Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 370 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
new file mode 100644
index 000000000..76ab3e1fe
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -0,0 +1,370 @@
+What:		/sys/bus/thunderbolt/devices/.../domainX/boot_acl
+Date:		Jun 2018
+KernelVersion:	4.17
+Contact:	thunderbolt-software@lists.01.org
+Description:	Holds a comma separated list of device unique_ids that
+		are allowed to be connected automatically during system
+		startup (e.g boot devices). The list always contains
+		maximum supported number of unique_ids where unused
+		entries are empty. This allows the userspace software
+		to determine how many entries the controller supports.
+		If there are multiple controllers, each controller has
+		its own ACL list and size may be different between the
+		controllers.
+
+		System BIOS may have an option "Preboot ACL" or similar
+		that needs to be selected before this list is taken into
+		consideration.
+
+		Software always updates a full list in each write.
+
+		If a device is authorized automatically during boot its
+		boot attribute is set to 1.
+
+What:		/sys/bus/thunderbolt/devices/.../domainX/deauthorization
+Date:		May 2021
+KernelVersion:	5.12
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This attribute tells whether the system supports
+		de-authorization of devices. Value of 1 means user can
+		de-authorize PCIe tunnel by writing 0 to authorized
+		attribute under each device.
+
+What:		/sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
+Date:		Mar 2019
+KernelVersion:	4.21
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute tells whether the system uses IOMMU
+		for DMA protection. Value of 1 means IOMMU is used 0 means
+		it is not (DMA protection is solely based on Thunderbolt
+		security levels).
+
+What:		/sys/bus/thunderbolt/devices/.../domainX/security
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute holds current Thunderbolt security level
+		set by the system BIOS. Possible values are:
+
+		=======  ==================================================
+		none     All devices are automatically authorized
+		user     Devices are only authorized based on writing
+		         appropriate value to the authorized attribute
+		secure   Require devices that support secure connect at
+			 minimum. User needs to authorize each device.
+		dponly   Automatically tunnel Display port (and USB). No
+			 PCIe tunnels are created.
+		usbonly  Automatically tunnel USB controller of the
+			 connected Thunderbolt dock (and Display Port). All
+			 PCIe links downstream of the dock are removed.
+		nopcie   USB4 system where PCIe tunneling is disabled from
+			 the BIOS.
+		=======  ==================================================
+
+What:		/sys/bus/thunderbolt/devices/.../authorized
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute is used to authorize Thunderbolt devices
+		after they have been connected. If the device is not
+		authorized, no PCIe devices are available to the system.
+
+		Contents of this attribute will be 0 when the device is not
+		yet authorized.
+
+		Possible values are supported:
+
+		==  ===================================================
+		0   The device will be de-authorized (only supported if
+		    deauthorization attribute under domain contains 1)
+		1   The device will be authorized and connected
+		==  ===================================================
+
+		When key attribute contains 32 byte hex string the possible
+		values are:
+
+		==  ========================================================
+		0   The device will be de-authorized (only supported if
+		    deauthorization attribute under domain contains 1)
+		1   The 32 byte hex string is added to the device NVM and
+		    the device is authorized.
+		2   Send a challenge based on the 32 byte hex string. If the
+		    challenge response from device is valid, the device is
+		    authorized. In case of failure errno will be ENOKEY if
+		    the device did not contain a key at all, and
+		    EKEYREJECTED if the challenge response did not match.
+		==  ========================================================
+
+What:		/sys/bus/thunderbolt/devices/.../boot
+Date:		Jun 2018
+KernelVersion:	4.17
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains 1 if Thunderbolt device was already
+		authorized on boot and 0 otherwise.
+
+What:		/sys/bus/thunderbolt/devices/.../generation
+Date:		Jan 2020
+KernelVersion:	5.5
+Contact:	Christian Kellner <christian@kellner.me>
+Description:	This attribute contains the generation of the Thunderbolt
+		controller associated with the device. It will contain 4
+		for USB4.
+
+What:		/sys/bus/thunderbolt/devices/.../key
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	When a devices supports Thunderbolt secure connect it will
+		have this attribute. Writing 32 byte hex string changes
+		authorization to use the secure connection method instead.
+		Writing an empty string clears the key and regular connection
+		method can be used again.
+
+What:		/sys/bus/thunderbolt/devices/.../device
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains id of this device extracted from
+		the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../device_name
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains name of this device extracted from
+		the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../maxhopid
+Date:		Jul 2021
+KernelVersion:	5.13
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Only set for XDomains. The maximum HopID the other host
+		supports as its input HopID.
+
+What:		/sys/bus/thunderbolt/devices/.../rx_speed
+Date:		Jan 2020
+KernelVersion:	5.5
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This attribute reports the device RX speed per lane.
+		All RX lanes run at the same speed.
+
+What:		/sys/bus/thunderbolt/devices/.../rx_lanes
+Date:		Jan 2020
+KernelVersion:	5.5
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This attribute reports number of RX lanes the device is
+		using simultaneously through its upstream port.
+
+What:		/sys/bus/thunderbolt/devices/.../tx_speed
+Date:		Jan 2020
+KernelVersion:	5.5
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This attribute reports the TX speed per lane.
+		All TX lanes run at the same speed.
+
+What:		/sys/bus/thunderbolt/devices/.../tx_lanes
+Date:		Jan 2020
+KernelVersion:	5.5
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This attribute reports number of TX lanes the device is
+		using simultaneously through its upstream port.
+
+What:		/sys/bus/thunderbolt/devices/.../vendor
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains vendor id of this device extracted
+		from the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../vendor_name
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains vendor name of this device extracted
+		from the device DROM.
+
+What:		/sys/bus/thunderbolt/devices/.../unique_id
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	This attribute contains unique_id string of this device.
+		This is either read from hardware registers (UUID on
+		newer hardware) or based on UID from the device DROM.
+		Can be used to uniquely identify particular device.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_version
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	If the device has upgradeable firmware the version
+		number is available here. Format: %x.%x, major.minor.
+		If the device is in safe mode reading the file returns
+		-ENODATA instead as the NVM version is not available.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate
+Date:		Sep 2017
+KernelVersion:	4.13
+Contact:	thunderbolt-software@lists.01.org
+Description:	When new NVM image is written to the non-active NVM
+		area (through non_activeX NVMem device), the
+		authentication procedure is started by writing to
+		this file.
+		If everything goes well, the device is
+		restarted with the new NVM firmware. If the image
+		verification fails an error code is returned instead.
+
+		This file will accept writing values "1", "2" or "3".
+
+		- Writing "1" will flush the image to the storage
+		  area and authenticate the image in one action.
+		- Writing "2" will run some basic validation on the image
+		  and flush it to the storage area.
+		- Writing "3" will authenticate the image that is
+		  currently written in the storage area. This is only
+		  supported with USB4 devices and retimers.
+
+		When read holds status of the last authentication
+		operation if an error occurred during the process. This
+		is directly the status value from the DMA configuration
+		based mailbox before the device is power cycled. Writing
+		0 here clears the status.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mario Limonciello <mario.limonciello@outlook.com>
+Description:	For supported devices, automatically authenticate the new Thunderbolt
+		image when the device is disconnected from the host system.
+
+		This file will accept writing values "1" or "2"
+
+		- Writing "1" will flush the image to the storage
+		  area and prepare the device for authentication on disconnect.
+		- Writing "2" will run some basic validation on the image
+		  and flush it to the storage area.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/key
+Date:		Jan 2018
+KernelVersion:	4.15
+Contact:	thunderbolt-software@lists.01.org
+Description:	This contains name of the property directory the XDomain
+		service exposes. This entry describes the protocol in
+		question. Following directories are already reserved by
+		the Apple XDomain specification:
+
+		========  ===============================================
+		network   IP/ethernet over Thunderbolt
+		targetdm  Target disk mode protocol over Thunderbolt
+		extdisp   External display mode protocol over Thunderbolt
+		========  ===============================================
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
+Date:		Jan 2018
+KernelVersion:	4.15
+Contact:	thunderbolt-software@lists.01.org
+Description:	Stores the same MODALIAS value emitted by uevent for
+		the XDomain service. Format: tbtsvc:kSpNvNrN
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid
+Date:		Jan 2018
+KernelVersion:	4.15
+Contact:	thunderbolt-software@lists.01.org
+Description:	This contains XDomain protocol identifier the XDomain
+		service supports.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers
+Date:		Jan 2018
+KernelVersion:	4.15
+Contact:	thunderbolt-software@lists.01.org
+Description:	This contains XDomain protocol version the XDomain
+		service supports.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs
+Date:		Jan 2018
+KernelVersion:	4.15
+Contact:	thunderbolt-software@lists.01.org
+Description:	This contains XDomain software version the XDomain
+		service supports.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns
+Date:		Jan 2018
+KernelVersion:	4.15
+Contact:	thunderbolt-software@lists.01.org
+Description:	This contains XDomain service specific settings as
+		bitmask. Format: %x
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/connector
+Date:		April 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Symlink to the USB Type-C connector. This link is only
+		created when USB Type-C Connector Class is enabled,
+		and only if the system firmware is capable of
+		describing the connection between a port and its
+		connector.
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/link
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Returns the current link mode. Possible values are
+		"usb4", "tbt" and "none".
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/offline
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Rajmohan Mani <rajmohan.mani@intel.com>
+Description:	Writing 1 to this attribute puts the USB4 port into
+		offline mode. Only allowed when there is nothing
+		connected to the port (link attribute returns "none").
+		Once the port is in offline mode it does not receive any
+		hotplug events. This is used to update NVM firmware of
+		on-board retimers. Writing 0 puts the port back to
+		online mode.
+
+		This attribute is only visible if the platform supports
+		powering on retimers when there is no cable connected.
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/rescan
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Rajmohan Mani <rajmohan.mani@intel.com>
+Description:	When the USB4 port is in offline mode writing 1 to this
+		attribute forces rescan of the sideband for on-board
+		retimers. Each retimer appear under the USB4 port as if
+		the USB4 link was up. These retimers act in the same way
+		as if the cable was connected so upgrading their NVM
+		firmware can be done the usual way.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/device
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Retimer device identifier read from the hardware.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	When new NVM image is written to the non-active NVM
+		area (through non_activeX NVMem device), the
+		authentication procedure is started by writing 1 to
+		this file. If everything goes well, the device is
+		restarted with the new NVM firmware. If the image
+		verification fails an error code is returned instead.
+
+		When read holds status of the last authentication
+		operation if an error occurred during the process.
+		Format: %x.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Holds retimer NVM version number. Format: %x.%x, major.minor.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Retimer vendor identifier read from the hardware.