Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 453 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 000000000..475b9a372
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,453 @@
+What:		/sys/class/regulator/.../state
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		state. This reports the regulator enable control, for
+		regulators which can report that input value.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator output is ON and is supplying
+		power to the system (assuming no error prevents it).
+
+		'disabled' means the regulator output is OFF and is not
+		supplying power to the system (unless some non-Linux
+		control has enabled it).
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.
+
+		NOTE: this field can be used in conjunction with microvolts
+		or microamps to determine configured regulator output levels.
+
+
+What:		/sys/class/regulator/.../status
+Description:
+		Some regulator directories will contain a field called
+		"status". This reports the current regulator status, for
+		regulators which can report that output value.
+
+		This will be one of the following strings:
+
+			- off
+			- on
+			- error
+			- fast
+			- normal
+			- idle
+			- standby
+
+		"off" means the regulator is not supplying power to the
+		system.
+
+		"on" means the regulator is supplying power to the system,
+		and the regulator can't report a detailed operation mode.
+
+		"error" indicates an out-of-regulation status such as being
+		disabled due to thermal shutdown, or voltage being unstable
+		because of problems with the input power supply.
+
+		"fast", "normal", "idle", and "standby" are all detailed
+		regulator operation modes (described elsewhere).  They
+		imply "on", but provide more detail.
+
+		Note that regulator status is a function of many inputs,
+		not limited to control inputs from Linux.  For example,
+		the actual load presented may trigger "error" status; or
+		a regulator may be enabled by another user, even though
+		Linux did not enable it.
+
+
+What:		/sys/class/regulator/.../type
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		type. This holds the regulator type.
+
+		This will be one of the following strings:
+
+		- 'voltage'
+		- 'current'
+		- 'unknown'
+
+		'voltage' means the regulator output voltage can be controlled
+		by software.
+
+		'current' means the regulator output current limit can be
+		controlled by software.
+
+		'unknown' means software cannot control either voltage or
+		current limit.
+
+
+What:		/sys/class/regulator/.../microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		microvolts. This holds the regulator output voltage setting
+		measured in microvolts (i.e. E-6 Volts), for regulators
+		which can report the control input for voltage.
+
+		NOTE: This value should not be used to determine the regulator
+		output voltage level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		microamps. This holds the regulator output current limit
+		setting measured in microamps (i.e. E-6 Amps), for regulators
+		which can report the control input for a current limit.
+
+		NOTE: This value should not be used to determine the regulator
+		output current level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../opmode
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		opmode. This holds the current regulator operating mode,
+		for regulators which can report that control input value.
+
+		The opmode value can be one of the following strings:
+
+		- 'fast'
+		- 'normal'
+		- 'idle'
+		- 'standby'
+		- 'unknown'
+
+		The modes are described in include/linux/regulator/consumer.h
+
+		NOTE: This value should not be used to determine the regulator
+		output operating mode as this value is the same regardless of
+		whether the regulator is enabled or disabled.  A "status"
+		attribute may be available to determine the actual mode.
+
+
+What:		/sys/class/regulator/.../min_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		min_microvolts. This holds the minimum safe working regulator
+		output voltage setting for this domain measured in microvolts,
+		for regulators which support voltage constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		max_microvolts. This holds the maximum safe working regulator
+		output voltage setting for this domain measured in microvolts,
+		for regulators which support voltage constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../min_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		min_microamps. This holds the minimum safe working regulator
+		output current limit setting for this domain measured in
+		microamps, for regulators which support current constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		max_microamps. This holds the maximum safe working regulator
+		output current limit setting for this domain measured in
+		microamps, for regulators which support current constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../name
+Date:		October 2008
+KernelVersion:	2.6.28
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		name. This holds a string identifying the regulator for
+		display purposes.
+
+		NOTE: this will be empty if no suitable name is provided
+		by platform or regulator drivers.
+
+
+What:		/sys/class/regulator/.../num_users
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		num_users. This holds the number of consumer devices that
+		have called regulator_enable() on this regulator.
+
+
+What:		/sys/class/regulator/.../requested_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		requested_microamps. This holds the total requested load
+		current in microamps for this regulator from all its consumer
+		devices.
+
+
+What:		/sys/class/regulator/.../parent
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a link called parent.
+		This points to the parent or supply regulator if one exists.
+
+What:		/sys/class/regulator/.../suspend_mem_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to memory, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_disk_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to disk, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_standby_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to standby, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_mem_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		memory, for regulators implementing suspend mode
+		configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_disk_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to disk,
+		for regulators implementing suspend mode configuration
+		constraints.
+
+What:		/sys/class/regulator/.../suspend_standby_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		standby, for regulators implementing suspend mode
+		configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_mem_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_state. This holds the regulator operating state
+		when suspended to memory, for regulators implementing suspend
+		configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../suspend_disk_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_state. This holds the regulator operating state
+		when suspended to disk, for regulators implementing
+		suspend configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../suspend_standby_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_state. This holds the regulator operating
+		state when suspended to standby, for regulators implementing
+		suspend configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		- 'enabled'
+		- 'disabled'
+		- 'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.
+
+What:		/sys/class/regulator/.../under_voltage
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage.  This indicates if the device reports an
+		under-voltage fault (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current.  This indicates if the device reports an
+		over-current fault (1) or not (0).
+
+What:		/sys/class/regulator/.../regulation_out
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		regulation_out.  This indicates if the device reports an
+		out-of-regulation fault (1) or not (0).
+
+What:		/sys/class/regulator/.../fail
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		fail.  This indicates if the device reports an output failure
+		(1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp.  This indicates if the device reports an
+		over-temperature fault (1) or not (0).
+
+What:		/sys/class/regulator/.../under_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage_warn.  This indicates if the device reports an
+		under-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current_warn.  This indicates if the device reports an
+		over-current warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_voltage_warn.  This indicates if the device reports an
+		over-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp_warn.  This indicates if the device reports an
+		over-temperature warning (1) or not (0).