From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/vm/pkey-helpers.h | 226 ++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 tools/testing/selftests/vm/pkey-helpers.h (limited to 'tools/testing/selftests/vm/pkey-helpers.h') diff --git a/tools/testing/selftests/vm/pkey-helpers.h b/tools/testing/selftests/vm/pkey-helpers.h new file mode 100644 index 000000000..92f3be3dd --- /dev/null +++ b/tools/testing/selftests/vm/pkey-helpers.h @@ -0,0 +1,226 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PKEYS_HELPER_H +#define _PKEYS_HELPER_H +#define _GNU_SOURCE +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../kselftest.h" + +/* Define some kernel-like types */ +#define u8 __u8 +#define u16 __u16 +#define u32 __u32 +#define u64 __u64 + +#define PTR_ERR_ENOTSUP ((void *)-ENOTSUP) + +#ifndef DEBUG_LEVEL +#define DEBUG_LEVEL 0 +#endif +#define DPRINT_IN_SIGNAL_BUF_SIZE 4096 +extern int dprint_in_signal; +extern char dprint_in_signal_buffer[DPRINT_IN_SIGNAL_BUF_SIZE]; + +extern int test_nr; +extern int iteration_nr; + +#ifdef __GNUC__ +__attribute__((format(printf, 1, 2))) +#endif +static inline void sigsafe_printf(const char *format, ...) +{ + va_list ap; + + if (!dprint_in_signal) { + va_start(ap, format); + vprintf(format, ap); + va_end(ap); + } else { + int ret; + /* + * No printf() functions are signal-safe. + * They deadlock easily. Write the format + * string to get some output, even if + * incomplete. + */ + ret = write(1, format, strlen(format)); + if (ret < 0) + exit(1); + } +} +#define dprintf_level(level, args...) do { \ + if (level <= DEBUG_LEVEL) \ + sigsafe_printf(args); \ +} while (0) +#define dprintf0(args...) dprintf_level(0, args) +#define dprintf1(args...) dprintf_level(1, args) +#define dprintf2(args...) dprintf_level(2, args) +#define dprintf3(args...) dprintf_level(3, args) +#define dprintf4(args...) dprintf_level(4, args) + +extern void abort_hooks(void); +#define pkey_assert(condition) do { \ + if (!(condition)) { \ + dprintf0("assert() at %s::%d test_nr: %d iteration: %d\n", \ + __FILE__, __LINE__, \ + test_nr, iteration_nr); \ + dprintf0("errno at assert: %d", errno); \ + abort_hooks(); \ + exit(__LINE__); \ + } \ +} while (0) + +__attribute__((noinline)) int read_ptr(int *ptr); +void expected_pkey_fault(int pkey); +int sys_pkey_alloc(unsigned long flags, unsigned long init_val); +int sys_pkey_free(unsigned long pkey); +int mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot, + unsigned long pkey); +void record_pkey_malloc(void *ptr, long size, int prot); + +#if defined(__i386__) || defined(__x86_64__) /* arch */ +#include "pkey-x86.h" +#elif defined(__powerpc64__) /* arch */ +#include "pkey-powerpc.h" +#else /* arch */ +#error Architecture not supported +#endif /* arch */ + +#define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE) + +static inline u64 set_pkey_bits(u64 reg, int pkey, u64 flags) +{ + u32 shift = pkey_bit_position(pkey); + /* mask out bits from pkey in old value */ + reg &= ~((u64)PKEY_MASK << shift); + /* OR in new bits for pkey */ + reg |= (flags & PKEY_MASK) << shift; + return reg; +} + +static inline u64 get_pkey_bits(u64 reg, int pkey) +{ + u32 shift = pkey_bit_position(pkey); + /* + * shift down the relevant bits to the lowest two, then + * mask off all the other higher bits + */ + return ((reg >> shift) & PKEY_MASK); +} + +extern u64 shadow_pkey_reg; + +static inline u64 _read_pkey_reg(int line) +{ + u64 pkey_reg = __read_pkey_reg(); + + dprintf4("read_pkey_reg(line=%d) pkey_reg: %016llx" + " shadow: %016llx\n", + line, pkey_reg, shadow_pkey_reg); + assert(pkey_reg == shadow_pkey_reg); + + return pkey_reg; +} + +#define read_pkey_reg() _read_pkey_reg(__LINE__) + +static inline void write_pkey_reg(u64 pkey_reg) +{ + dprintf4("%s() changing %016llx to %016llx\n", __func__, + __read_pkey_reg(), pkey_reg); + /* will do the shadow check for us: */ + read_pkey_reg(); + __write_pkey_reg(pkey_reg); + shadow_pkey_reg = pkey_reg; + dprintf4("%s(%016llx) pkey_reg: %016llx\n", __func__, + pkey_reg, __read_pkey_reg()); +} + +/* + * These are technically racy. since something could + * change PKEY register between the read and the write. + */ +static inline void __pkey_access_allow(int pkey, int do_allow) +{ + u64 pkey_reg = read_pkey_reg(); + int bit = pkey * 2; + + if (do_allow) + pkey_reg &= (1<si_pkey; +#else + return (u32 *)(((u8 *)si) + si_pkey_offset); +#endif +} + +static inline int kernel_has_pkeys(void) +{ + /* try allocating a key and see if it succeeds */ + int ret = sys_pkey_alloc(0, 0); + if (ret <= 0) { + return 0; + } + sys_pkey_free(ret); + return 1; +} + +static inline int is_pkeys_supported(void) +{ + /* check if the cpu supports pkeys */ + if (!cpu_has_pkeys()) { + dprintf1("SKIP: %s: no CPU support\n", __func__); + return 0; + } + + /* check if the kernel supports pkeys */ + if (!kernel_has_pkeys()) { + dprintf1("SKIP: %s: no kernel support\n", __func__); + return 0; + } + + return 1; +} + +#endif /* _PKEYS_HELPER_H */ -- cgit v1.2.3