From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/net/ndisc_unsolicited_na_test.sh | 254 +++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100755 tools/testing/selftests/net/ndisc_unsolicited_na_test.sh (limited to 'tools/testing/selftests/net/ndisc_unsolicited_na_test.sh') diff --git a/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh b/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh new file mode 100755 index 000000000..86e621b7b --- /dev/null +++ b/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh @@ -0,0 +1,254 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for the accept_untracked_na feature to +# enable RFC9131 behaviour. The following is the test-matrix. +# drop accept fwding behaviour +# ---- ------ ------ ---------------------------------------------- +# 1 X X Don't update NC +# 0 0 X Don't update NC +# 0 1 0 Don't update NC +# 0 1 1 Add a STALE NC entry + +ret=0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +PAUSE_ON_FAIL=no +PAUSE=no + +HOST_NS="ns-host" +ROUTER_NS="ns-router" + +HOST_INTF="veth-host" +ROUTER_INTF="veth-router" + +ROUTER_ADDR="2000:20::1" +HOST_ADDR="2000:20::2" +SUBNET_WIDTH=64 +ROUTER_ADDR_WITH_MASK="${ROUTER_ADDR}/${SUBNET_WIDTH}" +HOST_ADDR_WITH_MASK="${HOST_ADDR}/${SUBNET_WIDTH}" + +IP_HOST="ip -6 -netns ${HOST_NS}" +IP_HOST_EXEC="ip netns exec ${HOST_NS}" +IP_ROUTER="ip -6 -netns ${ROUTER_NS}" +IP_ROUTER_EXEC="ip netns exec ${ROUTER_NS}" + +tcpdump_stdout= +tcpdump_stderr= + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf " TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf " TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi + + if [ "${PAUSE}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi +} + +setup() +{ + set -e + + local drop_unsolicited_na=$1 + local accept_untracked_na=$2 + local forwarding=$3 + + # Setup two namespaces and a veth tunnel across them. + # On end of the tunnel is a router and the other end is a host. + ip netns add ${HOST_NS} + ip netns add ${ROUTER_NS} + ${IP_ROUTER} link add ${ROUTER_INTF} type veth \ + peer name ${HOST_INTF} netns ${HOST_NS} + + # Enable IPv6 on both router and host, and configure static addresses. + # The router here is the DUT + # Setup router configuration as specified by the arguments. + # forwarding=0 case is to check that a non-router + # doesn't add neighbour entries. + ROUTER_CONF=net.ipv6.conf.${ROUTER_INTF} + ${IP_ROUTER_EXEC} sysctl -qw \ + ${ROUTER_CONF}.forwarding=${forwarding} + ${IP_ROUTER_EXEC} sysctl -qw \ + ${ROUTER_CONF}.drop_unsolicited_na=${drop_unsolicited_na} + ${IP_ROUTER_EXEC} sysctl -qw \ + ${ROUTER_CONF}.accept_untracked_na=${accept_untracked_na} + ${IP_ROUTER_EXEC} sysctl -qw ${ROUTER_CONF}.disable_ipv6=0 + ${IP_ROUTER} addr add ${ROUTER_ADDR_WITH_MASK} dev ${ROUTER_INTF} + + # Turn on ndisc_notify on host interface so that + # the host sends unsolicited NAs. + HOST_CONF=net.ipv6.conf.${HOST_INTF} + ${IP_HOST_EXEC} sysctl -qw ${HOST_CONF}.ndisc_notify=1 + ${IP_HOST_EXEC} sysctl -qw ${HOST_CONF}.disable_ipv6=0 + ${IP_HOST} addr add ${HOST_ADDR_WITH_MASK} dev ${HOST_INTF} + + set +e +} + +start_tcpdump() { + set -e + tcpdump_stdout=`mktemp` + tcpdump_stderr=`mktemp` + ${IP_ROUTER_EXEC} timeout 15s \ + tcpdump --immediate-mode -tpni ${ROUTER_INTF} -c 1 \ + "icmp6 && icmp6[0] == 136 && src ${HOST_ADDR}" \ + > ${tcpdump_stdout} 2> /dev/null + set +e +} + +cleanup_tcpdump() +{ + set -e + [[ ! -z ${tcpdump_stdout} ]] && rm -f ${tcpdump_stdout} + [[ ! -z ${tcpdump_stderr} ]] && rm -f ${tcpdump_stderr} + tcpdump_stdout= + tcpdump_stderr= + set +e +} + +cleanup() +{ + cleanup_tcpdump + ip netns del ${HOST_NS} + ip netns del ${ROUTER_NS} +} + +link_up() { + set -e + ${IP_ROUTER} link set dev ${ROUTER_INTF} up + ${IP_HOST} link set dev ${HOST_INTF} up + set +e +} + +verify_ndisc() { + local drop_unsolicited_na=$1 + local accept_untracked_na=$2 + local forwarding=$3 + + neigh_show_output=$(${IP_ROUTER} neigh show \ + to ${HOST_ADDR} dev ${ROUTER_INTF} nud stale) + if [ ${drop_unsolicited_na} -eq 0 ] && \ + [ ${accept_untracked_na} -eq 1 ] && \ + [ ${forwarding} -eq 1 ]; then + # Neighbour entry expected to be present for 011 case + [[ ${neigh_show_output} ]] + else + # Neighbour entry expected to be absent for all other cases + [[ -z ${neigh_show_output} ]] + fi +} + +test_unsolicited_na_common() +{ + # Setup the test bed, but keep links down + setup $1 $2 $3 + + # Bring the link up, wait for the NA, + # and add a delay to ensure neighbour processing is done. + link_up + start_tcpdump + + # Verify the neighbour table + verify_ndisc $1 $2 $3 + +} + +test_unsolicited_na_combination() { + test_unsolicited_na_common $1 $2 $3 + test_msg=("test_unsolicited_na: " + "drop_unsolicited_na=$1 " + "accept_untracked_na=$2 " + "forwarding=$3") + log_test $? 0 "${test_msg[*]}" + cleanup +} + +test_unsolicited_na_combinations() { + # Args: drop_unsolicited_na accept_untracked_na forwarding + + # Expect entry + test_unsolicited_na_combination 0 1 1 + + # Expect no entry + test_unsolicited_na_combination 0 0 0 + test_unsolicited_na_combination 0 0 1 + test_unsolicited_na_combination 0 1 0 + test_unsolicited_na_combination 1 0 0 + test_unsolicited_na_combination 1 0 1 + test_unsolicited_na_combination 1 1 0 + test_unsolicited_na_combination 1 1 1 +} + +############################################################################### +# usage + +usage() +{ + cat < /dev/null + +test_unsolicited_na_combinations + +printf "\nTests passed: %3d\n" ${nsuccess} +printf "Tests failed: %3d\n" ${nfail} + +exit $ret -- cgit v1.2.3