From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/net/l2tp.sh | 382 ++++++++++++++++++++++++++++++++++++ 1 file changed, 382 insertions(+) create mode 100755 tools/testing/selftests/net/l2tp.sh (limited to 'tools/testing/selftests/net/l2tp.sh') diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh new file mode 100755 index 000000000..578243388 --- /dev/null +++ b/tools/testing/selftests/net/l2tp.sh @@ -0,0 +1,382 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# L2TPv3 tunnel between 2 hosts +# +# host-1 | router | host-2 +# | | +# lo l2tp | | l2tp lo +# 172.16.101.1 172.16.1.1 | | 172.16.1.2 172.16.101.2 +# fc00:101::1 fc00:1::1 | | fc00:1::2 fc00:101::2 +# | | +# eth0 | | eth0 +# 10.1.1.1 | | 10.1.2.1 +# 2001:db8:1::1 | | 2001:db8:2::1 + +VERBOSE=0 +PAUSE_ON_FAIL=no + +which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) + +################################################################################ +# +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf "TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf "TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +run_cmd() +{ + local ns + local cmd + local out + local rc + + ns="$1" + shift + cmd="$*" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + fi + + out=$(eval ip netns exec ${ns} ${cmd} 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + + [ "$VERBOSE" = "1" ] && echo + + return $rc +} + +################################################################################ +# create namespaces and interconnects + +create_ns() +{ + local ns=$1 + local addr=$2 + local addr6=$3 + + [ -z "${addr}" ] && addr="-" + [ -z "${addr6}" ] && addr6="-" + + ip netns add ${ns} + + ip -netns ${ns} link set lo up + if [ "${addr}" != "-" ]; then + ip -netns ${ns} addr add dev lo ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip -netns ${ns} -6 addr add dev lo ${addr6} + fi + + ip -netns ${ns} ro add unreachable default metric 8192 + ip -netns ${ns} -6 ro add unreachable default metric 8192 + + ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0 +} + +# create veth pair to connect namespaces and apply addresses. +connect_ns() +{ + local ns1=$1 + local ns1_dev=$2 + local ns1_addr=$3 + local ns1_addr6=$4 + local ns2=$5 + local ns2_dev=$6 + local ns2_addr=$7 + local ns2_addr6=$8 + + ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp + ip -netns ${ns1} li set ${ns1_dev} up + ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev} + ip -netns ${ns2} li set ${ns2_dev} up + + if [ "${ns1_addr}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr} + fi + + if [ "${ns1_addr6}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6} + fi +} + +################################################################################ +# test setup + +cleanup() +{ + local ns + + for ns in host-1 host-2 router + do + ip netns del ${ns} 2>/dev/null + done +} + +setup_l2tp_ipv4() +{ + # + # configure l2tpv3 tunnel on host-1 + # + ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \ + encap ip local 10.1.1.1 remote 10.1.2.1 + ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \ + session_id 1041 peer_session_id 1042 + ip -netns host-1 link set dev l2tp4 up + ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2 + + # + # configure l2tpv3 tunnel on host-2 + # + ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \ + encap ip local 10.1.2.1 remote 10.1.1.1 + ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \ + session_id 1042 peer_session_id 1041 + ip -netns host-2 link set dev l2tp4 up + ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1 + + # + # add routes to loopback addresses + # + ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2 + ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1 +} + +setup_l2tp_ipv6() +{ + # + # configure l2tpv3 tunnel on host-1 + # + ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \ + encap ip local 2001:db8:1::1 remote 2001:db8:2::1 + ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \ + session_id 1061 peer_session_id 1062 + ip -netns host-1 link set dev l2tp6 up + ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2 + + # + # configure l2tpv3 tunnel on host-2 + # + ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \ + encap ip local 2001:db8:2::1 remote 2001:db8:1::1 + ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \ + session_id 1062 peer_session_id 1061 + ip -netns host-2 link set dev l2tp6 up + ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1 + + # + # add routes to loopback addresses + # + ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2 + ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1 +} + +setup() +{ + # start clean + cleanup + + set -e + create_ns host-1 172.16.101.1/32 fc00:101::1/128 + create_ns host-2 172.16.101.2/32 fc00:101::2/128 + create_ns router + + connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \ + router eth1 10.1.1.2/24 2001:db8:1::2/64 + + connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \ + router eth2 10.1.2.2/24 2001:db8:2::2/64 + + ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2 + ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2 + + ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2 + ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2 + + setup_l2tp_ipv4 + setup_l2tp_ipv6 + set +e +} + +setup_ipsec() +{ + # + # IPv4 + # + run_cmd host-1 ip xfrm policy add \ + src 10.1.1.1 dst 10.1.2.1 dir out \ + tmpl proto esp mode transport + + run_cmd host-1 ip xfrm policy add \ + src 10.1.2.1 dst 10.1.1.1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip xfrm policy add \ + src 10.1.1.1 dst 10.1.2.1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip xfrm policy add \ + src 10.1.2.1 dst 10.1.1.1 dir out \ + tmpl proto esp mode transport + + ip -netns host-1 xfrm state add \ + src 10.1.1.1 dst 10.1.2.1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-1 xfrm state add \ + src 10.1.2.1 dst 10.1.1.1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 xfrm state add \ + src 10.1.1.1 dst 10.1.2.1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 xfrm state add \ + src 10.1.2.1 dst 10.1.1.1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + # + # IPV6 + # + run_cmd host-1 ip -6 xfrm policy add \ + src 2001:db8:1::1 dst 2001:db8:2::1 dir out \ + tmpl proto esp mode transport + + run_cmd host-1 ip -6 xfrm policy add \ + src 2001:db8:2::1 dst 2001:db8:1::1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip -6 xfrm policy add \ + src 2001:db8:1::1 dst 2001:db8:2::1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip -6 xfrm policy add \ + src 2001:db8:2::1 dst 2001:db8:1::1 dir out \ + tmpl proto esp mode transport + + ip -netns host-1 -6 xfrm state add \ + src 2001:db8:1::1 dst 2001:db8:2::1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-1 -6 xfrm state add \ + src 2001:db8:2::1 dst 2001:db8:1::1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 -6 xfrm state add \ + src 2001:db8:1::1 dst 2001:db8:2::1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 -6 xfrm state add \ + src 2001:db8:2::1 dst 2001:db8:1::1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport +} + +teardown_ipsec() +{ + run_cmd host-1 ip xfrm state flush + run_cmd host-1 ip xfrm policy flush + run_cmd host-2 ip xfrm state flush + run_cmd host-2 ip xfrm policy flush +} + +################################################################################ +# generate traffic through tunnel for various cases + +run_ping() +{ + local desc="$1" + + run_cmd host-1 ping -c1 -w1 172.16.1.2 + log_test $? 0 "IPv4 basic L2TP tunnel ${desc}" + + run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 + log_test $? 0 "IPv4 route through L2TP tunnel ${desc}" + + run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2 + log_test $? 0 "IPv6 basic L2TP tunnel ${desc}" + + run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 + log_test $? 0 "IPv6 route through L2TP tunnel ${desc}" +} + +run_tests() +{ + local desc + + setup + run_ping + + setup_ipsec + run_ping "- with IPsec" + run_cmd host-1 ping -c1 -w1 172.16.1.2 + log_test $? 0 "IPv4 basic L2TP tunnel ${desc}" + + run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 + log_test $? 0 "IPv4 route through L2TP tunnel ${desc}" + + run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2 + log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec" + + run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 + log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec" + + teardown_ipsec + run_ping "- after IPsec teardown" +} + +################################################################################ +# main + +declare -i nfail=0 +declare -i nsuccess=0 + +while getopts :pv o +do + case $o in + p) PAUSE_ON_FAIL=yes;; + v) VERBOSE=$(($VERBOSE + 1));; + *) exit 1;; + esac +done + +run_tests +cleanup + +printf "\nTests passed: %3d\n" ${nsuccess} +printf "Tests failed: %3d\n" ${nfail} -- cgit v1.2.3