From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/net/forwarding/vxlan_asymmetric.sh | 577 +++++++++++++++++++++ 1 file changed, 577 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh (limited to 'tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh') diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh new file mode 100755 index 000000000..43469c7de --- /dev/null +++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh @@ -0,0 +1,577 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +---------------------------+ +------------------------------+ +# | vrf-h1 | | vrf-h2 | +# | + $h1 | | + $h2 | +# | | 10.1.1.101/24 | | | 10.1.2.101/24 | +# | | default via 10.1.1.1 | | | default via 10.1.2.1 | +# +----|----------------------+ +----|-------------------------+ +# | | +# +----|--------------------------------------------|-------------------------+ +# | SW | | | +# | +--|--------------------------------------------|-----------------------+ | +# | | + $swp1 br1 + $swp2 | | +# | | vid 10 pvid untagged vid 20 pvid untagged | | +# | | | | +# | | + vx10 + vx20 | | +# | | local 10.0.0.1 local 10.0.0.1 | | +# | | remote 10.0.0.2 remote 10.0.0.2 | | +# | | id 1000 id 2000 | | +# | | dstport 4789 dstport 4789 | | +# | | vid 10 pvid untagged vid 20 pvid untagged | | +# | | | | +# | +-----------------------------------+-----------------------------------+ | +# | | | +# | +-----------------------------------|-----------------------------------+ | +# | | | | | +# | | +--------------------------------+--------------------------------+ | | +# | | | | | | +# | | + vlan10 vlan20 + | | +# | | | 10.1.1.11/24 10.1.2.11/24 | | | +# | | | | | | +# | | + vlan10-v (macvlan) vlan20-v (macvlan) + | | +# | | 10.1.1.1/24 10.1.2.1/24 | | +# | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | | +# | | vrf-green | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 +lo | +# | | 192.0.2.1/24 10.0.0.1/32 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | vrf-spine | +# | + $rp2 | +# | 192.0.2.2/24 | +# | | (maybe) HW +# ============================================================================= +# | | (likely) SW +# | | +# | + v1 (veth) | +# | | 192.0.3.2/24 | +# +----|--------------------------------------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | + v2 (veth) +lo NS1 (netns) | +# | 192.0.3.1/24 10.0.0.2/32 | +# | | +# | +-----------------------------------------------------------------------+ | +# | | vrf-green | | +# | | + vlan10-v (macvlan) vlan20-v (macvlan) + | | +# | | | 10.1.1.1/24 10.1.2.1/24 | | | +# | | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | | | +# | | | | | | +# | | + vlan10 vlan20 + | | +# | | | 10.1.1.12/24 10.1.2.12/24 | | | +# | | | | | | +# | | +--------------------------------+--------------------------------+ | | +# | | | | | +# | +-----------------------------------|-----------------------------------+ | +# | | | +# | +-----------------------------------+-----------------------------------+ | +# | | | | +# | | + vx10 + vx20 | | +# | | local 10.0.0.2 local 10.0.0.2 | | +# | | remote 10.0.0.1 remote 10.0.0.1 | | +# | | id 1000 id 2000 | | +# | | dstport 4789 dstport 4789 | | +# | | vid 10 pvid untagged vid 20 pvid untagged | | +# | | | | +# | | + w1 (veth) + w3 (veth) | | +# | | | vid 10 pvid untagged br1 | vid 20 pvid untagged | | +# | +--|------------------------------------------|-------------------------+ | +# | | | | +# | | | | +# | +--|----------------------+ +--|-------------------------+ | +# | | | vrf-h1 | | | vrf-h2 | | +# | | + w2 (veth) | | + w4 (veth) | | +# | | 10.1.1.102/24 | | 10.1.2.102/24 | | +# | | default via 10.1.1.1 | | default via 10.1.2.1 | | +# | +-------------------------+ +----------------------------+ | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + arp_decap + arp_suppression +" +NUM_NETIFS=6 +source lib.sh + +require_command $ARPING + +hx_create() +{ + local vrf_name=$1; shift + local if_name=$1; shift + local ip_addr=$1; shift + local gw_ip=$1; shift + + vrf_create $vrf_name + ip link set dev $if_name master $vrf_name + ip link set dev $vrf_name up + ip link set dev $if_name up + + ip address add $ip_addr/24 dev $if_name + ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \ + dev $if_name + ip route add default vrf $vrf_name nexthop via $gw_ip +} +export -f hx_create + +hx_destroy() +{ + local vrf_name=$1; shift + local if_name=$1; shift + local ip_addr=$1; shift + local gw_ip=$1; shift + + ip route del default vrf $vrf_name nexthop via $gw_ip + ip neigh del $gw_ip dev $if_name + ip address del $ip_addr/24 dev $if_name + + ip link set dev $if_name down + vrf_destroy $vrf_name +} + +h1_create() +{ + hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1 +} + +h1_destroy() +{ + hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1 +} + +h2_create() +{ + hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1 +} + +h2_destroy() +{ + hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ + mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + ip link set dev $rp1 up + ip address add dev $rp1 192.0.2.1/24 + ip route add 10.0.0.2/32 nexthop via 192.0.2.2 + + ip link add name vx10 type vxlan id 1000 \ + local 10.0.0.1 remote 10.0.0.2 dstport 4789 \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx10 up + + ip link set dev vx10 master br1 + bridge vlan add vid 10 dev vx10 pvid untagged + + ip link add name vx20 type vxlan id 2000 \ + local 10.0.0.1 remote 10.0.0.2 dstport 4789 \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx20 up + + ip link set dev vx20 master br1 + bridge vlan add vid 20 dev vx20 pvid untagged + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + bridge vlan add vid 10 dev $swp1 pvid untagged + + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + bridge vlan add vid 20 dev $swp2 pvid untagged + + ip address add 10.0.0.1/32 dev lo + + # Create SVIs + vrf_create "vrf-green" + ip link set dev vrf-green up + + ip link add link br1 name vlan10 up master vrf-green type vlan id 10 + ip address add 10.1.1.11/24 dev vlan10 + ip link add link vlan10 name vlan10-v up master vrf-green \ + address 00:00:5e:00:01:01 type macvlan mode private + ip address add 10.1.1.1/24 dev vlan10-v + + ip link add link br1 name vlan20 up master vrf-green type vlan id 20 + ip address add 10.1.2.11/24 dev vlan20 + ip link add link vlan20 name vlan20-v up master vrf-green \ + address 00:00:5e:00:01:01 type macvlan mode private + ip address add 10.1.2.1/24 dev vlan20-v + + bridge vlan add vid 10 dev br1 self + bridge vlan add vid 20 dev br1 self + + bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10 + bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20 + + sysctl_set net.ipv4.conf.all.rp_filter 0 + sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0 + sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0 +} + +switch_destroy() +{ + sysctl_restore net.ipv4.conf.all.rp_filter + + bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20 + bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10 + + bridge vlan del vid 20 dev br1 self + bridge vlan del vid 10 dev br1 self + + ip link del dev vlan20 + + ip link del dev vlan10 + + vrf_destroy "vrf-green" + + ip address del 10.0.0.1/32 dev lo + + bridge vlan del vid 20 dev $swp2 + ip link set dev $swp2 down + ip link set dev $swp2 nomaster + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + bridge vlan del vid 20 dev vx20 + ip link set dev vx20 nomaster + + ip link set dev vx20 down + ip link del dev vx20 + + bridge vlan del vid 10 dev vx10 + ip link set dev vx10 nomaster + + ip link set dev vx10 down + ip link del dev vx10 + + ip route del 10.0.0.2/32 nexthop via 192.0.2.2 + ip address del dev $rp1 192.0.2.1/24 + ip link set dev $rp1 down + + ip link set dev br1 down + ip link del dev br1 +} + +spine_create() +{ + vrf_create "vrf-spine" + ip link set dev $rp2 master vrf-spine + ip link set dev v1 master vrf-spine + ip link set dev vrf-spine up + ip link set dev $rp2 up + ip link set dev v1 up + + ip address add 192.0.2.2/24 dev $rp2 + ip address add 192.0.3.2/24 dev v1 + + ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1 + ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1 +} + +spine_destroy() +{ + ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1 + ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1 + + ip address del 192.0.3.2/24 dev v1 + ip address del 192.0.2.2/24 dev $rp2 + + ip link set dev v1 down + ip link set dev $rp2 down + vrf_destroy "vrf-spine" +} + +ns_h1_create() +{ + hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1 +} +export -f ns_h1_create + +ns_h2_create() +{ + hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1 +} +export -f ns_h2_create + +ns_switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ + mcast_snooping 0 + ip link set dev br1 up + + ip link set dev v2 up + ip address add dev v2 192.0.3.1/24 + ip route add 10.0.0.1/32 nexthop via 192.0.3.2 + + ip link add name vx10 type vxlan id 1000 \ + local 10.0.0.2 remote 10.0.0.1 dstport 4789 \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx10 up + + ip link set dev vx10 master br1 + bridge vlan add vid 10 dev vx10 pvid untagged + + ip link add name vx20 type vxlan id 2000 \ + local 10.0.0.2 remote 10.0.0.1 dstport 4789 \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx20 up + + ip link set dev vx20 master br1 + bridge vlan add vid 20 dev vx20 pvid untagged + + ip link set dev w1 master br1 + ip link set dev w1 up + bridge vlan add vid 10 dev w1 pvid untagged + + ip link set dev w3 master br1 + ip link set dev w3 up + bridge vlan add vid 20 dev w3 pvid untagged + + ip address add 10.0.0.2/32 dev lo + + # Create SVIs + vrf_create "vrf-green" + ip link set dev vrf-green up + + ip link add link br1 name vlan10 up master vrf-green type vlan id 10 + ip address add 10.1.1.12/24 dev vlan10 + ip link add link vlan10 name vlan10-v up master vrf-green \ + address 00:00:5e:00:01:01 type macvlan mode private + ip address add 10.1.1.1/24 dev vlan10-v + + ip link add link br1 name vlan20 up master vrf-green type vlan id 20 + ip address add 10.1.2.12/24 dev vlan20 + ip link add link vlan20 name vlan20-v up master vrf-green \ + address 00:00:5e:00:01:01 type macvlan mode private + ip address add 10.1.2.1/24 dev vlan20-v + + bridge vlan add vid 10 dev br1 self + bridge vlan add vid 20 dev br1 self + + bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10 + bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20 + + sysctl_set net.ipv4.conf.all.rp_filter 0 + sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0 + sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0 +} +export -f ns_switch_create + +ns_init() +{ + ip link add name w1 type veth peer name w2 + ip link add name w3 type veth peer name w4 + + ip link set dev lo up + + ns_h1_create + ns_h2_create + ns_switch_create +} +export -f ns_init + +ns1_create() +{ + ip netns add ns1 + ip link set dev v2 netns ns1 + in_ns ns1 ns_init +} + +ns1_destroy() +{ + ip netns exec ns1 ip link set dev v2 netns 1 + ip netns del ns1 +} + +macs_populate() +{ + local mac1=$1; shift + local mac2=$1; shift + local ip1=$1; shift + local ip2=$1; shift + local dst=$1; shift + + bridge fdb add $mac1 dev vx10 self master extern_learn static \ + dst $dst vlan 10 + bridge fdb add $mac2 dev vx20 self master extern_learn static \ + dst $dst vlan 20 + + ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \ + extern_learn + ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \ + extern_learn +} +export -f macs_populate + +macs_initialize() +{ + local h1_ns_mac=$(in_ns ns1 mac_get w2) + local h2_ns_mac=$(in_ns ns1 mac_get w4) + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + macs_populate $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2 + in_ns ns1 macs_populate $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1=${NETIFS[p5]} + rp2=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + switch_create + + ip link add name v1 type veth peer name v2 + spine_create + ns1_create + + macs_initialize +} + +cleanup() +{ + pre_cleanup + + ns1_destroy + spine_destroy + ip link del dev v1 + + switch_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20" + ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10" + ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20" + ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20" + ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10" +} + +arp_decap() +{ + # Repeat the ping tests, but without populating the neighbours. This + # makes sure we correctly decapsulate ARP packets + log_info "deleting neighbours from vlan interfaces" + + ip neigh del 10.1.1.102 dev vlan10 + ip neigh del 10.1.2.102 dev vlan20 + + ping_ipv4 + + ip neigh replace 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \ + dev vlan10 extern_learn + ip neigh replace 10.1.2.102 lladdr $(in_ns ns1 mac_get w4) nud noarp \ + dev vlan20 extern_learn +} + +arp_suppression_compare() +{ + local expect=$1; shift + local actual=$(in_ns ns1 tc_rule_stats_get vx10 1 ingress) + + (( expect == actual )) + check_err $? "expected $expect arps got $actual" +} + +arp_suppression() +{ + ip link set dev vx10 type bridge_slave neigh_suppress on + + in_ns ns1 tc qdisc add dev vx10 clsact + in_ns ns1 tc filter add dev vx10 ingress proto arp pref 1 handle 101 \ + flower dst_mac ff:ff:ff:ff:ff:ff arp_tip 10.1.1.102 arp_op \ + request action pass + + # The neighbour is configured on the SVI and ARP suppression is on, so + # the ARP request should be suppressed + RET=0 + + $ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102 + check_err $? "arping failed" + + arp_suppression_compare 0 + + log_test "neigh_suppress: on / neigh exists: yes" + + # Delete the neighbour from the SVI. A single ARP request should be + # received by the remote VTEP + RET=0 + + ip neigh del 10.1.1.102 dev vlan10 + + $ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102 + check_err $? "arping failed" + + arp_suppression_compare 1 + + log_test "neigh_suppress: on / neigh exists: no" + + # Turn off ARP suppression and make sure ARP is not suppressed, + # regardless of neighbour existence on the SVI + RET=0 + + ip neigh del 10.1.1.102 dev vlan10 &> /dev/null + ip link set dev vx10 type bridge_slave neigh_suppress off + + $ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102 + check_err $? "arping failed" + + arp_suppression_compare 2 + + log_test "neigh_suppress: off / neigh exists: no" + + RET=0 + + ip neigh add 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \ + dev vlan10 extern_learn + + $ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102 + check_err $? "arping failed" + + arp_suppression_compare 3 + + log_test "neigh_suppress: off / neigh exists: yes" + + in_ns ns1 tc qdisc del dev vx10 clsact +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3