From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/usb/usbip/libsrc/usbip_device_driver.c | 158 +++++++++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 tools/usb/usbip/libsrc/usbip_device_driver.c (limited to 'tools/usb/usbip/libsrc/usbip_device_driver.c') diff --git a/tools/usb/usbip/libsrc/usbip_device_driver.c b/tools/usb/usbip/libsrc/usbip_device_driver.c new file mode 100644 index 000000000..927a151fa --- /dev/null +++ b/tools/usb/usbip/libsrc/usbip_device_driver.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2015 Karol Kosik + * 2015 Samsung Electronics + * Author: Igor Kotrasinski + * + * Based on tools/usb/usbip/libsrc/usbip_host_driver.c, which is: + * Copyright (C) 2011 matt mooney + * 2005-2007 Takahiro Hirofuchi + */ + +#include +#include +#include + +#include + +#include "usbip_host_common.h" +#include "usbip_device_driver.h" + +#undef PROGNAME +#define PROGNAME "libusbip" + +#define copy_descr_attr16(dev, descr, attr) \ + ((dev)->attr = le16toh((descr)->attr)) \ + +#define copy_descr_attr(dev, descr, attr) \ + ((dev)->attr = (descr)->attr) \ + +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +static struct { + enum usb_device_speed speed; + const char *name; +} speed_names[] = { + { + .speed = USB_SPEED_UNKNOWN, + .name = "UNKNOWN", + }, + { + .speed = USB_SPEED_LOW, + .name = "low-speed", + }, + { + .speed = USB_SPEED_FULL, + .name = "full-speed", + }, + { + .speed = USB_SPEED_HIGH, + .name = "high-speed", + }, + { + .speed = USB_SPEED_WIRELESS, + .name = "wireless", + }, + { + .speed = USB_SPEED_SUPER, + .name = "super-speed", + }, +}; + +static +int read_usb_vudc_device(struct udev_device *sdev, struct usbip_usb_device *dev) +{ + const char *path, *name; + char filepath[SYSFS_PATH_MAX]; + struct usb_device_descriptor descr; + unsigned int i; + FILE *fd = NULL; + struct udev_device *plat; + const char *speed; + size_t ret; + + plat = udev_device_get_parent(sdev); + path = udev_device_get_syspath(plat); + snprintf(filepath, SYSFS_PATH_MAX, "%s/%s", + path, VUDC_DEVICE_DESCR_FILE); + fd = fopen(filepath, "r"); + if (!fd) + return -1; + ret = fread((char *) &descr, sizeof(descr), 1, fd); + if (ret != 1) { + err("Cannot read vudc device descr file: %s", strerror(errno)); + goto err; + } + fclose(fd); + + copy_descr_attr(dev, &descr, bDeviceClass); + copy_descr_attr(dev, &descr, bDeviceSubClass); + copy_descr_attr(dev, &descr, bDeviceProtocol); + copy_descr_attr(dev, &descr, bNumConfigurations); + copy_descr_attr16(dev, &descr, idVendor); + copy_descr_attr16(dev, &descr, idProduct); + copy_descr_attr16(dev, &descr, bcdDevice); + + strncpy(dev->path, path, SYSFS_PATH_MAX - 1); + dev->path[SYSFS_PATH_MAX - 1] = '\0'; + + dev->speed = USB_SPEED_UNKNOWN; + speed = udev_device_get_sysattr_value(sdev, "current_speed"); + if (speed) { + for (i = 0; i < ARRAY_SIZE(speed_names); i++) { + if (!strcmp(speed_names[i].name, speed)) { + dev->speed = speed_names[i].speed; + break; + } + } + } + + /* Only used for user output, little sense to output them in general */ + dev->bNumInterfaces = 0; + dev->bConfigurationValue = 0; + dev->busnum = 0; + + name = udev_device_get_sysname(plat); + strncpy(dev->busid, name, SYSFS_BUS_ID_SIZE - 1); + dev->busid[SYSFS_BUS_ID_SIZE - 1] = '\0'; + return 0; +err: + fclose(fd); + return -1; +} + +static int is_my_device(struct udev_device *dev) +{ + const char *driver; + + driver = udev_device_get_property_value(dev, "USB_UDC_NAME"); + return driver != NULL && !strcmp(driver, USBIP_DEVICE_DRV_NAME); +} + +static int usbip_device_driver_open(struct usbip_host_driver *hdriver) +{ + int ret; + + hdriver->ndevs = 0; + INIT_LIST_HEAD(&hdriver->edev_list); + + ret = usbip_generic_driver_open(hdriver); + if (ret) + err("please load " USBIP_CORE_MOD_NAME ".ko and " + USBIP_DEVICE_DRV_NAME ".ko!"); + + return ret; +} + +struct usbip_host_driver device_driver = { + .edev_list = LIST_HEAD_INIT(device_driver.edev_list), + .udev_subsystem = "udc", + .ops = { + .open = usbip_device_driver_open, + .close = usbip_generic_driver_close, + .refresh_device_list = usbip_generic_refresh_device_list, + .get_device = usbip_generic_get_device, + .read_device = read_usb_vudc_device, + .is_my_device = is_my_device, + }, +}; -- cgit v1.2.3