From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../selftests/syscall_user_dispatch/.gitignore | 3 + .../selftests/syscall_user_dispatch/Makefile | 9 + .../testing/selftests/syscall_user_dispatch/config | 1 + .../syscall_user_dispatch/sud_benchmark.c | 202 +++++++++++++ .../selftests/syscall_user_dispatch/sud_test.c | 312 +++++++++++++++++++++ 5 files changed, 527 insertions(+) create mode 100644 tools/testing/selftests/syscall_user_dispatch/.gitignore create mode 100644 tools/testing/selftests/syscall_user_dispatch/Makefile create mode 100644 tools/testing/selftests/syscall_user_dispatch/config create mode 100644 tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c create mode 100644 tools/testing/selftests/syscall_user_dispatch/sud_test.c (limited to 'tools/testing/selftests/syscall_user_dispatch') diff --git a/tools/testing/selftests/syscall_user_dispatch/.gitignore b/tools/testing/selftests/syscall_user_dispatch/.gitignore new file mode 100644 index 000000000..f539615ad --- /dev/null +++ b/tools/testing/selftests/syscall_user_dispatch/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +sud_test +sud_benchmark diff --git a/tools/testing/selftests/syscall_user_dispatch/Makefile b/tools/testing/selftests/syscall_user_dispatch/Makefile new file mode 100644 index 000000000..03c120270 --- /dev/null +++ b/tools/testing/selftests/syscall_user_dispatch/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +top_srcdir = ../../../.. +INSTALL_HDR_PATH = $(top_srcdir)/usr +LINUX_HDR_PATH = $(INSTALL_HDR_PATH)/include/ + +CFLAGS += -Wall -I$(LINUX_HDR_PATH) + +TEST_GEN_PROGS := sud_test sud_benchmark +include ../lib.mk diff --git a/tools/testing/selftests/syscall_user_dispatch/config b/tools/testing/selftests/syscall_user_dispatch/config new file mode 100644 index 000000000..039e303e5 --- /dev/null +++ b/tools/testing/selftests/syscall_user_dispatch/config @@ -0,0 +1 @@ +CONFIG_GENERIC_ENTRY=y diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c b/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c new file mode 100644 index 000000000..073a03702 --- /dev/null +++ b/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Collabora Ltd. + * + * Benchmark and test syscall user dispatch + */ + +#define _GNU_SOURCE +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifndef PR_SET_SYSCALL_USER_DISPATCH +# define PR_SET_SYSCALL_USER_DISPATCH 59 +# define PR_SYS_DISPATCH_OFF 0 +# define PR_SYS_DISPATCH_ON 1 +# define SYSCALL_DISPATCH_FILTER_ALLOW 0 +# define SYSCALL_DISPATCH_FILTER_BLOCK 1 +#endif + +#ifdef __NR_syscalls +# define MAGIC_SYSCALL_1 (__NR_syscalls + 1) /* Bad Linux syscall number */ +#else +# define MAGIC_SYSCALL_1 (0xff00) /* Bad Linux syscall number */ +#endif + +/* + * To test returning from a sigsys with selector blocked, the test + * requires some per-architecture support (i.e. knowledge about the + * signal trampoline address). On i386, we know it is on the vdso, and + * a small trampoline is open-coded for x86_64. Other architectures + * that have a trampoline in the vdso will support TEST_BLOCKED_RETURN + * out of the box, but don't enable them until they support syscall user + * dispatch. + */ +#if defined(__x86_64__) || defined(__i386__) +#define TEST_BLOCKED_RETURN +#endif + +#ifdef __x86_64__ +void* (syscall_dispatcher_start)(void); +void* (syscall_dispatcher_end)(void); +#else +unsigned long syscall_dispatcher_start = 0; +unsigned long syscall_dispatcher_end = 0; +#endif + +unsigned long trapped_call_count = 0; +unsigned long native_call_count = 0; + +char selector; +#define SYSCALL_BLOCK (selector = SYSCALL_DISPATCH_FILTER_BLOCK) +#define SYSCALL_UNBLOCK (selector = SYSCALL_DISPATCH_FILTER_ALLOW) + +#define CALIBRATION_STEP 100000 +#define CALIBRATE_TO_SECS 5 +int factor; + +static double one_sysinfo_step(void) +{ + struct timespec t1, t2; + int i; + struct sysinfo info; + + clock_gettime(CLOCK_MONOTONIC, &t1); + for (i = 0; i < CALIBRATION_STEP; i++) + sysinfo(&info); + clock_gettime(CLOCK_MONOTONIC, &t2); + return (t2.tv_sec - t1.tv_sec) + 1.0e-9 * (t2.tv_nsec - t1.tv_nsec); +} + +static void calibrate_set(void) +{ + double elapsed = 0; + + printf("Calibrating test set to last ~%d seconds...\n", CALIBRATE_TO_SECS); + + while (elapsed < 1) { + elapsed += one_sysinfo_step(); + factor += CALIBRATE_TO_SECS; + } + + printf("test iterations = %d\n", CALIBRATION_STEP * factor); +} + +static double perf_syscall(void) +{ + unsigned int i; + double partial = 0; + + for (i = 0; i < factor; ++i) + partial += one_sysinfo_step()/(CALIBRATION_STEP*factor); + return partial; +} + +static void handle_sigsys(int sig, siginfo_t *info, void *ucontext) +{ + char buf[1024]; + int len; + + SYSCALL_UNBLOCK; + + /* printf and friends are not signal-safe. */ + len = snprintf(buf, 1024, "Caught sys_%x\n", info->si_syscall); + write(1, buf, len); + + if (info->si_syscall == MAGIC_SYSCALL_1) + trapped_call_count++; + else + native_call_count++; + +#ifdef TEST_BLOCKED_RETURN + SYSCALL_BLOCK; +#endif + +#ifdef __x86_64__ + __asm__ volatile("movq $0xf, %rax"); + __asm__ volatile("leaveq"); + __asm__ volatile("add $0x8, %rsp"); + __asm__ volatile("syscall_dispatcher_start:"); + __asm__ volatile("syscall"); + __asm__ volatile("nop"); /* Landing pad within dispatcher area */ + __asm__ volatile("syscall_dispatcher_end:"); +#endif + +} + +int main(void) +{ + struct sigaction act; + double time1, time2; + int ret; + sigset_t mask; + + memset(&act, 0, sizeof(act)); + sigemptyset(&mask); + + act.sa_sigaction = handle_sigsys; + act.sa_flags = SA_SIGINFO; + act.sa_mask = mask; + + calibrate_set(); + + time1 = perf_syscall(); + printf("Avg syscall time %.0lfns.\n", time1 * 1.0e9); + + ret = sigaction(SIGSYS, &act, NULL); + if (ret) { + perror("Error sigaction:"); + exit(-1); + } + + fprintf(stderr, "Enabling syscall trapping.\n"); + + if (prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, + syscall_dispatcher_start, + (syscall_dispatcher_end - syscall_dispatcher_start + 1), + &selector)) { + perror("prctl failed\n"); + exit(-1); + } + + SYSCALL_BLOCK; + syscall(MAGIC_SYSCALL_1); + +#ifdef TEST_BLOCKED_RETURN + if (selector == SYSCALL_DISPATCH_FILTER_ALLOW) { + fprintf(stderr, "Failed to return with selector blocked.\n"); + exit(-1); + } +#endif + + SYSCALL_UNBLOCK; + + if (!trapped_call_count) { + fprintf(stderr, "syscall trapping does not work.\n"); + exit(-1); + } + + time2 = perf_syscall(); + + if (native_call_count) { + perror("syscall trapping intercepted more syscalls than expected\n"); + exit(-1); + } + + printf("trapped_call_count %lu, native_call_count %lu.\n", + trapped_call_count, native_call_count); + printf("Avg syscall time %.0lfns.\n", time2 * 1.0e9); + printf("Interception overhead: %.1lf%% (+%.0lfns).\n", + 100.0 * (time2 / time1 - 1.0), 1.0e9 * (time2 - time1)); + return 0; + +} diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c new file mode 100644 index 000000000..b5d592d40 --- /dev/null +++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Collabora Ltd. + * + * Test code for syscall user dispatch + */ + +#define _GNU_SOURCE +#include +#include +#include +#include + +#include +#include "../kselftest_harness.h" + +#ifndef PR_SET_SYSCALL_USER_DISPATCH +# define PR_SET_SYSCALL_USER_DISPATCH 59 +# define PR_SYS_DISPATCH_OFF 0 +# define PR_SYS_DISPATCH_ON 1 +# define SYSCALL_DISPATCH_FILTER_ALLOW 0 +# define SYSCALL_DISPATCH_FILTER_BLOCK 1 +#endif + +#ifndef SYS_USER_DISPATCH +# define SYS_USER_DISPATCH 2 +#endif + +#ifdef __NR_syscalls +# define MAGIC_SYSCALL_1 (__NR_syscalls + 1) /* Bad Linux syscall number */ +#else +# define MAGIC_SYSCALL_1 (0xff00) /* Bad Linux syscall number */ +#endif + +#define SYSCALL_DISPATCH_ON(x) ((x) = SYSCALL_DISPATCH_FILTER_BLOCK) +#define SYSCALL_DISPATCH_OFF(x) ((x) = SYSCALL_DISPATCH_FILTER_ALLOW) + +/* Test Summary: + * + * - dispatch_trigger_sigsys: Verify if PR_SET_SYSCALL_USER_DISPATCH is + * able to trigger SIGSYS on a syscall. + * + * - bad_selector: Test that a bad selector value triggers SIGSYS with + * si_errno EINVAL. + * + * - bad_prctl_param: Test that the API correctly rejects invalid + * parameters on prctl + * + * - dispatch_and_return: Test that a syscall is selectively dispatched + * to userspace depending on the value of selector. + * + * - disable_dispatch: Test that the PR_SYS_DISPATCH_OFF correctly + * disables the dispatcher + * + * - direct_dispatch_range: Test that a syscall within the allowed range + * can bypass the dispatcher. + */ + +TEST_SIGNAL(dispatch_trigger_sigsys, SIGSYS) +{ + char sel = SYSCALL_DISPATCH_FILTER_ALLOW; + struct sysinfo info; + int ret; + + ret = sysinfo(&info); + ASSERT_EQ(0, ret); + + ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &sel); + ASSERT_EQ(0, ret) { + TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH"); + } + + SYSCALL_DISPATCH_ON(sel); + + sysinfo(&info); + + EXPECT_FALSE(true) { + TH_LOG("Unreachable!"); + } +} + +TEST(bad_prctl_param) +{ + char sel = SYSCALL_DISPATCH_FILTER_ALLOW; + int op; + + /* Invalid op */ + op = -1; + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0, 0, &sel); + ASSERT_EQ(EINVAL, errno); + + /* PR_SYS_DISPATCH_OFF */ + op = PR_SYS_DISPATCH_OFF; + + /* offset != 0 */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x1, 0x0, 0); + EXPECT_EQ(EINVAL, errno); + + /* len != 0 */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0xff, 0); + EXPECT_EQ(EINVAL, errno); + + /* sel != NULL */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x0, &sel); + EXPECT_EQ(EINVAL, errno); + + /* Valid parameter */ + errno = 0; + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x0, 0x0); + EXPECT_EQ(0, errno); + + /* PR_SYS_DISPATCH_ON */ + op = PR_SYS_DISPATCH_ON; + + /* Dispatcher region is bad (offset > 0 && len == 0) */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x1, 0x0, &sel); + EXPECT_EQ(EINVAL, errno); + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, -1L, 0x0, &sel); + EXPECT_EQ(EINVAL, errno); + + /* Invalid selector */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x1, (void *) -1); + ASSERT_EQ(EFAULT, errno); + + /* + * Dispatcher range overflows unsigned long + */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 1, -1L, &sel); + ASSERT_EQ(EINVAL, errno) { + TH_LOG("Should reject bad syscall range"); + } + + /* + * Allowed range overflows usigned long + */ + prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, -1L, 0x1, &sel); + ASSERT_EQ(EINVAL, errno) { + TH_LOG("Should reject bad syscall range"); + } +} + +/* + * Use global selector for handle_sigsys tests, to avoid passing + * selector to signal handler + */ +char glob_sel; +int nr_syscalls_emulated; +int si_code; +int si_errno; + +static void handle_sigsys(int sig, siginfo_t *info, void *ucontext) +{ + si_code = info->si_code; + si_errno = info->si_errno; + + if (info->si_syscall == MAGIC_SYSCALL_1) + nr_syscalls_emulated++; + + /* In preparation for sigreturn. */ + SYSCALL_DISPATCH_OFF(glob_sel); +} + +TEST(dispatch_and_return) +{ + long ret; + struct sigaction act; + sigset_t mask; + + glob_sel = 0; + nr_syscalls_emulated = 0; + si_code = 0; + si_errno = 0; + + memset(&act, 0, sizeof(act)); + sigemptyset(&mask); + + act.sa_sigaction = handle_sigsys; + act.sa_flags = SA_SIGINFO; + act.sa_mask = mask; + + ret = sigaction(SIGSYS, &act, NULL); + ASSERT_EQ(0, ret); + + /* Make sure selector is good prior to prctl. */ + SYSCALL_DISPATCH_OFF(glob_sel); + + ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &glob_sel); + ASSERT_EQ(0, ret) { + TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH"); + } + + /* MAGIC_SYSCALL_1 doesn't exist. */ + SYSCALL_DISPATCH_OFF(glob_sel); + ret = syscall(MAGIC_SYSCALL_1); + EXPECT_EQ(-1, ret) { + TH_LOG("Dispatch triggered unexpectedly"); + } + + /* MAGIC_SYSCALL_1 should be emulated. */ + nr_syscalls_emulated = 0; + SYSCALL_DISPATCH_ON(glob_sel); + + ret = syscall(MAGIC_SYSCALL_1); + EXPECT_EQ(MAGIC_SYSCALL_1, ret) { + TH_LOG("Failed to intercept syscall"); + } + EXPECT_EQ(1, nr_syscalls_emulated) { + TH_LOG("Failed to emulate syscall"); + } + ASSERT_EQ(SYS_USER_DISPATCH, si_code) { + TH_LOG("Bad si_code in SIGSYS"); + } + ASSERT_EQ(0, si_errno) { + TH_LOG("Bad si_errno in SIGSYS"); + } +} + +TEST_SIGNAL(bad_selector, SIGSYS) +{ + long ret; + struct sigaction act; + sigset_t mask; + struct sysinfo info; + + glob_sel = SYSCALL_DISPATCH_FILTER_ALLOW; + nr_syscalls_emulated = 0; + si_code = 0; + si_errno = 0; + + memset(&act, 0, sizeof(act)); + sigemptyset(&mask); + + act.sa_sigaction = handle_sigsys; + act.sa_flags = SA_SIGINFO; + act.sa_mask = mask; + + ret = sigaction(SIGSYS, &act, NULL); + ASSERT_EQ(0, ret); + + /* Make sure selector is good prior to prctl. */ + SYSCALL_DISPATCH_OFF(glob_sel); + + ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &glob_sel); + ASSERT_EQ(0, ret) { + TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH"); + } + + glob_sel = -1; + + sysinfo(&info); + + /* Even though it is ready to catch SIGSYS, the signal is + * supposed to be uncatchable. + */ + + EXPECT_FALSE(true) { + TH_LOG("Unreachable!"); + } +} + +TEST(disable_dispatch) +{ + int ret; + struct sysinfo info; + char sel = 0; + + ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &sel); + ASSERT_EQ(0, ret) { + TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH"); + } + + /* MAGIC_SYSCALL_1 doesn't exist. */ + SYSCALL_DISPATCH_OFF(glob_sel); + + ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_OFF, 0, 0, 0); + EXPECT_EQ(0, ret) { + TH_LOG("Failed to unset syscall user dispatch"); + } + + /* Shouldn't have any effect... */ + SYSCALL_DISPATCH_ON(glob_sel); + + ret = syscall(__NR_sysinfo, &info); + EXPECT_EQ(0, ret) { + TH_LOG("Dispatch triggered unexpectedly"); + } +} + +TEST(direct_dispatch_range) +{ + int ret = 0; + struct sysinfo info; + char sel = SYSCALL_DISPATCH_FILTER_ALLOW; + + /* + * Instead of calculating libc addresses; allow the entire + * memory map and lock the selector. + */ + ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, -1L, &sel); + ASSERT_EQ(0, ret) { + TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH"); + } + + SYSCALL_DISPATCH_ON(sel); + + ret = sysinfo(&info); + ASSERT_EQ(0, ret) { + TH_LOG("Dispatch triggered unexpectedly"); + } +} + +TEST_HARNESS_MAIN -- cgit v1.2.3