From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/usb/usbip/src/usbip_attach.c | 243 +++++++++++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 tools/usb/usbip/src/usbip_attach.c (limited to 'tools/usb/usbip/src/usbip_attach.c') diff --git a/tools/usb/usbip/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c new file mode 100644 index 000000000..b4aeb9f1f --- /dev/null +++ b/tools/usb/usbip/src/usbip_attach.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2011 matt mooney + * 2005-2007 Takahiro Hirofuchi + * Copyright (C) 2015-2016 Samsung Electronics + * Igor Kotrasinski + * Krzysztof Opasiak + */ + +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "vhci_driver.h" +#include "usbip_common.h" +#include "usbip_network.h" +#include "usbip.h" + +static const char usbip_attach_usage_string[] = + "usbip attach \n" + " -r, --remote= The machine with exported USB devices\n" + " -b, --busid= Busid of the device on \n" + " -d, --device= Id of the virtual UDC on \n"; + +void usbip_attach_usage(void) +{ + printf("usage: %s", usbip_attach_usage_string); +} + +#define MAX_BUFF 100 +static int record_connection(char *host, char *port, char *busid, int rhport) +{ + int fd; + char path[PATH_MAX+1]; + char buff[MAX_BUFF+1]; + int ret; + + ret = mkdir(VHCI_STATE_PATH, 0700); + if (ret < 0) { + /* if VHCI_STATE_PATH exists, then it better be a directory */ + if (errno == EEXIST) { + struct stat s; + + ret = stat(VHCI_STATE_PATH, &s); + if (ret < 0) + return -1; + if (!(s.st_mode & S_IFDIR)) + return -1; + } else + return -1; + } + + snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", rhport); + + fd = open(path, O_WRONLY|O_CREAT|O_TRUNC, S_IRWXU); + if (fd < 0) + return -1; + + snprintf(buff, MAX_BUFF, "%s %s %s\n", + host, port, busid); + + ret = write(fd, buff, strlen(buff)); + if (ret != (ssize_t) strlen(buff)) { + close(fd); + return -1; + } + + close(fd); + + return 0; +} + +static int import_device(int sockfd, struct usbip_usb_device *udev) +{ + int rc; + int port; + uint32_t speed = udev->speed; + + rc = usbip_vhci_driver_open(); + if (rc < 0) { + err("open vhci_driver"); + goto err_out; + } + + do { + port = usbip_vhci_get_free_port(speed); + if (port < 0) { + err("no free port"); + goto err_driver_close; + } + + dbg("got free port %d", port); + + rc = usbip_vhci_attach_device(port, sockfd, udev->busnum, + udev->devnum, udev->speed); + if (rc < 0 && errno != EBUSY) { + err("import device"); + goto err_driver_close; + } + } while (rc < 0); + + usbip_vhci_driver_close(); + + return port; + +err_driver_close: + usbip_vhci_driver_close(); +err_out: + return -1; +} + +static int query_import_device(int sockfd, char *busid) +{ + int rc; + struct op_import_request request; + struct op_import_reply reply; + uint16_t code = OP_REP_IMPORT; + int status; + + memset(&request, 0, sizeof(request)); + memset(&reply, 0, sizeof(reply)); + + /* send a request */ + rc = usbip_net_send_op_common(sockfd, OP_REQ_IMPORT, 0); + if (rc < 0) { + err("send op_common"); + return -1; + } + + strncpy(request.busid, busid, SYSFS_BUS_ID_SIZE-1); + + PACK_OP_IMPORT_REQUEST(0, &request); + + rc = usbip_net_send(sockfd, (void *) &request, sizeof(request)); + if (rc < 0) { + err("send op_import_request"); + return -1; + } + + /* receive a reply */ + rc = usbip_net_recv_op_common(sockfd, &code, &status); + if (rc < 0) { + err("Attach Request for %s failed - %s\n", + busid, usbip_op_common_status_string(status)); + return -1; + } + + rc = usbip_net_recv(sockfd, (void *) &reply, sizeof(reply)); + if (rc < 0) { + err("recv op_import_reply"); + return -1; + } + + PACK_OP_IMPORT_REPLY(0, &reply); + + /* check the reply */ + if (strncmp(reply.udev.busid, busid, SYSFS_BUS_ID_SIZE)) { + err("recv different busid %s", reply.udev.busid); + return -1; + } + + /* import a device */ + return import_device(sockfd, &reply.udev); +} + +static int attach_device(char *host, char *busid) +{ + int sockfd; + int rc; + int rhport; + + sockfd = usbip_net_tcp_connect(host, usbip_port_string); + if (sockfd < 0) { + err("tcp connect"); + return -1; + } + + rhport = query_import_device(sockfd, busid); + if (rhport < 0) + return -1; + + close(sockfd); + + rc = record_connection(host, usbip_port_string, busid, rhport); + if (rc < 0) { + err("record connection"); + return -1; + } + + return 0; +} + +int usbip_attach(int argc, char *argv[]) +{ + static const struct option opts[] = { + { "remote", required_argument, NULL, 'r' }, + { "busid", required_argument, NULL, 'b' }, + { "device", required_argument, NULL, 'd' }, + { NULL, 0, NULL, 0 } + }; + char *host = NULL; + char *busid = NULL; + int opt; + int ret = -1; + + for (;;) { + opt = getopt_long(argc, argv, "d:r:b:", opts, NULL); + + if (opt == -1) + break; + + switch (opt) { + case 'r': + host = optarg; + break; + case 'd': + case 'b': + busid = optarg; + break; + default: + goto err_out; + } + } + + if (!host || !busid) + goto err_out; + + ret = attach_device(host, busid); + goto out; + +err_out: + usbip_attach_usage(); +out: + return ret; +} -- cgit v1.2.3