From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/pstore/.gitignore | 3 + tools/testing/selftests/pstore/Makefile | 14 ++++ tools/testing/selftests/pstore/common_tests | 83 ++++++++++++++++++++++ tools/testing/selftests/pstore/config | 5 ++ tools/testing/selftests/pstore/pstore_crash_test | 30 ++++++++ .../selftests/pstore/pstore_post_reboot_tests | 80 +++++++++++++++++++++ tools/testing/selftests/pstore/pstore_tests | 30 ++++++++ 7 files changed, 245 insertions(+) create mode 100644 tools/testing/selftests/pstore/.gitignore create mode 100644 tools/testing/selftests/pstore/Makefile create mode 100755 tools/testing/selftests/pstore/common_tests create mode 100644 tools/testing/selftests/pstore/config create mode 100755 tools/testing/selftests/pstore/pstore_crash_test create mode 100755 tools/testing/selftests/pstore/pstore_post_reboot_tests create mode 100755 tools/testing/selftests/pstore/pstore_tests (limited to 'tools/testing/selftests/pstore') diff --git a/tools/testing/selftests/pstore/.gitignore b/tools/testing/selftests/pstore/.gitignore new file mode 100644 index 000000000..9938fb406 --- /dev/null +++ b/tools/testing/selftests/pstore/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +logs +*uuid diff --git a/tools/testing/selftests/pstore/Makefile b/tools/testing/selftests/pstore/Makefile new file mode 100644 index 000000000..5ef57855a --- /dev/null +++ b/tools/testing/selftests/pstore/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for pstore selftests. +# Expects pstore backend is registered. + +all: + +TEST_PROGS := pstore_tests pstore_post_reboot_tests +TEST_FILES := common_tests pstore_crash_test +EXTRA_CLEAN := logs/* *uuid + +include ../lib.mk + +run_crash: + @sh pstore_crash_test || { echo "pstore_crash_test: [FAIL]"; exit 1; } diff --git a/tools/testing/selftests/pstore/common_tests b/tools/testing/selftests/pstore/common_tests new file mode 100755 index 000000000..4509f0cc9 --- /dev/null +++ b/tools/testing/selftests/pstore/common_tests @@ -0,0 +1,83 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +# common_tests - Shell script commonly used by pstore test scripts +# +# Copyright (C) Hitachi Ltd., 2015 +# Written by Hiraku Toyooka +# + +# Utilities +errexit() { # message + echo "Error: $1" 1>&2 + exit 1 +} + +absdir() { # file_path + (cd `dirname $1`; pwd) +} + +show_result() { # result_value + if [ $1 -eq 0 ]; then + prlog "ok" + else + prlog "FAIL" + rc=1 + fi +} + +check_files_exist() { # type of pstorefs file + if [ -e ${1}-${backend}-0 ]; then + prlog "ok" + for f in `ls ${1}-${backend}-*`; do + prlog -e "\t${f}" + done + else + prlog "FAIL" + rc=1 + fi +} + +operate_files() { # tested value, files, operation + if [ $1 -eq 0 ]; then + prlog + for f in $2; do + prlog -ne "\t${f} ... " + # execute operation + $3 $f + show_result $? + done + else + prlog " ... FAIL" + rc=1 + fi +} + +# Parameters +TEST_STRING_PATTERN="Testing pstore: uuid=" +UUID=`cat /proc/sys/kernel/random/uuid` +TOP_DIR=`absdir $0` +LOG_DIR=$TOP_DIR/logs/`date +%Y%m%d-%H%M%S`_${UUID}/ +REBOOT_FLAG=$TOP_DIR/reboot_flag + +# Preparing logs +LOG_FILE=$LOG_DIR/`basename $0`.log +mkdir -p $LOG_DIR || errexit "Failed to make a log directory: $LOG_DIR" +date > $LOG_FILE +prlog() { # messages + /bin/echo "$@" | tee -a $LOG_FILE +} + +# Starting tests +rc=0 +prlog "=== Pstore unit tests (`basename $0`) ===" +prlog "UUID="$UUID + +prlog -n "Checking pstore backend is registered ... " +backend=`cat /sys/module/pstore/parameters/backend` +show_result $? +prlog -e "\tbackend=${backend}" +prlog -e "\tcmdline=`cat /proc/cmdline`" +if [ $rc -ne 0 ]; then + exit 1 +fi diff --git a/tools/testing/selftests/pstore/config b/tools/testing/selftests/pstore/config new file mode 100644 index 000000000..d148f9f89 --- /dev/null +++ b/tools/testing/selftests/pstore/config @@ -0,0 +1,5 @@ +CONFIG_MISC_FILESYSTEMS=y +CONFIG_PSTORE=y +CONFIG_PSTORE_PMSG=y +CONFIG_PSTORE_CONSOLE=y +CONFIG_PSTORE_RAM=m diff --git a/tools/testing/selftests/pstore/pstore_crash_test b/tools/testing/selftests/pstore/pstore_crash_test new file mode 100755 index 000000000..2a329bbb4 --- /dev/null +++ b/tools/testing/selftests/pstore/pstore_crash_test @@ -0,0 +1,30 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +# pstore_crash_test - Pstore test shell script which causes crash and reboot +# +# Copyright (C) Hitachi Ltd., 2015 +# Written by Hiraku Toyooka +# + +# exit if pstore backend is not registered +. ./common_tests + +prlog "Causing kernel crash ..." + +# enable all functions triggered by sysrq +echo 1 > /proc/sys/kernel/sysrq +# setting to reboot in 3 seconds after panic +echo 3 > /proc/sys/kernel/panic + +# save uuid file by different name because next test execution will replace it. +mv $TOP_DIR/uuid $TOP_DIR/prev_uuid + +# create a file as reboot flag +touch $REBOOT_FLAG +sync + +# cause crash +# Note: If you use kdump and want to see kmesg-* files after reboot, you should +# specify 'crash_kexec_post_notifiers' in 1st kernel's cmdline. +echo c > /proc/sysrq-trigger diff --git a/tools/testing/selftests/pstore/pstore_post_reboot_tests b/tools/testing/selftests/pstore/pstore_post_reboot_tests new file mode 100755 index 000000000..d6da5e86e --- /dev/null +++ b/tools/testing/selftests/pstore/pstore_post_reboot_tests @@ -0,0 +1,80 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +# pstore_post_reboot_tests - Check pstore's behavior after crash/reboot +# +# Copyright (C) Hitachi Ltd., 2015 +# Written by Hiraku Toyooka +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +. ./common_tests + +if [ -e $REBOOT_FLAG ]; then + rm $REBOOT_FLAG +else + prlog "pstore_crash_test has not been executed yet. we skip further tests." + exit $ksft_skip +fi + +prlog -n "Mounting pstore filesystem ... " +mount_info=`grep pstore /proc/mounts` +if [ $? -eq 0 ]; then + mount_point=`echo ${mount_info} | cut -d' ' -f2 | head -n1` + prlog "ok" +else + mount none /sys/fs/pstore -t pstore + if [ $? -eq 0 ]; then + mount_point=`grep pstore /proc/mounts | cut -d' ' -f2 | head -n1` + prlog "ok" + else + prlog "FAIL" + exit 1 + fi +fi + +cd ${mount_point} + +prlog -n "Checking dmesg files exist in pstore filesystem ... " +check_files_exist dmesg + +prlog -n "Checking console files exist in pstore filesystem ... " +check_files_exist console + +prlog -n "Checking pmsg files exist in pstore filesystem ... " +check_files_exist pmsg + +prlog -n "Checking dmesg files contain oops end marker" +grep_end_trace() { + grep -q "\---\[ end trace" $1 +} +files=`ls dmesg-${backend}-*` +operate_files $? "$files" grep_end_trace + +prlog -n "Checking console file contains oops end marker ... " +grep -q "\---\[ end trace" console-${backend}-0 +show_result $? + +prlog -n "Checking pmsg file properly keeps the content written before crash ... " +prev_uuid=`cat $TOP_DIR/prev_uuid` +if [ $? -eq 0 ]; then + nr_matched=`grep -c "$TEST_STRING_PATTERN" pmsg-${backend}-0` + if [ $nr_matched -eq 1 ]; then + grep -q "$TEST_STRING_PATTERN"$prev_uuid pmsg-${backend}-0 + show_result $? + else + prlog "FAIL" + rc=1 + fi +else + prlog "FAIL" + rc=1 +fi + +prlog -n "Removing all files in pstore filesystem " +files=`ls *-${backend}-*` +operate_files $? "$files" rm + +exit $rc diff --git a/tools/testing/selftests/pstore/pstore_tests b/tools/testing/selftests/pstore/pstore_tests new file mode 100755 index 000000000..2aa9a3852 --- /dev/null +++ b/tools/testing/selftests/pstore/pstore_tests @@ -0,0 +1,30 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +# pstore_tests - Check pstore's behavior before crash/reboot +# +# Copyright (C) Hitachi Ltd., 2015 +# Written by Hiraku Toyooka +# + +. ./common_tests + +prlog -n "Checking pstore console is registered ... " +dmesg | grep -Eq "console \[(pstore|${backend})" +show_result $? + +prlog -n "Checking /dev/pmsg0 exists ... " +test -e /dev/pmsg0 +show_result $? + +prlog -n "Writing unique string to /dev/pmsg0 ... " +if [ -e "/dev/pmsg0" ]; then + echo "${TEST_STRING_PATTERN}""$UUID" > /dev/pmsg0 + show_result $? + echo "$UUID" > $TOP_DIR/uuid +else + prlog "FAIL" + rc=1 +fi + +exit $rc -- cgit v1.2.3