From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/powerpc/switch_endian/.gitignore | 3 + .../selftests/powerpc/switch_endian/Makefile | 18 ++++ .../selftests/powerpc/switch_endian/check.S | 101 +++++++++++++++++++++ .../selftests/powerpc/switch_endian/common.h | 7 ++ .../powerpc/switch_endian/switch_endian_test.S | 97 ++++++++++++++++++++ 5 files changed, 226 insertions(+) create mode 100644 tools/testing/selftests/powerpc/switch_endian/.gitignore create mode 100644 tools/testing/selftests/powerpc/switch_endian/Makefile create mode 100644 tools/testing/selftests/powerpc/switch_endian/check.S create mode 100644 tools/testing/selftests/powerpc/switch_endian/common.h create mode 100644 tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S (limited to 'tools/testing/selftests/powerpc/switch_endian') diff --git a/tools/testing/selftests/powerpc/switch_endian/.gitignore b/tools/testing/selftests/powerpc/switch_endian/.gitignore new file mode 100644 index 000000000..30e962cf8 --- /dev/null +++ b/tools/testing/selftests/powerpc/switch_endian/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +switch_endian_test +check-reversed.S diff --git a/tools/testing/selftests/powerpc/switch_endian/Makefile b/tools/testing/selftests/powerpc/switch_endian/Makefile new file mode 100644 index 000000000..bdc081afe --- /dev/null +++ b/tools/testing/selftests/powerpc/switch_endian/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +TEST_GEN_PROGS := switch_endian_test + +ASFLAGS += -O2 -Wall -g -nostdlib -m64 + +EXTRA_CLEAN = $(OUTPUT)/*.o $(OUTPUT)/check-reversed.S + +top_srcdir = ../../../../.. +include ../../lib.mk + +$(OUTPUT)/switch_endian_test: ASFLAGS += -I $(OUTPUT) +$(OUTPUT)/switch_endian_test: $(OUTPUT)/check-reversed.S + +$(OUTPUT)/check-reversed.o: $(OUTPUT)/check.o + $(CROSS_COMPILE)objcopy -j .text --reverse-bytes=4 -O binary $< $@ + +$(OUTPUT)/check-reversed.S: $(OUTPUT)/check-reversed.o + hexdump -v -e '/1 ".byte 0x%02X\n"' $< > $@ diff --git a/tools/testing/selftests/powerpc/switch_endian/check.S b/tools/testing/selftests/powerpc/switch_endian/check.S new file mode 100644 index 000000000..927a5c675 --- /dev/null +++ b/tools/testing/selftests/powerpc/switch_endian/check.S @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include "common.h" + +/* + * Checks that registers contain what we expect, ie. they were not clobbered by + * the syscall. + * + * r15: pattern to check registers against. + * + * At the end r3 == 0 if everything's OK. + */ + nop # guaranteed to be illegal in reverse-endian + mr r9,r15 + cmpd r9,r3 # check r3 + bne 1f + addi r9,r15,4 # check r4 + cmpd r9,r4 + bne 1f + lis r9,0x00FF # check CR + ori r9,r9,0xF000 + mfcr r10 + and r10,r10,r9 + cmpw r9,r10 + addi r9,r15,34 + bne 1f + addi r9,r15,32 # check LR + mflr r10 + cmpd r9,r10 + bne 1f + addi r9,r15,5 # check r5 + cmpd r9,r5 + bne 1f + addi r9,r15,6 # check r6 + cmpd r9,r6 + bne 1f + addi r9,r15,7 # check r7 + cmpd r9,r7 + bne 1f + addi r9,r15,8 # check r8 + cmpd r9,r8 + bne 1f + addi r9,r15,13 # check r13 + cmpd r9,r13 + bne 1f + addi r9,r15,14 # check r14 + cmpd r9,r14 + bne 1f + addi r9,r15,16 # check r16 + cmpd r9,r16 + bne 1f + addi r9,r15,17 # check r17 + cmpd r9,r17 + bne 1f + addi r9,r15,18 # check r18 + cmpd r9,r18 + bne 1f + addi r9,r15,19 # check r19 + cmpd r9,r19 + bne 1f + addi r9,r15,20 # check r20 + cmpd r9,r20 + bne 1f + addi r9,r15,21 # check r21 + cmpd r9,r21 + bne 1f + addi r9,r15,22 # check r22 + cmpd r9,r22 + bne 1f + addi r9,r15,23 # check r23 + cmpd r9,r23 + bne 1f + addi r9,r15,24 # check r24 + cmpd r9,r24 + bne 1f + addi r9,r15,25 # check r25 + cmpd r9,r25 + bne 1f + addi r9,r15,26 # check r26 + cmpd r9,r26 + bne 1f + addi r9,r15,27 # check r27 + cmpd r9,r27 + bne 1f + addi r9,r15,28 # check r28 + cmpd r9,r28 + bne 1f + addi r9,r15,29 # check r29 + cmpd r9,r29 + bne 1f + addi r9,r15,30 # check r30 + cmpd r9,r30 + bne 1f + addi r9,r15,31 # check r31 + cmpd r9,r31 + bne 1f + b 2f +1: mr r3, r9 + li r0, __NR_exit + sc +2: li r0, __NR_switch_endian + nop diff --git a/tools/testing/selftests/powerpc/switch_endian/common.h b/tools/testing/selftests/powerpc/switch_endian/common.h new file mode 100644 index 000000000..1434cbc2a --- /dev/null +++ b/tools/testing/selftests/powerpc/switch_endian/common.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include +#include + +#ifndef __NR_switch_endian +#define __NR_switch_endian 363 +#endif diff --git a/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S b/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S new file mode 100644 index 000000000..7887f78cf --- /dev/null +++ b/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include "common.h" + + .data + .balign 8 +success_message: + .ascii "success: switch_endian_test\n\0" + + .balign 8 +failure_message: + .ascii "failure: switch_endian_test\n\0" + + .section ".toc" + .balign 8 +pattern: + .8byte 0x5555AAAA5555AAAA + + .text +FUNC_START(_start) + /* Load the pattern */ + ld r15, pattern@TOC(%r2) + + /* Setup CR, only CR2-CR4 are maintained */ + lis r3, 0x00FF + ori r3, r3, 0xF000 + mtcr r3 + + /* Load the pattern slightly modified into the registers */ + mr r3, r15 + addi r4, r15, 4 + + addi r5, r15, 32 + mtlr r5 + + addi r5, r15, 5 + addi r6, r15, 6 + addi r7, r15, 7 + addi r8, r15, 8 + + /* r9 - r12 are clobbered */ + + addi r13, r15, 13 + addi r14, r15, 14 + + /* Skip r15 we're using it */ + + addi r16, r15, 16 + addi r17, r15, 17 + addi r18, r15, 18 + addi r19, r15, 19 + addi r20, r15, 20 + addi r21, r15, 21 + addi r22, r15, 22 + addi r23, r15, 23 + addi r24, r15, 24 + addi r25, r15, 25 + addi r26, r15, 26 + addi r27, r15, 27 + addi r28, r15, 28 + addi r29, r15, 29 + addi r30, r15, 30 + addi r31, r15, 31 + + /* + * Call the syscall to switch endian. + * It clobbers r9-r12, XER, CTR and CR0-1,5-7. + */ + li r0, __NR_switch_endian + sc + + tdi 0, 0, 0x48 // b +8 if the endian was switched + b .Lfail // exit if endian didn't switch + +#include "check-reversed.S" + + /* Flip back, r0 already has the switch syscall number */ + .long 0x02000044 /* sc */ + +#include "check.S" + + ld r4, success_message@got(%r2) + li r5, 28 // strlen(success_message) + li r14, 0 // exit status +.Lout: + li r0, __NR_write + li r3, 1 /* stdout */ + sc + li r0, __NR_exit + mr r3, r14 + sc + b . + +.Lfail: + ld r4, failure_message@got(%r2) + li r5, 28 // strlen(failure_message) + li r14, 1 + b .Lout -- cgit v1.2.3