From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/vm/Makefile | 180 ++++++++++++++++++++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 tools/testing/selftests/vm/Makefile (limited to 'tools/testing/selftests/vm/Makefile') diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile new file mode 100644 index 000000000..89c14e41b --- /dev/null +++ b/tools/testing/selftests/vm/Makefile @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for vm selftests + +LOCAL_HDRS += $(selfdir)/vm/local_config.h $(top_srcdir)/mm/gup_test.h + +include local_config.mk + +uname_M := $(shell uname -m 2>/dev/null || echo not) +MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/' -e 's/ppc64.*/ppc64/') + +# Without this, failed build products remain, with up-to-date timestamps, +# thus tricking Make (and you!) into believing that All Is Well, in subsequent +# make invocations: +.DELETE_ON_ERROR: + +# Avoid accidental wrong builds, due to built-in rules working just a little +# bit too well--but not quite as well as required for our situation here. +# +# In other words, "make userfaultfd" is supposed to fail to build at all, +# because this Makefile only supports either "make" (all), or "make /full/path". +# However, the built-in rules, if not suppressed, will pick up CFLAGS and the +# initial LDLIBS (but not the target-specific LDLIBS, because those are only +# set for the full path target!). This causes it to get pretty far into building +# things despite using incorrect values such as an *occasionally* incomplete +# LDLIBS. +MAKEFLAGS += --no-builtin-rules + +CFLAGS = -Wall -I $(top_srcdir) -I $(top_srcdir)/usr/include $(EXTRA_CFLAGS) $(KHDR_INCLUDES) +LDLIBS = -lrt -lpthread +TEST_GEN_FILES = cow +TEST_GEN_FILES += compaction_test +TEST_GEN_FILES += gup_test +TEST_GEN_FILES += hmm-tests +TEST_GEN_FILES += hugetlb-madvise +TEST_GEN_FILES += hugepage-mmap +TEST_GEN_FILES += hugepage-mremap +TEST_GEN_FILES += hugepage-shm +TEST_GEN_FILES += hugepage-vmemmap +TEST_GEN_FILES += khugepaged +TEST_GEN_PROGS = madv_populate +TEST_GEN_FILES += map_fixed_noreplace +TEST_GEN_FILES += map_hugetlb +TEST_GEN_FILES += map_populate +TEST_GEN_FILES += memfd_secret +TEST_GEN_FILES += migration +TEST_GEN_FILES += mlock-random-test +TEST_GEN_FILES += mlock2-tests +TEST_GEN_FILES += mrelease_test +TEST_GEN_FILES += mremap_dontunmap +TEST_GEN_FILES += mremap_test +TEST_GEN_FILES += on-fault-limit +TEST_GEN_FILES += thuge-gen +TEST_GEN_FILES += transhuge-stress +TEST_GEN_FILES += userfaultfd +TEST_GEN_PROGS += soft-dirty +TEST_GEN_PROGS += split_huge_page_test +TEST_GEN_FILES += ksm_tests +TEST_GEN_PROGS += ksm_functional_tests + +ifeq ($(MACHINE),x86_64) +CAN_BUILD_I386 := $(shell ./../x86/check_cc.sh "$(CC)" ../x86/trivial_32bit_program.c -m32) +CAN_BUILD_X86_64 := $(shell ./../x86/check_cc.sh "$(CC)" ../x86/trivial_64bit_program.c) +CAN_BUILD_WITH_NOPIE := $(shell ./../x86/check_cc.sh "$(CC)" ../x86/trivial_program.c -no-pie) + +VMTARGETS := protection_keys +BINARIES_32 := $(VMTARGETS:%=%_32) +BINARIES_64 := $(VMTARGETS:%=%_64) + +ifeq ($(CAN_BUILD_WITH_NOPIE),1) +CFLAGS += -no-pie +endif + +ifeq ($(CAN_BUILD_I386),1) +TEST_GEN_FILES += $(BINARIES_32) +endif + +ifeq ($(CAN_BUILD_X86_64),1) +TEST_GEN_FILES += $(BINARIES_64) +endif +else + +ifneq (,$(findstring $(MACHINE),ppc64)) +TEST_GEN_FILES += protection_keys +endif + +endif + +ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64)) +TEST_GEN_FILES += va_128TBswitch +TEST_GEN_FILES += virtual_address_range +TEST_GEN_FILES += write_to_hugetlbfs +endif + +TEST_PROGS := run_vmtests.sh + +TEST_FILES := test_vmalloc.sh +TEST_FILES += test_hmm.sh +TEST_FILES += va_128TBswitch.sh + +include ../lib.mk + +$(OUTPUT)/cow: vm_util.c +$(OUTPUT)/khugepaged: vm_util.c +$(OUTPUT)/ksm_functional_tests: vm_util.c +$(OUTPUT)/madv_populate: vm_util.c +$(OUTPUT)/soft-dirty: vm_util.c +$(OUTPUT)/split_huge_page_test: vm_util.c +$(OUTPUT)/userfaultfd: vm_util.c + +ifeq ($(MACHINE),x86_64) +BINARIES_32 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_32)) +BINARIES_64 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_64)) + +define gen-target-rule-32 +$(1) $(1)_32: $(OUTPUT)/$(1)_32 +.PHONY: $(1) $(1)_32 +endef + +define gen-target-rule-64 +$(1) $(1)_64: $(OUTPUT)/$(1)_64 +.PHONY: $(1) $(1)_64 +endef + +ifeq ($(CAN_BUILD_I386),1) +$(BINARIES_32): CFLAGS += -m32 -mxsave +$(BINARIES_32): LDLIBS += -lrt -ldl -lm +$(BINARIES_32): $(OUTPUT)/%_32: %.c + $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(notdir $^) $(LDLIBS) -o $@ +$(foreach t,$(VMTARGETS),$(eval $(call gen-target-rule-32,$(t)))) +endif + +ifeq ($(CAN_BUILD_X86_64),1) +$(BINARIES_64): CFLAGS += -m64 -mxsave +$(BINARIES_64): LDLIBS += -lrt -ldl +$(BINARIES_64): $(OUTPUT)/%_64: %.c + $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(notdir $^) $(LDLIBS) -o $@ +$(foreach t,$(VMTARGETS),$(eval $(call gen-target-rule-64,$(t)))) +endif + +# x86_64 users should be encouraged to install 32-bit libraries +ifeq ($(CAN_BUILD_I386)$(CAN_BUILD_X86_64),01) +all: warn_32bit_failure + +warn_32bit_failure: + @echo "Warning: you seem to have a broken 32-bit build" 2>&1; \ + echo "environment. This will reduce test coverage of 64-bit" 2>&1; \ + echo "kernels. If you are using a Debian-like distribution," 2>&1; \ + echo "try:"; 2>&1; \ + echo ""; \ + echo " apt-get install gcc-multilib libc6-i386 libc6-dev-i386"; \ + echo ""; \ + echo "If you are using a Fedora-like distribution, try:"; \ + echo ""; \ + echo " yum install glibc-devel.*i686"; \ + exit 0; +endif +endif + +# cow_EXTRA_LIBS may get set in local_config.mk, or it may be left empty. +$(OUTPUT)/cow: LDLIBS += $(COW_EXTRA_LIBS) + +$(OUTPUT)/mlock-random-test $(OUTPUT)/memfd_secret: LDLIBS += -lcap + +$(OUTPUT)/ksm_tests: LDLIBS += -lnuma + +$(OUTPUT)/migration: LDLIBS += -lnuma + +local_config.mk local_config.h: check_config.sh + /bin/sh ./check_config.sh $(CC) + +EXTRA_CLEAN += local_config.mk local_config.h + +ifeq ($(COW_EXTRA_LIBS),) +all: warn_missing_liburing + +warn_missing_liburing: + @echo ; \ + echo "Warning: missing liburing support. Some COW tests will be skipped." ; \ + echo +endif -- cgit v1.2.3