From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/net/msg_zerocopy.sh | 122 ++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100755 tools/testing/selftests/net/msg_zerocopy.sh (limited to 'tools/testing/selftests/net/msg_zerocopy.sh') diff --git a/tools/testing/selftests/net/msg_zerocopy.sh b/tools/testing/selftests/net/msg_zerocopy.sh new file mode 100755 index 000000000..825ffec85 --- /dev/null +++ b/tools/testing/selftests/net/msg_zerocopy.sh @@ -0,0 +1,122 @@ +#!/bin/bash +# +# Send data between two processes across namespaces +# Run twice: once without and once with zerocopy + +set -e + +readonly DEV="veth0" +readonly DEV_MTU=65535 +readonly BIN="./msg_zerocopy" + +readonly RAND="$(mktemp -u XXXXXX)" +readonly NSPREFIX="ns-${RAND}" +readonly NS1="${NSPREFIX}1" +readonly NS2="${NSPREFIX}2" + +readonly SADDR4='192.168.1.1' +readonly DADDR4='192.168.1.2' +readonly SADDR6='fd::1' +readonly DADDR6='fd::2' + +readonly path_sysctl_mem="net.core.optmem_max" + +# No arguments: automated test +if [[ "$#" -eq "0" ]]; then + $0 4 tcp -t 1 + $0 6 tcp -t 1 + $0 4 udp -t 1 + $0 6 udp -t 1 + echo "OK. All tests passed" + exit 0 +fi + +# Argument parsing +if [[ "$#" -lt "2" ]]; then + echo "Usage: $0 [4|6] [tcp|udp|raw|raw_hdrincl|packet|packet_dgram] " + exit 1 +fi + +readonly IP="$1" +shift +readonly TXMODE="$1" +shift +readonly EXTRA_ARGS="$@" + +# Argument parsing: configure addresses +if [[ "${IP}" == "4" ]]; then + readonly SADDR="${SADDR4}" + readonly DADDR="${DADDR4}" +elif [[ "${IP}" == "6" ]]; then + readonly SADDR="${SADDR6}" + readonly DADDR="${DADDR6}" +else + echo "Invalid IP version ${IP}" + exit 1 +fi + +# Argument parsing: select receive mode +# +# This differs from send mode for +# - packet: use raw recv, because packet receives skb clones +# - raw_hdrinc: use raw recv, because hdrincl is a tx-only option +case "${TXMODE}" in +'packet' | 'packet_dgram' | 'raw_hdrincl') + RXMODE='raw' + ;; +*) + RXMODE="${TXMODE}" + ;; +esac + +# Start of state changes: install cleanup handler +save_sysctl_mem="$(sysctl -n ${path_sysctl_mem})" + +cleanup() { + ip netns del "${NS2}" + ip netns del "${NS1}" + sysctl -w -q "${path_sysctl_mem}=${save_sysctl_mem}" +} + +trap cleanup EXIT + +# Configure system settings +sysctl -w -q "${path_sysctl_mem}=1000000" + +# Create virtual ethernet pair between network namespaces +ip netns add "${NS1}" +ip netns add "${NS2}" + +ip link add "${DEV}" mtu "${DEV_MTU}" netns "${NS1}" type veth \ + peer name "${DEV}" mtu "${DEV_MTU}" netns "${NS2}" + +# Bring the devices up +ip -netns "${NS1}" link set "${DEV}" up +ip -netns "${NS2}" link set "${DEV}" up + +# Set fixed MAC addresses on the devices +ip -netns "${NS1}" link set dev "${DEV}" address 02:02:02:02:02:02 +ip -netns "${NS2}" link set dev "${DEV}" address 06:06:06:06:06:06 + +# Add fixed IP addresses to the devices +ip -netns "${NS1}" addr add 192.168.1.1/24 dev "${DEV}" +ip -netns "${NS2}" addr add 192.168.1.2/24 dev "${DEV}" +ip -netns "${NS1}" addr add fd::1/64 dev "${DEV}" nodad +ip -netns "${NS2}" addr add fd::2/64 dev "${DEV}" nodad + +# Optionally disable sg or csum offload to test edge cases +# ip netns exec "${NS1}" ethtool -K "${DEV}" sg off + +do_test() { + local readonly ARGS="$1" + + echo "ipv${IP} ${TXMODE} ${ARGS}" + ip netns exec "${NS2}" "${BIN}" "-${IP}" -i "${DEV}" -t 2 -C 2 -S "${SADDR}" -D "${DADDR}" ${ARGS} -r "${RXMODE}" & + sleep 0.2 + ip netns exec "${NS1}" "${BIN}" "-${IP}" -i "${DEV}" -t 1 -C 3 -S "${SADDR}" -D "${DADDR}" ${ARGS} "${TXMODE}" + wait +} + +do_test "${EXTRA_ARGS}" +do_test "-z ${EXTRA_ARGS}" +echo ok -- cgit v1.2.3