Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 190 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
new file mode 100644
index 000000000..db17fc8a0
--- /dev/null
+++ b/Documentation/ABI/testing/ima_policy
@@ -0,0 +1,190 @@
+What:		/sys/kernel/security/*/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		IMA appraisal, if configured, uses these file measurements
+		for local measurement appraisal.
+
+		::
+
+		  rule format: action [condition ...]
+
+		  action: measure | dont_measure | appraise | dont_appraise |
+			  audit | hash | dont_hash
+		  condition:= base | lsm  [option]
+			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [fsname=]
+				[uid=] [euid=] [gid=] [egid=]
+				[fowner=] [fgroup=]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+			option:	[digest_type=] [template=] [permit_directio]
+				[appraise_type=] [appraise_flag=]
+				[appraise_algos=] [keyrings=]
+		  base:
+			func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
+				[FIRMWARE_CHECK]
+				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
+				[KEXEC_CMDLINE] [KEY_CHECK] [CRITICAL_DATA]
+				[SETXATTR_CHECK]
+			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
+			       [[^]MAY_EXEC]
+			fsmagic:= hex value
+			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
+			uid:= decimal value
+			euid:= decimal value
+			gid:= decimal value
+			egid:= decimal value
+			fowner:= decimal value
+			fgroup:= decimal value
+		  lsm:  are LSM specific
+		  option:
+			appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
+			    where 'imasig' is the original or the signature
+				format v2.
+			    where 'modsig' is an appended signature,
+			    where 'sigv3' is the signature format v3. (Currently
+				limited to fsverity digest based signatures
+				stored in security.ima xattr. Requires
+				specifying "digest_type=verity" first.)
+
+			appraise_flag:= [check_blacklist]
+			Currently, blacklist check is only for files signed with appended
+			signature.
+			digest_type:= verity
+			    Require fs-verity's file digest instead of the
+			    regular IMA file hash.
+			keyrings:= list of keyrings
+			(eg, .builtin_trusted_keys|.ima). Only valid
+			when action is "measure" and func is KEY_CHECK.
+			template:= name of a defined IMA template type
+			(eg, ima-ng). Only valid when action is "measure".
+			pcr:= decimal value
+			label:= [selinux]|[kernel_info]|[data_label]
+			data_label:= a unique string used for grouping and limiting critical data.
+			For example, "selinux" to measure critical data for SELinux.
+			appraise_algos:= comma-separated list of hash algorithms
+			For example, "sha256,sha512" to only accept to appraise
+			files where the security.ima xattr was hashed with one
+			of these two algorithms.
+
+		  default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			dont_appraise fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			dont_appraise fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			dont_appraise fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			dont_appraise fsmagic=0x01021994
+			# RAMFS_MAGIC
+			dont_appraise fsmagic=0x858458f6
+			# DEVPTS_SUPER_MAGIC
+			dont_measure fsmagic=0x1cd1
+			dont_appraise fsmagic=0x1cd1
+			# BINFMTFS_MAGIC
+			dont_measure fsmagic=0x42494e4d
+			dont_appraise fsmagic=0x42494e4d
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+			dont_appraise fsmagic=0x73636673
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
+			# CGROUP_SUPER_MAGIC
+			dont_measure fsmagic=0x27e0eb
+			dont_appraise fsmagic=0x27e0eb
+			# NSFS_MAGIC
+			dont_measure fsmagic=0x6e736673
+			dont_appraise fsmagic=0x6e736673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=FILE_CHECK mask=MAY_READ uid=0
+			measure func=MODULE_CHECK
+			measure func=FIRMWARE_CHECK
+			appraise fowner=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in do_filp_open.  The default appraisal
+		policy appraises all files owned by root.
+
+		Examples of LSM specific definitions:
+
+		SELinux::
+
+			dont_measure obj_type=var_log_t
+			dont_appraise obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			dont_appraise obj_type=auditd_log_t
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
+
+		Smack::
+
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
+
+		Example of measure rules using alternate PCRs::
+
+			measure func=KEXEC_KERNEL_CHECK pcr=4
+			measure func=KEXEC_INITRAMFS_CHECK pcr=5
+
+		Example of appraise rule allowing modsig appended signatures:
+
+			appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig
+
+		Example of measure rule using KEY_CHECK to measure all keys:
+
+			measure func=KEY_CHECK
+
+		Example of measure rule using KEY_CHECK to only measure
+		keys added to .builtin_trusted_keys or .ima keyring:
+
+			measure func=KEY_CHECK keyrings=.builtin_trusted_keys|.ima
+
+		Example of the special SETXATTR_CHECK appraise rule, that
+		restricts the hash algorithms allowed when writing to the
+		security.ima xattr of a file:
+
+			appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
+
+		Example of a 'measure' rule requiring fs-verity's digests
+		with indication of type of digest in the measurement list.
+
+			measure func=FILE_CHECK digest_type=verity \
+				template=ima-ngv2
+
+		Example of 'measure' and 'appraise' rules requiring fs-verity
+		signatures (format version 3) stored in security.ima xattr.
+
+		The 'measure' rule specifies the 'ima-sigv3' template option,
+		which includes the indication of type of digest and the file
+		signature in the measurement list.
+
+			measure func=BPRM_CHECK digest_type=verity \
+				template=ima-sigv3
+
+
+		The 'appraise' rule specifies the type and signature format
+		version (sigv3) required.
+
+			appraise func=BPRM_CHECK digest_type=verity \
+				appraise_type=sigv3
+
+		All of these policy rules could, for example, be constrained
+		either based on a filesystem's UUID (fsuuid) or based on LSM
+		labels.