From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/timers/adjtick.c | 211 +++++++++++++++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 tools/testing/selftests/timers/adjtick.c (limited to 'tools/testing/selftests/timers/adjtick.c') diff --git a/tools/testing/selftests/timers/adjtick.c b/tools/testing/selftests/timers/adjtick.c new file mode 100644 index 000000000..47e05fdc3 --- /dev/null +++ b/tools/testing/selftests/timers/adjtick.c @@ -0,0 +1,211 @@ +/* adjtimex() tick adjustment test + * by: John Stultz + * (C) Copyright Linaro Limited 2015 + * Licensed under the GPLv2 + * + * To build: + * $ gcc adjtick.c -o adjtick -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include + +#include "../kselftest.h" + +#define CLOCK_MONOTONIC_RAW 4 + +#define NSEC_PER_SEC 1000000000LL +#define USEC_PER_SEC 1000000 + +#define MILLION 1000000 + +long systick; + +long long llabs(long long val) +{ + if (val < 0) + val = -val; + return val; +} + +unsigned long long ts_to_nsec(struct timespec ts) +{ + return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec; +} + +struct timespec nsec_to_ts(long long ns) +{ + struct timespec ts; + + ts.tv_sec = ns/NSEC_PER_SEC; + ts.tv_nsec = ns%NSEC_PER_SEC; + + return ts; +} + +long long diff_timespec(struct timespec start, struct timespec end) +{ + long long start_ns, end_ns; + + start_ns = ts_to_nsec(start); + end_ns = ts_to_nsec(end); + + return end_ns - start_ns; +} + +void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw) +{ + struct timespec start, mid, end; + long long diff = 0, tmp; + int i; + + clock_gettime(CLOCK_MONOTONIC, mon); + clock_gettime(CLOCK_MONOTONIC_RAW, raw); + + /* Try to get a more tightly bound pairing */ + for (i = 0; i < 3; i++) { + long long newdiff; + + clock_gettime(CLOCK_MONOTONIC, &start); + clock_gettime(CLOCK_MONOTONIC_RAW, &mid); + clock_gettime(CLOCK_MONOTONIC, &end); + + newdiff = diff_timespec(start, end); + if (diff == 0 || newdiff < diff) { + diff = newdiff; + *raw = mid; + tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2; + *mon = nsec_to_ts(tmp); + } + } +} + +long long get_ppm_drift(void) +{ + struct timespec mon_start, raw_start, mon_end, raw_end; + long long delta1, delta2, eppm; + + get_monotonic_and_raw(&mon_start, &raw_start); + + sleep(15); + + get_monotonic_and_raw(&mon_end, &raw_end); + + delta1 = diff_timespec(mon_start, mon_end); + delta2 = diff_timespec(raw_start, raw_end); + + eppm = (delta1*MILLION)/delta2 - MILLION; + + return eppm; +} + +int check_tick_adj(long tickval) +{ + long long eppm, ppm; + struct timex tx1; + + tx1.modes = ADJ_TICK; + tx1.modes |= ADJ_OFFSET; + tx1.modes |= ADJ_FREQUENCY; + tx1.modes |= ADJ_STATUS; + + tx1.status = STA_PLL; + tx1.offset = 0; + tx1.freq = 0; + tx1.tick = tickval; + + adjtimex(&tx1); + + sleep(1); + + ppm = ((long long)tickval * MILLION)/systick - MILLION; + printf("Estimating tick (act: %ld usec, %lld ppm): ", tickval, ppm); + + eppm = get_ppm_drift(); + printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm); + fflush(stdout); + + tx1.modes = 0; + adjtimex(&tx1); + + if (tx1.offset || tx1.freq || tx1.tick != tickval) { + printf(" [ERROR]\n"); + printf("\tUnexpected adjtimex return values, make sure ntpd is not running.\n"); + return -1; + } + + /* + * Here we use 100ppm difference as an error bound. + * We likely should see better, but some coarse clocksources + * cannot match the HZ tick size accurately, so we have a + * internal correction factor that doesn't scale exactly + * with the adjustment, resulting in > 10ppm error during + * a 10% adjustment. 100ppm also gives us more breathing + * room for interruptions during the measurement. + */ + if (llabs(eppm - ppm) > 100) { + printf(" [FAILED]\n"); + return -1; + } + printf(" [OK]\n"); + + return 0; +} + +int main(int argc, char **argv) +{ + struct timespec raw; + long tick, max, interval, err; + struct timex tx1; + + err = 0; + setbuf(stdout, NULL); + + if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) { + printf("ERR: NO CLOCK_MONOTONIC_RAW\n"); + return -1; + } + + printf("Each iteration takes about 15 seconds\n"); + + systick = sysconf(_SC_CLK_TCK); + systick = USEC_PER_SEC/sysconf(_SC_CLK_TCK); + max = systick/10; /* +/- 10% */ + interval = max/4; /* in 4 steps each side */ + + for (tick = (systick - max); tick < (systick + max); tick += interval) { + if (check_tick_adj(tick)) { + err = 1; + break; + } + } + + /* Reset things to zero */ + tx1.modes = ADJ_TICK; + tx1.modes |= ADJ_OFFSET; + tx1.modes |= ADJ_FREQUENCY; + + tx1.offset = 0; + tx1.freq = 0; + tx1.tick = systick; + + adjtimex(&tx1); + + if (err) + return ksft_exit_fail(); + + return ksft_exit_pass(); +} -- cgit v1.2.3