From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/vm/memfd_secret.c | 296 ++++++++++++++++++++++++++++++ 1 file changed, 296 insertions(+) create mode 100644 tools/testing/selftests/vm/memfd_secret.c (limited to 'tools/testing/selftests/vm/memfd_secret.c') diff --git a/tools/testing/selftests/vm/memfd_secret.c b/tools/testing/selftests/vm/memfd_secret.c new file mode 100644 index 000000000..957b9e18c --- /dev/null +++ b/tools/testing/selftests/vm/memfd_secret.c @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright IBM Corporation, 2021 + * + * Author: Mike Rapoport + */ + +#define _GNU_SOURCE +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "../kselftest.h" + +#define fail(fmt, ...) ksft_test_result_fail(fmt, ##__VA_ARGS__) +#define pass(fmt, ...) ksft_test_result_pass(fmt, ##__VA_ARGS__) +#define skip(fmt, ...) ksft_test_result_skip(fmt, ##__VA_ARGS__) + +#ifdef __NR_memfd_secret + +#define PATTERN 0x55 + +static const int prot = PROT_READ | PROT_WRITE; +static const int mode = MAP_SHARED; + +static unsigned long page_size; +static unsigned long mlock_limit_cur; +static unsigned long mlock_limit_max; + +static int memfd_secret(unsigned int flags) +{ + return syscall(__NR_memfd_secret, flags); +} + +static void test_file_apis(int fd) +{ + char buf[64]; + + if ((read(fd, buf, sizeof(buf)) >= 0) || + (write(fd, buf, sizeof(buf)) >= 0) || + (pread(fd, buf, sizeof(buf), 0) >= 0) || + (pwrite(fd, buf, sizeof(buf), 0) >= 0)) + fail("unexpected file IO\n"); + else + pass("file IO is blocked as expected\n"); +} + +static void test_mlock_limit(int fd) +{ + size_t len; + char *mem; + + len = mlock_limit_cur; + mem = mmap(NULL, len, prot, mode, fd, 0); + if (mem == MAP_FAILED) { + fail("unable to mmap secret memory\n"); + return; + } + munmap(mem, len); + + len = mlock_limit_max * 2; + mem = mmap(NULL, len, prot, mode, fd, 0); + if (mem != MAP_FAILED) { + fail("unexpected mlock limit violation\n"); + munmap(mem, len); + return; + } + + pass("mlock limit is respected\n"); +} + +static void try_process_vm_read(int fd, int pipefd[2]) +{ + struct iovec liov, riov; + char buf[64]; + char *mem; + + if (read(pipefd[0], &mem, sizeof(mem)) < 0) { + fail("pipe write: %s\n", strerror(errno)); + exit(KSFT_FAIL); + } + + liov.iov_len = riov.iov_len = sizeof(buf); + liov.iov_base = buf; + riov.iov_base = mem; + + if (process_vm_readv(getppid(), &liov, 1, &riov, 1, 0) < 0) { + if (errno == ENOSYS) + exit(KSFT_SKIP); + exit(KSFT_PASS); + } + + exit(KSFT_FAIL); +} + +static void try_ptrace(int fd, int pipefd[2]) +{ + pid_t ppid = getppid(); + int status; + char *mem; + long ret; + + if (read(pipefd[0], &mem, sizeof(mem)) < 0) { + perror("pipe write"); + exit(KSFT_FAIL); + } + + ret = ptrace(PTRACE_ATTACH, ppid, 0, 0); + if (ret) { + perror("ptrace_attach"); + exit(KSFT_FAIL); + } + + ret = waitpid(ppid, &status, WUNTRACED); + if ((ret != ppid) || !(WIFSTOPPED(status))) { + fprintf(stderr, "weird waitppid result %ld stat %x\n", + ret, status); + exit(KSFT_FAIL); + } + + if (ptrace(PTRACE_PEEKDATA, ppid, mem, 0)) + exit(KSFT_PASS); + + exit(KSFT_FAIL); +} + +static void check_child_status(pid_t pid, const char *name) +{ + int status; + + waitpid(pid, &status, 0); + + if (WIFEXITED(status) && WEXITSTATUS(status) == KSFT_SKIP) { + skip("%s is not supported\n", name); + return; + } + + if ((WIFEXITED(status) && WEXITSTATUS(status) == KSFT_PASS) || + WIFSIGNALED(status)) { + pass("%s is blocked as expected\n", name); + return; + } + + fail("%s: unexpected memory access\n", name); +} + +static void test_remote_access(int fd, const char *name, + void (*func)(int fd, int pipefd[2])) +{ + int pipefd[2]; + pid_t pid; + char *mem; + + if (pipe(pipefd)) { + fail("pipe failed: %s\n", strerror(errno)); + return; + } + + pid = fork(); + if (pid < 0) { + fail("fork failed: %s\n", strerror(errno)); + return; + } + + if (pid == 0) { + func(fd, pipefd); + return; + } + + mem = mmap(NULL, page_size, prot, mode, fd, 0); + if (mem == MAP_FAILED) { + fail("Unable to mmap secret memory\n"); + return; + } + + ftruncate(fd, page_size); + memset(mem, PATTERN, page_size); + + if (write(pipefd[1], &mem, sizeof(mem)) < 0) { + fail("pipe write: %s\n", strerror(errno)); + return; + } + + check_child_status(pid, name); +} + +static void test_process_vm_read(int fd) +{ + test_remote_access(fd, "process_vm_read", try_process_vm_read); +} + +static void test_ptrace(int fd) +{ + test_remote_access(fd, "ptrace", try_ptrace); +} + +static int set_cap_limits(rlim_t max) +{ + struct rlimit new; + cap_t cap = cap_init(); + + new.rlim_cur = max; + new.rlim_max = max; + if (setrlimit(RLIMIT_MEMLOCK, &new)) { + perror("setrlimit() returns error"); + return -1; + } + + /* drop capabilities including CAP_IPC_LOCK */ + if (cap_set_proc(cap)) { + perror("cap_set_proc() returns error"); + return -2; + } + + return 0; +} + +static void prepare(void) +{ + struct rlimit rlim; + + page_size = sysconf(_SC_PAGE_SIZE); + if (!page_size) + ksft_exit_fail_msg("Failed to get page size %s\n", + strerror(errno)); + + if (getrlimit(RLIMIT_MEMLOCK, &rlim)) + ksft_exit_fail_msg("Unable to detect mlock limit: %s\n", + strerror(errno)); + + mlock_limit_cur = rlim.rlim_cur; + mlock_limit_max = rlim.rlim_max; + + printf("page_size: %ld, mlock.soft: %ld, mlock.hard: %ld\n", + page_size, mlock_limit_cur, mlock_limit_max); + + if (page_size > mlock_limit_cur) + mlock_limit_cur = page_size; + if (page_size > mlock_limit_max) + mlock_limit_max = page_size; + + if (set_cap_limits(mlock_limit_max)) + ksft_exit_fail_msg("Unable to set mlock limit: %s\n", + strerror(errno)); +} + +#define NUM_TESTS 4 + +int main(int argc, char *argv[]) +{ + int fd; + + prepare(); + + ksft_print_header(); + ksft_set_plan(NUM_TESTS); + + fd = memfd_secret(0); + if (fd < 0) { + if (errno == ENOSYS) + ksft_exit_skip("memfd_secret is not supported\n"); + else + ksft_exit_fail_msg("memfd_secret failed: %s\n", + strerror(errno)); + } + + test_mlock_limit(fd); + test_file_apis(fd); + test_process_vm_read(fd); + test_ptrace(fd); + + close(fd); + + ksft_finished(); +} + +#else /* __NR_memfd_secret */ + +int main(int argc, char *argv[]) +{ + printf("skip: skipping memfd_secret test (missing __NR_memfd_secret)\n"); + return KSFT_SKIP; +} + +#endif /* __NR_memfd_secret */ -- cgit v1.2.3