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "performance" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +cpufreq_restore() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "${!governor}" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +isochron_recv_start() +{ + local if_name=$1 + local uds=$2 + local stats_port=$3 + local extra_args=$4 + local pid="isochron_pid_${stats_port}" + + if ! [ -z "${uds}" ]; then + extra_args="${extra_args} --unix-domain-socket ${uds}" + fi + + isochron rcv \ + --interface ${if_name} \ + --sched-priority 98 \ + --sched-fifo \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --stats-port ${stats_port} \ + --quiet \ + ${extra_args} & \ + declare -g "${pid}=$!" + + sleep 1 +} + +isochron_recv_stop() +{ + local stats_port=$1 + local pid="isochron_pid_${stats_port}" + + { kill ${!pid} && wait ${!pid}; } 2> /dev/null +} + +isochron_do() +{ + local sender_if_name=$1; shift + local receiver_if_name=$1; shift + local sender_uds=$1; shift + local receiver_uds=$1; shift + local base_time=$1; shift + local cycle_time=$1; shift + local shift_time=$1; shift + local num_pkts=$1; shift + local vid=$1; shift + local priority=$1; shift + local dst_ip=$1; shift + local isochron_dat=$1; shift + local extra_args="" + local receiver_extra_args="" + local vrf="$(master_name_get ${sender_if_name})" + local use_l2="true" + + if ! [ -z "${dst_ip}" ]; then + use_l2="false" + fi + + if ! [ -z "${vrf}" ]; then + dst_ip="${dst_ip}%${vrf}" + fi + + if ! [ -z "${vid}" ]; then + vid="--vid=${vid}" + fi + + if [ -z "${receiver_uds}" ]; then + extra_args="${extra_args} --omit-remote-sync" + fi + + if ! [ -z "${shift_time}" ]; then + extra_args="${extra_args} --shift-time=${shift_time}" + fi + + if [ "${use_l2}" = "true" ]; then + extra_args="${extra_args} --l2 --etype=0xdead ${vid}" + receiver_extra_args="--l2 --etype=0xdead" + else + extra_args="${extra_args} --l4 --ip-destination=${dst_ip}" + receiver_extra_args="--l4" + fi + + cpufreq_max ${ISOCHRON_CPU} + + isochron_recv_start "${h2}" "${receiver_uds}" 5000 "${receiver_extra_args}" + + isochron send \ + --interface ${sender_if_name} \ + --unix-domain-socket ${sender_uds} \ + --priority ${priority} \ + --base-time ${base_time} \ + --cycle-time ${cycle_time} \ + --num-frames ${num_pkts} \ + --frame-size 64 \ + --txtime \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --cpu-mask $((1 << ${ISOCHRON_CPU})) \ + --sched-fifo \ + --sched-priority 98 \ + --client 127.0.0.1 \ + --sync-threshold 5000 \ + --output-file ${isochron_dat} \ + ${extra_args} \ + --quiet + + isochron_recv_stop 5000 + + cpufreq_restore ${ISOCHRON_CPU} +} -- cgit v1.2.3