From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/testing/selftests/vm/test_vmalloc.sh | 177 +++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100755 tools/testing/selftests/vm/test_vmalloc.sh (limited to 'tools/testing/selftests/vm/test_vmalloc.sh') diff --git a/tools/testing/selftests/vm/test_vmalloc.sh b/tools/testing/selftests/vm/test_vmalloc.sh new file mode 100755 index 000000000..d73b84673 --- /dev/null +++ b/tools/testing/selftests/vm/test_vmalloc.sh @@ -0,0 +1,177 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2018 Uladzislau Rezki (Sony) +# +# This is a test script for the kernel test driver to analyse vmalloc +# allocator. Therefore it is just a kernel module loader. You can specify +# and pass different parameters in order to: +# a) analyse performance of vmalloc allocations; +# b) stressing and stability check of vmalloc subsystem. + +TEST_NAME="vmalloc" +DRIVER="test_${TEST_NAME}" +NUM_CPUS=`grep -c ^processor /proc/cpuinfo` + +# 1 if fails +exitcode=1 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# +# Static templates for performance, stressing and smoke tests. +# Also it is possible to pass any supported parameters manualy. +# +PERF_PARAM="sequential_test_order=1 test_repeat_count=3" +SMOKE_PARAM="test_loop_count=10000 test_repeat_count=10" +STRESS_PARAM="nr_threads=$NUM_CPUS test_repeat_count=20" + +check_test_requirements() +{ + uid=$(id -u) + if [ $uid -ne 0 ]; then + echo "$0: Must be run as root" + exit $ksft_skip + fi + + if ! which modprobe > /dev/null 2>&1; then + echo "$0: You need modprobe installed" + exit $ksft_skip + fi + + if ! modinfo $DRIVER > /dev/null 2>&1; then + echo "$0: You must have the following enabled in your kernel:" + echo "CONFIG_TEST_VMALLOC=m" + exit $ksft_skip + fi +} + +run_perfformance_check() +{ + echo "Run performance tests to evaluate how fast vmalloc allocation is." + echo "It runs all test cases on one single CPU with sequential order." + + modprobe $DRIVER $PERF_PARAM > /dev/null 2>&1 + echo "Done." + echo "Ccheck the kernel message buffer to see the summary." +} + +run_stability_check() +{ + echo "Run stability tests. In order to stress vmalloc subsystem all" + echo "available test cases are run by NUM_CPUS workers simultaneously." + echo "It will take time, so be patient." + + modprobe $DRIVER $STRESS_PARAM > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +run_smoke_check() +{ + echo "Run smoke test. Note, this test provides basic coverage." + echo "Please check $0 output how it can be used" + echo "for deep performance analysis as well as stress testing." + + modprobe $DRIVER $SMOKE_PARAM > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +usage() +{ + echo -n "Usage: $0 [ performance ] | [ stress ] | | [ smoke ] | " + echo "manual parameters" + echo + echo "Valid tests and parameters:" + echo + modinfo $DRIVER + echo + echo "Example usage:" + echo + echo "# Shows help message" + echo "./${DRIVER}.sh" + echo + echo "# Runs 1 test(id_1), repeats it 5 times by NUM_CPUS workers" + echo "./${DRIVER}.sh nr_threads=$NUM_CPUS run_test_mask=1 test_repeat_count=5" + echo + echo -n "# Runs 4 tests(id_1|id_2|id_4|id_16) on one CPU with " + echo "sequential order" + echo -n "./${DRIVER}.sh sequential_test_order=1 " + echo "run_test_mask=23" + echo + echo -n "# Runs all tests by NUM_CPUS workers, shuffled order, repeats " + echo "20 times" + echo "./${DRIVER}.sh nr_threads=$NUM_CPUS test_repeat_count=20" + echo + echo "# Performance analysis" + echo "./${DRIVER}.sh performance" + echo + echo "# Stress testing" + echo "./${DRIVER}.sh stress" + echo + exit 0 +} + +function validate_passed_args() +{ + VALID_ARGS=`modinfo $DRIVER | awk '/parm:/ {print $2}' | sed 's/:.*//'` + + # + # Something has been passed, check it. + # + for passed_arg in $@; do + key=${passed_arg//=*/} + val="${passed_arg:$((${#key}+1))}" + valid=0 + + for valid_arg in $VALID_ARGS; do + if [[ $key = $valid_arg ]] && [[ $val -gt 0 ]]; then + valid=1 + break + fi + done + + if [[ $valid -ne 1 ]]; then + echo "Error: key or value is not correct: ${key} $val" + exit $exitcode + fi + done +} + +function run_manual_check() +{ + # + # Validate passed parameters. If there is wrong one, + # the script exists and does not execute further. + # + validate_passed_args $@ + + echo "Run the test with following parameters: $@" + modprobe $DRIVER $@ > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +function run_test() +{ + if [ $# -eq 0 ]; then + usage + else + if [[ "$1" = "performance" ]]; then + run_perfformance_check + elif [[ "$1" = "stress" ]]; then + run_stability_check + elif [[ "$1" = "smoke" ]]; then + run_smoke_check + else + run_manual_check $@ + fi + fi +} + +check_test_requirements +run_test $@ + +exit 0 -- cgit v1.2.3