From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/timers/valid-adjtimex.c | 330 ++++++++++++++++++++++++ 1 file changed, 330 insertions(+) create mode 100644 tools/testing/selftests/timers/valid-adjtimex.c (limited to 'tools/testing/selftests/timers/valid-adjtimex.c') diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c new file mode 100644 index 000000000..48b9a8032 --- /dev/null +++ b/tools/testing/selftests/timers/valid-adjtimex.c @@ -0,0 +1,330 @@ +/* valid adjtimex test + * by: John Stultz + * (C) Copyright Linaro 2015 + * Licensed under the GPLv2 + * + * This test validates adjtimex interface with valid + * and invalid test data. + * + * Usage: valid-adjtimex + * + * To build: + * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../kselftest.h" + +#define NSEC_PER_SEC 1000000000LL +#define USEC_PER_SEC 1000000LL + +#define ADJ_SETOFFSET 0x0100 + +#include +int clock_adjtime(clockid_t id, struct timex *tx) +{ + return syscall(__NR_clock_adjtime, id, tx); +} + + +/* clear NTP time_status & time_state */ +int clear_time_state(void) +{ + struct timex tx; + int ret; + + tx.modes = ADJ_STATUS; + tx.status = 0; + ret = adjtimex(&tx); + return ret; +} + +#define NUM_FREQ_VALID 32 +#define NUM_FREQ_OUTOFRANGE 4 +#define NUM_FREQ_INVALID 2 + +long valid_freq[NUM_FREQ_VALID] = { + -499<<16, + -450<<16, + -400<<16, + -350<<16, + -300<<16, + -250<<16, + -200<<16, + -150<<16, + -100<<16, + -75<<16, + -50<<16, + -25<<16, + -10<<16, + -5<<16, + -1<<16, + -1000, + 1<<16, + 5<<16, + 10<<16, + 25<<16, + 50<<16, + 75<<16, + 100<<16, + 150<<16, + 200<<16, + 250<<16, + 300<<16, + 350<<16, + 400<<16, + 450<<16, + 499<<16, +}; + +long outofrange_freq[NUM_FREQ_OUTOFRANGE] = { + -1000<<16, + -550<<16, + 550<<16, + 1000<<16, +}; + +#define LONG_MAX (~0UL>>1) +#define LONG_MIN (-LONG_MAX - 1) + +long invalid_freq[NUM_FREQ_INVALID] = { + LONG_MAX, + LONG_MIN, +}; + +int validate_freq(void) +{ + struct timex tx; + int ret, pass = 0; + int i; + + clear_time_state(); + + memset(&tx, 0, sizeof(struct timex)); + /* Set the leap second insert flag */ + + printf("Testing ADJ_FREQ... "); + fflush(stdout); + for (i = 0; i < NUM_FREQ_VALID; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = valid_freq[i]; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("[FAIL]\n"); + printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n", + valid_freq[i], valid_freq[i]>>16); + pass = -1; + goto out; + } + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.freq != valid_freq[i]) { + printf("Warning: freq value %ld not what we set it (%ld)!\n", + tx.freq, valid_freq[i]); + } + } + for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = outofrange_freq[i]; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("[FAIL]\n"); + printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n", + outofrange_freq[i], outofrange_freq[i]>>16); + pass = -1; + goto out; + } + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.freq == outofrange_freq[i]) { + printf("[FAIL]\n"); + printf("ERROR: out of range value %ld actually set!\n", + tx.freq); + pass = -1; + goto out; + } + } + + + if (sizeof(long) == 8) { /* this case only applies to 64bit systems */ + for (i = 0; i < NUM_FREQ_INVALID; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = invalid_freq[i]; + ret = adjtimex(&tx); + if (ret >= 0) { + printf("[FAIL]\n"); + printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n", + invalid_freq[i]); + pass = -1; + goto out; + } + } + } + + printf("[OK]\n"); +out: + /* reset freq to zero */ + tx.modes = ADJ_FREQUENCY; + tx.freq = 0; + ret = adjtimex(&tx); + + return pass; +} + + +int set_offset(long long offset, int use_nano) +{ + struct timex tmx = {}; + int ret; + + tmx.modes = ADJ_SETOFFSET; + if (use_nano) { + tmx.modes |= ADJ_NANO; + + tmx.time.tv_sec = offset / NSEC_PER_SEC; + tmx.time.tv_usec = offset % NSEC_PER_SEC; + + if (offset < 0 && tmx.time.tv_usec) { + tmx.time.tv_sec -= 1; + tmx.time.tv_usec += NSEC_PER_SEC; + } + } else { + tmx.time.tv_sec = offset / USEC_PER_SEC; + tmx.time.tv_usec = offset % USEC_PER_SEC; + + if (offset < 0 && tmx.time.tv_usec) { + tmx.time.tv_sec -= 1; + tmx.time.tv_usec += USEC_PER_SEC; + } + } + + ret = clock_adjtime(CLOCK_REALTIME, &tmx); + if (ret < 0) { + printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec); + printf("[FAIL]\n"); + return -1; + } + return 0; +} + +int set_bad_offset(long sec, long usec, int use_nano) +{ + struct timex tmx = {}; + int ret; + + tmx.modes = ADJ_SETOFFSET; + if (use_nano) + tmx.modes |= ADJ_NANO; + + tmx.time.tv_sec = sec; + tmx.time.tv_usec = usec; + ret = clock_adjtime(CLOCK_REALTIME, &tmx); + if (ret >= 0) { + printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec); + printf("[FAIL]\n"); + return -1; + } + return 0; +} + +int validate_set_offset(void) +{ + printf("Testing ADJ_SETOFFSET... "); + fflush(stdout); + + /* Test valid values */ + if (set_offset(NSEC_PER_SEC - 1, 1)) + return -1; + + if (set_offset(-NSEC_PER_SEC + 1, 1)) + return -1; + + if (set_offset(-NSEC_PER_SEC - 1, 1)) + return -1; + + if (set_offset(5 * NSEC_PER_SEC, 1)) + return -1; + + if (set_offset(-5 * NSEC_PER_SEC, 1)) + return -1; + + if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1)) + return -1; + + if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1)) + return -1; + + if (set_offset(USEC_PER_SEC - 1, 0)) + return -1; + + if (set_offset(-USEC_PER_SEC + 1, 0)) + return -1; + + if (set_offset(-USEC_PER_SEC - 1, 0)) + return -1; + + if (set_offset(5 * USEC_PER_SEC, 0)) + return -1; + + if (set_offset(-5 * USEC_PER_SEC, 0)) + return -1; + + if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0)) + return -1; + + if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0)) + return -1; + + /* Test invalid values */ + if (set_bad_offset(0, -1, 1)) + return -1; + if (set_bad_offset(0, -1, 0)) + return -1; + if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, 2 * USEC_PER_SEC, 0)) + return -1; + if (set_bad_offset(0, NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, USEC_PER_SEC, 0)) + return -1; + if (set_bad_offset(0, -NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, -USEC_PER_SEC, 0)) + return -1; + + printf("[OK]\n"); + return 0; +} + +int main(int argc, char **argv) +{ + if (validate_freq()) + return ksft_exit_fail(); + + if (validate_set_offset()) + return ksft_exit_fail(); + + return ksft_exit_pass(); +} -- cgit v1.2.3