From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../creating-testcases/AddingTestCases.txt | 105 +++++++++++++++++++++ .../tc-testing/creating-testcases/example.json | 55 +++++++++++ .../creating-testcases/scapy-example.json | 98 +++++++++++++++++++ .../tc-testing/creating-testcases/template.json | 51 ++++++++++ 4 files changed, 309 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt create mode 100644 tools/testing/selftests/tc-testing/creating-testcases/example.json create mode 100644 tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json create mode 100644 tools/testing/selftests/tc-testing/creating-testcases/template.json (limited to 'tools/testing/selftests/tc-testing/creating-testcases') diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt new file mode 100644 index 000000000..a28571aff --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt @@ -0,0 +1,105 @@ +tdc - Adding test cases for tdc + +Author: Lucas Bates - lucasb@mojatatu.com + +ADDING TEST CASES +----------------- + +User-defined tests should be added by defining a separate JSON file. This +will help prevent conflicts when updating the repository. Refer to +template.json for the required JSON format for test cases. + +Include the 'id' field, but do not assign a value. Running tdc with the -i +option will generate a unique ID for that test case. + +tdc will recursively search the 'tc-tests' subdirectory (or the +directories named with the -D option) for .json files. Any test case +files you create in these directories will automatically be included. +If you wish to store your custom test cases elsewhere, be sure to run +tdc with the -f argument and the path to your file, or the -D argument +and the path to your directory(ies). + +Be aware of required escape characters in the JSON data - particularly +when defining the match pattern. Refer to the supplied json test files +for examples when in doubt. The match pattern is written in json, and +will be used by python. So the match pattern will be a python regular +expression, but should be written using json syntax. + + +TEST CASE STRUCTURE +------------------- + +Each test case has required data: + +id: A unique alphanumeric value to identify a particular test case +name: Descriptive name that explains the command under test +skip: A completely optional key, if the corresponding value is "yes" + then tdc will not execute the test case in question. However, + this test case will still appear in the results output but + marked as skipped. This key can be placed anywhere inside the + test case at the top level. +category: A list of single-word descriptions covering what the command + under test is testing. Example: filter, actions, u32, gact, etc. +setup: The list of commands required to ensure the command under test + succeeds. For example: if testing a filter, the command to create + the qdisc would appear here. + This list can be empty. + Each command can be a string to be executed, or a list consisting + of a string which is a command to be executed, followed by 1 or + more acceptable exit codes for this command. + If only a string is given for the command, then an exit code of 0 + will be expected. +cmdUnderTest: The tc command being tested itself. +expExitCode: The code returned by the command under test upon its termination. + tdc will compare this value against the actual returned value. +verifyCmd: The tc command to be run to verify successful execution. + For example: if the command under test creates a gact action, + verifyCmd should be "$TC actions show action gact" +matchPattern: A regular expression to be applied against the output of the + verifyCmd to prove the command under test succeeded. This pattern + should be as specific as possible so that a false positive is not + matched. +matchCount: How many times the regex in matchPattern should match. A value + of 0 is acceptable. +teardown: The list of commands to clean up after the test is completed. + The environment should be returned to the same state as when + this test was started: qdiscs deleted, actions flushed, etc. + This list can be empty. + Each command can be a string to be executed, or a list consisting + of a string which is a command to be executed, followed by 1 or + more acceptable exit codes for this command. + If only a string is given for the command, then an exit code of 0 + will be expected. + + +SETUP/TEARDOWN ERRORS +--------------------- + +If an error is detected during the setup/teardown process, execution of the +tests will immediately stop with an error message and the namespace in which +the tests are run will be destroyed. This is to prevent inaccurate results +in the test cases. tdc will output a series of TAP results for the skipped +tests. + +Repeated failures of the setup/teardown may indicate a problem with the test +case, or possibly even a bug in one of the commands that are not being tested. + +It's possible to include acceptable exit codes with the setup/teardown command +so that it doesn't halt the script for an error that doesn't matter. Turn the +individual command into a list, with the command being first, followed by all +acceptable exit codes for the command. + +Example: + +A pair of setup commands. The first can have exit code 0, 1 or 255, the +second must have exit code 0. + + "setup": [ + [ + "$TC actions flush action gact", + 0, + 1, + 255 + ], + "$TC actions add action reclassify index 65536" + ], diff --git a/tools/testing/selftests/tc-testing/creating-testcases/example.json b/tools/testing/selftests/tc-testing/creating-testcases/example.json new file mode 100644 index 000000000..5ec501200 --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/example.json @@ -0,0 +1,55 @@ +[ + { + "id": "1f", + "name": "simple test to test framework", + "category": [ + "example" + ], + "setup": [ + "mkdir mytest" + ], + "cmdUnderTest": "touch mytest/blorfl", + "expExitCode": "0", + "verifyCmd": "ls mytest/* | grep '[b]lorfl'", + "matchPattern": "orfl", + "matchCount": "1", + "teardown": [ + "rm -rf mytest" + ] + }, + { + "id": "2f", + "name": "simple test, no need for verify", + "category": [ + "example" + ], + "setup": [ + "mkdir mytest", + "touch mytest/blorfl" + ], + "cmdUnderTest": "ls mytest/blorfl", + "expExitCode": "0", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "rm -rf mytest" + ] + }, + { + "id": "3f", + "name": "simple test, no need for setup or teardown (or verify)", + "category": [ + "example" + ], + "setup": [ + ], + "cmdUnderTest": "ip l l lo", + "expExitCode": "0", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + ] + } +] diff --git a/tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json b/tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json new file mode 100644 index 000000000..5a9377b72 --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json @@ -0,0 +1,98 @@ +[ + { + "id": "b1e9", + "name": "Test matching of source IP", + "category": [ + "actions", + "scapy" + ], + "plugins": { + "requires": [ + "nsPlugin", + "scapyPlugin" + ] + }, + "setup": [ + [ + "$TC qdisc del dev $DEV1 ingress", + 0, + 1, + 2, + 255 + ], + "$TC qdisc add dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 protocol ip flower src_ip 16.61.16.61 flowid 1:1 action ok", + "scapy": { + "iface": "$DEV0", + "count": 1, + "packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()" + }, + "expExitCode": "0", + "verifyCmd": "$TC -s -j filter ls dev $DEV1 ingress prio 3", + "matchJSON": [ + { + "path": [ + 1, + "options", + "actions", + 0, + "stats", + "packets" + ], + "value": 1 + } + ], + "teardown": [ + "$TC qdisc del dev $DEV1 ingress" + ] + }, + { + "id": "e9c4", + "name": "Test matching of source IP with wrong count", + "category": [ + "actions", + "scapy" + ], + "plugins": { + "requires": [ + "nsPlugin", + "scapyPlugin" + ] + }, + "setup": [ + [ + "$TC qdisc del dev $DEV1 ingress", + 0, + 1, + 2, + 255 + ], + "$TC qdisc add dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 protocol ip flower src_ip 16.61.16.61 flowid 1:1 action ok", + "scapy": { + "iface": "$DEV0", + "count": 3, + "packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()" + }, + "expExitCode": "0", + "verifyCmd": "$TC -s -j filter ls dev $DEV1 parent ffff:", + "matchJSON": [ + { + "path": [ + 1, + "options", + "actions", + 0, + "stats", + "packets" + ], + "value": 1 + } + ], + "teardown": [ + "$TC qdisc del dev $DEV1 ingress" + ] + } +] diff --git a/tools/testing/selftests/tc-testing/creating-testcases/template.json b/tools/testing/selftests/tc-testing/creating-testcases/template.json new file mode 100644 index 000000000..8b99b86d6 --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/template.json @@ -0,0 +1,51 @@ +[ + { + "id": "", + "name": "", + "category": [ + "", + "" + ], + "setup": [ + "" + ], + "cmdUnderTest": "", + "expExitCode": "", + "verifyCmd": "", + "matchPattern": "", + "matchCount": "", + "teardown": [ + "" + ] + }, + { + "id": "", + "name": "", + "category": [ + "", + "" + ], + "setup": [ + "", + [ + "", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "", + "expExitCode": "", + "verifyCmd": "", + "matchPattern": "", + "matchCount": "", + "teardown": [ + "", + [ + "", + 0, + 255 + ] + ] + } +] -- cgit v1.2.3