Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 735 insertions, 0 deletions

diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
new file mode 100644
index 000000000..ac1e51927
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-block
@@ -0,0 +1,735 @@
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+
+What:		/sys/block/<disk>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		device is offset from the internal allocation unit's
+		natural alignment.
+
+
+What:		/sys/block/<disk>/diskseq
+Date:		February 2021
+Contact:	Matteo Croce <mcroce@microsoft.com>
+Description:
+		The /sys/block/<disk>/diskseq files reports the disk
+		sequence number, which is a monotonically increasing
+		number assigned to every drive.
+		Some devices, like the loop device, refresh such number
+		every time the backing file is changed.
+		The value type is 64 bit unsigned.
+
+
+What:		/sys/block/<disk>/inflight
+Date:		October 2009
+Contact:	Jens Axboe <axboe@kernel.dk>, Nikanth Karthikesan <knikanth@suse.de>
+Description:
+		Reports the number of I/O requests currently in progress
+		(pending / in flight) in a device driver. This can be less
+		than the number of requests queued in the block device queue.
+		The report contains 2 fields: one for read requests
+		and one for write requests.
+		The value type is unsigned int.
+		Cf. Documentation/block/stat.rst which contains a single value for
+		requests in flight.
+		This is related to /sys/block/<disk>/queue/nr_requests
+		and for SCSI device also its queue_depth.
+
+
+What:		/sys/block/<disk>/integrity/device_is_integrity_capable
+Date:		July 2014
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether a storage device is capable of storing
+		integrity metadata. Set if the device is T10 PI-capable.
+
+
+What:		/sys/block/<disk>/integrity/format
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Metadata format for integrity capable block device.
+		E.g. T10-DIF-TYPE1-CRC.
+
+
+What:		/sys/block/<disk>/integrity/protection_interval_bytes
+Date:		July 2015
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Describes the number of data bytes which are protected
+		by one integrity tuple. Typically the device's logical
+		block size.
+
+
+What:		/sys/block/<disk>/integrity/read_verify
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should verify the
+		integrity of read requests serviced by devices that
+		support sending integrity metadata.
+
+
+What:		/sys/block/<disk>/integrity/tag_size
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Number of bytes of integrity tag space available per
+		512 bytes of data.
+
+
+What:		/sys/block/<disk>/integrity/write_generate
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should automatically
+		generate checksums for write requests bound for
+		devices that support receiving integrity metadata.
+
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+
+What:		/sys/block/<disk>/<partition>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		partition is offset from the internal allocation unit's
+		natural alignment.
+
+
+What:		/sys/block/<disk>/<partition>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/<partition>/stat files display the
+		I/O statistics of partition <partition>. The format is the
+		same as the format of /sys/block/<disk>/stat.
+
+
+What:		/sys/block/<disk>/queue/add_random
+Date:		June 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file allows to turn off the disk entropy contribution.
+		Default value of this file is '1'(on).
+
+
+What:		/sys/block/<disk>/queue/chunk_sectors
+Date:		September 2016
+Contact:	Hannes Reinecke <hare@suse.com>
+Description:
+		[RO] chunk_sectors has different meaning depending on the type
+		of the disk. For a RAID device (dm-raid), chunk_sectors
+		indicates the size in 512B sectors of the RAID volume stripe
+		segment. For a zoned block device, either host-aware or
+		host-managed, chunk_sectors indicates the size in 512B sectors
+		of the zones of the device, with the eventual exception of the
+		last zone of the device which may be smaller.
+
+
+What:		/sys/block/<disk>/queue/crypto/
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		The presence of this subdirectory of /sys/block/<disk>/queue/
+		indicates that the device supports inline encryption.  This
+		subdirectory contains files which describe the inline encryption
+		capabilities of the device.  For more information about inline
+		encryption, refer to Documentation/block/inline-encryption.rst.
+
+
+What:		/sys/block/<disk>/queue/crypto/max_dun_bits
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file shows the maximum length, in bits, of data unit
+		numbers accepted by the device in inline encryption requests.
+
+
+What:		/sys/block/<disk>/queue/crypto/modes/<mode>
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] For each crypto mode (i.e., encryption/decryption
+		algorithm) the device supports with inline encryption, a file
+		will exist at this location.  It will contain a hexadecimal
+		number that is a bitmask of the supported data unit sizes, in
+		bytes, for that crypto mode.
+
+		Currently, the crypto modes that may be supported are:
+
+		   * AES-256-XTS
+		   * AES-128-CBC-ESSIV
+		   * Adiantum
+
+		For example, if a device supports AES-256-XTS inline encryption
+		with data unit sizes of 512 and 4096 bytes, the file
+		/sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and
+		will contain "0x1200".
+
+
+What:		/sys/block/<disk>/queue/crypto/num_keyslots
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file shows the number of keyslots the device has for
+		use with inline encryption.
+
+
+What:		/sys/block/<disk>/queue/dax
+Date:		June 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file indicates whether the device supports Direct
+		Access (DAX), used by CPU-addressable storage to bypass the
+		pagecache.  It shows '1' if true, '0' if not.
+
+
+What:		/sys/block/<disk>/queue/discard_granularity
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Devices that support discard functionality may internally
+		allocate space using units that are bigger than the logical
+		block size. The discard_granularity parameter indicates the size
+		of the internal allocation unit in bytes if reported by the
+		device. Otherwise the discard_granularity will be set to match
+		the device's physical block size. A discard_granularity of 0
+		means that the device does not support discard functionality.
+
+
+What:		/sys/block/<disk>/queue/discard_max_bytes
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RW] While discard_max_hw_bytes is the hardware limit for the
+		device, this setting is the software limit. Some devices exhibit
+		large latencies when large discards are issued, setting this
+		value lower will make Linux issue smaller discards and
+		potentially help reduce latencies induced by large discard
+		operations.
+
+
+What:		/sys/block/<disk>/queue/discard_max_hw_bytes
+Date:		July 2015
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Devices that support discard functionality may have
+		internal limits on the number of bytes that can be trimmed or
+		unmapped in a single operation.  The `discard_max_hw_bytes`
+		parameter is set by the device driver to the maximum number of
+		bytes that can be discarded in a single operation.  Discard
+		requests issued to the device must not exceed this limit.  A
+		`discard_max_hw_bytes` value of 0 means that the device does not
+		support discard functionality.
+
+
+What:		/sys/block/<disk>/queue/discard_zeroes_data
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Will always return 0.  Don't rely on any specific behavior
+		for discards, and don't read this file.
+
+
+What:		/sys/block/<disk>/queue/dma_alignment
+Date:		May 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		Reports the alignment that user space addresses must have to be
+		used for raw block device access with O_DIRECT and other driver
+		specific passthrough mechanisms.
+
+
+What:		/sys/block/<disk>/queue/fua
+Date:		May 2018
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Whether or not the block driver supports the FUA flag for
+		write requests.  FUA stands for Force Unit Access. If the FUA
+		flag is set that means that write requests must bypass the
+		volatile cache of the storage device.
+
+
+What:		/sys/block/<disk>/queue/hw_sector_size
+Date:		January 2008
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the hardware sector size of the device, in bytes.
+
+
+What:		/sys/block/<disk>/queue/independent_access_ranges/
+Date:		October 2021
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] The presence of this sub-directory of the
+		/sys/block/xxx/queue/ directory indicates that the device is
+		capable of executing requests targeting different sector ranges
+		in parallel. For instance, single LUN multi-actuator hard-disks
+		will have an independent_access_ranges directory if the device
+		correctly advertizes the sector ranges of its actuators.
+
+		The independent_access_ranges directory contains one directory
+		per access range, with each range described using the sector
+		(RO) attribute file to indicate the first sector of the range
+		and the nr_sectors (RO) attribute file to indicate the total
+		number of sectors in the range starting from the first sector of
+		the range.  For example, a dual-actuator hard-disk will have the
+		following independent_access_ranges entries.::
+
+			$ tree /sys/block/<disk>/queue/independent_access_ranges/
+			/sys/block/<disk>/queue/independent_access_ranges/
+			|-- 0
+			|   |-- nr_sectors
+			|   `-- sector
+			`-- 1
+			    |-- nr_sectors
+			    `-- sector
+
+		The sector and nr_sectors attributes use 512B sector unit,
+		regardless of the actual block size of the device. Independent
+		access ranges do not overlap and include all sectors within the
+		device capacity. The access ranges are numbered in increasing
+		order of the range start sector, that is, the sector attribute
+		of range 0 always has the value 0.
+
+
+What:		/sys/block/<disk>/queue/io_poll
+Date:		November 2015
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file shows whether polling is enabled (1)
+		or disabled (0).  Writing '0' to this file will disable polling
+		for this device.  Writing any non-zero value will enable this
+		feature.
+
+
+What:		/sys/block/<disk>/queue/io_poll_delay
+Date:		November 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] If polling is enabled, this controls what kind of polling
+		will be performed. It defaults to -1, which is classic polling.
+		In this mode, the CPU will repeatedly ask for completions
+		without giving up any time.  If set to 0, a hybrid polling mode
+		is used, where the kernel will attempt to make an educated guess
+		at when the IO will complete. Based on this guess, the kernel
+		will put the process issuing IO to sleep for an amount of time,
+		before entering a classic poll loop. This mode might be a little
+		slower than pure classic polling, but it will be more efficient.
+		If set to a value larger than 0, the kernel will put the process
+		issuing IO to sleep for this amount of microseconds before
+		entering classic polling.
+
+
+What:		/sys/block/<disk>/queue/io_timeout
+Date:		November 2018
+Contact:	Weiping Zhang <zhangweiping@didiglobal.com>
+Description:
+		[RW] io_timeout is the request timeout in milliseconds. If a
+		request does not complete in this time then the block driver
+		timeout handler is invoked. That timeout handler can decide to
+		retry the request, to fail it or to start a device recovery
+		strategy.
+
+
+What:		/sys/block/<disk>/queue/iostats
+Date:		January 2009
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file is used to control (on/off) the iostats
+		accounting of the disk.
+
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] This is the smallest unit the storage device can address.
+		It is typically 512 bytes.
+
+
+What:		/sys/block/<disk>/queue/max_active_zones
+Date:		July 2020
+Contact:	Niklas Cassel <niklas.cassel@wdc.com>
+Description:
+		[RO] For zoned block devices (zoned attribute indicating
+		"host-managed" or "host-aware"), the sum of zones belonging to
+		any of the zone states: EXPLICIT OPEN, IMPLICIT OPEN or CLOSED,
+		is limited by this value. If this value is 0, there is no limit.
+
+		If the host attempts to exceed this limit, the driver should
+		report this error with BLK_STS_ZONE_ACTIVE_RESOURCE, which user
+		space may see as the EOVERFLOW errno.
+
+
+What:		/sys/block/<disk>/queue/max_discard_segments
+Date:		February 2017
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] The maximum number of DMA scatter/gather entries in a
+		discard request.
+
+
+What:		/sys/block/<disk>/queue/max_hw_sectors_kb
+Date:		September 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the maximum number of kilobytes supported in a
+		single data transfer.
+
+
+What:		/sys/block/<disk>/queue/max_integrity_segments
+Date:		September 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum number of elements in a DMA scatter/gather list
+		with integrity data that will be submitted by the block layer
+		core to the associated block driver.
+
+
+What:		/sys/block/<disk>/queue/max_open_zones
+Date:		July 2020
+Contact:	Niklas Cassel <niklas.cassel@wdc.com>
+Description:
+		[RO] For zoned block devices (zoned attribute indicating
+		"host-managed" or "host-aware"), the sum of zones belonging to
+		any of the zone states: EXPLICIT OPEN or IMPLICIT OPEN, is
+		limited by this value. If this value is 0, there is no limit.
+
+
+What:		/sys/block/<disk>/queue/max_sectors_kb
+Date:		September 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This is the maximum number of kilobytes that the block
+		layer will allow for a filesystem request. Must be smaller than
+		or equal to the maximum size allowed by the hardware. Write 0
+		to use default kernel settings.
+
+
+What:		/sys/block/<disk>/queue/max_segment_size
+Date:		March 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum size in bytes of a single element in a DMA
+		scatter/gather list.
+
+
+What:		/sys/block/<disk>/queue/max_segments
+Date:		March 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum number of elements in a DMA scatter/gather list
+		that is submitted to the associated block driver.
+
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the device can
+		perform without incurring a performance penalty.  For disk
+		drives this is often the physical block size.  For RAID arrays
+		it is often the stripe chunk size.  A properly aligned multiple
+		of minimum_io_size is the preferred request size for workloads
+		where a high number of I/O operations is desired.
+
+
+What:		/sys/block/<disk>/queue/nomerges
+Date:		January 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] Standard I/O elevator operations include attempts to merge
+		contiguous I/Os. For known random I/O loads these attempts will
+		always fail and result in extra cycles being spent in the
+		kernel. This allows one to turn off this behavior on one of two
+		ways: When set to 1, complex merge checks are disabled, but the
+		simple one-shot merges with the previous I/O request are
+		enabled. When set to 2, all merge tries are disabled. The
+		default value is 0 - which enables all types of merge tries.
+
+
+What:		/sys/block/<disk>/queue/nr_requests
+Date:		July 2003
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This controls how many requests may be allocated in the
+		block layer for read or write requests. Note that the total
+		allocated number may be twice this amount, since it applies only
+		to reads or writes (not the accumulated sum).
+
+		To avoid priority inversion through request starvation, a
+		request queue maintains a separate request pool per each cgroup
+		when CONFIG_BLK_CGROUP is enabled, and this parameter applies to
+		each such per-block-cgroup request pool.  IOW, if there are N
+		block cgroups, each request queue may have up to N request
+		pools, each independently regulated by nr_requests.
+
+
+What:		/sys/block/<disk>/queue/nr_zones
+Date:		November 2018
+Contact:	Damien Le Moal <damien.lemoal@wdc.com>
+Description:
+		[RO] nr_zones indicates the total number of zones of a zoned
+		block device ("host-aware" or "host-managed" zone model). For
+		regular block devices, the value is always 0.
+
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Storage devices may report an optimal I/O size, which is
+		the device's preferred unit for sustained I/O.  This is rarely
+		reported for disk drives.  For RAID arrays it is usually the
+		stripe width or the internal track size.  A properly aligned
+		multiple of optimal_io_size is the preferred request size for
+		workloads where sustained throughput is desired.  If no optimal
+		I/O size is reported this file contains 0.
+
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical block
+		size but may be bigger.  One example is SATA drives with 4KB
+		sectors that expose a 512-byte logical block size to the
+		operating system.  For stacked block devices the
+		physical_block_size variable contains the maximum
+		physical_block_size of the component devices.
+
+
+What:		/sys/block/<disk>/queue/read_ahead_kb
+Date:		May 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] Maximum number of kilobytes to read-ahead for filesystems
+		on this block device.
+
+
+What:		/sys/block/<disk>/queue/rotational
+Date:		January 2009
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file is used to stat if the device is of rotational
+		type or non-rotational type.
+
+
+What:		/sys/block/<disk>/queue/rq_affinity
+Date:		September 2008
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] If this option is '1', the block layer will migrate request
+		completions to the cpu "group" that originally submitted the
+		request. For some workloads this provides a significant
+		reduction in CPU cycles due to caching effects.
+
+		For storage configurations that need to maximize distribution of
+		completion processing setting this option to '2' forces the
+		completion to run on the requesting cpu (bypassing the "group"
+		aggregation logic).
+
+
+What:		/sys/block/<disk>/queue/scheduler
+Date:		October 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file will display the current and available
+		IO schedulers for this block device. The currently active IO
+		scheduler will be enclosed in [] brackets. Writing an IO
+		scheduler name to this file will switch control of this block
+		device to that new IO scheduler. Note that writing an IO
+		scheduler name to this file will attempt to load that IO
+		scheduler module, if it isn't already present in the system.
+
+
+What:		/sys/block/<disk>/queue/stable_writes
+Date:		September 2020
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file will contain '1' if memory must not be modified
+		while it is being used in a write request to this device.  When
+		this is the case and the kernel is performing writeback of a
+		page, the kernel will wait for writeback to complete before
+		allowing the page to be modified again, rather than allowing
+		immediate modification as is normally the case.  This
+		restriction arises when the device accesses the memory multiple
+		times where the same data must be seen every time -- for
+		example, once to calculate a checksum and once to actually write
+		the data.  If no such restriction exists, this file will contain
+		'0'.  This file is writable for testing purposes.
+
+
+What:		/sys/block/<disk>/queue/throttle_sample_time
+Date:		March 2017
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This is the time window that blk-throttle samples data, in
+		millisecond.  blk-throttle makes decision based on the
+		samplings. Lower time means cgroups have more smooth throughput,
+		but higher CPU overhead. This exists only when
+		CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
+
+
+What:		/sys/block/<disk>/queue/virt_boundary_mask
+Date:		April 2021
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file shows the I/O segment memory alignment mask for
+		the block device.  I/O requests to this device will be split
+		between segments wherever either the memory address of the end
+		of the previous segment or the memory address of the beginning
+		of the current segment is not aligned to virt_boundary_mask + 1
+		bytes.
+
+
+What:		/sys/block/<disk>/queue/wbt_lat_usec
+Date:		November 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] If the device is registered for writeback throttling, then
+		this file shows the target minimum read latency. If this latency
+		is exceeded in a given window of time (see wb_window_usec), then
+		the writeback throttling will start scaling back writes. Writing
+		a value of '0' to this file disables the feature. Writing a
+		value of '-1' to this file resets the value to the default
+		setting.
+
+
+What:		/sys/block/<disk>/queue/write_cache
+Date:		April 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file will display whether the device has
+		write back caching enabled or not. It will return "write back"
+		for the former case, and "write through" for the latter. Writing
+		to this file can change the kernels view of the device, but it
+		doesn't alter the device state. This means that it might not be
+		safe to toggle the setting from "write back" to "write through",
+		since that will also eliminate cache flushes issued by the
+		kernel.
+
+
+What:		/sys/block/<disk>/queue/write_same_max_bytes
+Date:		January 2012
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Some devices support a write same operation in which a
+		single data block can be written to a range of several
+		contiguous blocks on storage. This can be used to wipe areas on
+		disk or to initialize drives in a RAID configuration.
+		write_same_max_bytes indicates how many bytes can be written in
+		a single write same command. If write_same_max_bytes is 0, write
+		same is not supported by the device.
+
+
+What:		/sys/block/<disk>/queue/write_zeroes_max_bytes
+Date:		November 2016
+Contact:	Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
+Description:
+		[RO] Devices that support write zeroes operation in which a
+		single request can be issued to zero out the range of contiguous
+		blocks on storage without having any payload in the request.
+		This can be used to optimize writing zeroes to the devices.
+		write_zeroes_max_bytes indicates how many bytes can be written
+		in a single write zeroes command. If write_zeroes_max_bytes is
+		0, write zeroes is not supported by the device.
+
+
+What:		/sys/block/<disk>/queue/zone_append_max_bytes
+Date:		May 2020
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the maximum number of bytes that can be written to
+		a sequential zone of a zoned block device using a zone append
+		write operation (REQ_OP_ZONE_APPEND). This value is always 0 for
+		regular block devices.
+
+
+What:		/sys/block/<disk>/queue/zone_write_granularity
+Date:		January 2021
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This indicates the alignment constraint, in bytes, for
+		write operations in sequential zones of zoned block devices
+		(devices with a zoned attributed that reports "host-managed" or
+		"host-aware"). This value is always 0 for regular block devices.
+
+
+What:		/sys/block/<disk>/queue/zoned
+Date:		September 2016
+Contact:	Damien Le Moal <damien.lemoal@wdc.com>
+Description:
+		[RO] zoned indicates if the device is a zoned block device and
+		the zone model of the device if it is indeed zoned.  The
+		possible values indicated by zoned are "none" for regular block
+		devices and "host-aware" or "host-managed" for zoned block
+		devices. The characteristics of host-aware and host-managed
+		zoned block devices are described in the ZBC (Zoned Block
+		Commands) and ZAC (Zoned Device ATA Command Set) standards.
+		These standards also define the "drive-managed" zone model.
+		However, since drive-managed zoned block devices do not support
+		zone commands, they will be treated as regular block devices and
+		zoned will report "none".
+
+
+What:		/sys/block/<disk>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/stat files displays the I/O
+		statistics of disk <disk>. They contain 11 fields:
+
+		==  ==============================================
+		 1  reads completed successfully
+		 2  reads merged
+		 3  sectors read
+		 4  time spent reading (ms)
+		 5  writes completed
+		 6  writes merged
+		 7  sectors written
+		 8  time spent writing (ms)
+		 9  I/Os currently in progress
+		10  time spent doing I/Os (ms)
+		11  weighted time spent doing I/Os (ms)
+		12  discards completed
+		13  discards merged
+		14  sectors discarded
+		15  time spent discarding (ms)
+		16  flush requests completed
+		17  time spent flushing (ms)
+		==  ==============================================
+
+		For more details refer Documentation/admin-guide/iostats.rst