Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 277 insertions, 0 deletions

diff --git a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
new file mode 100644
index 000000000..76673affd
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
@@ -0,0 +1,277 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+TAA - TSX Asynchronous Abort
+======================================
+
+TAA is a hardware vulnerability that allows unprivileged speculative access to
+data which is available in various CPU internal buffers by using asynchronous
+aborts within an Intel TSX transactional region.
+
+Affected processors
+-------------------
+
+This vulnerability only affects Intel processors that support Intel
+Transactional Synchronization Extensions (TSX) when the TAA_NO bit (bit 8)
+is 0 in the IA32_ARCH_CAPABILITIES MSR.  On processors where the MDS_NO bit
+(bit 5) is 0 in the IA32_ARCH_CAPABILITIES MSR, the existing MDS mitigations
+also mitigate against TAA.
+
+Whether a processor is affected or not can be read out from the TAA
+vulnerability file in sysfs. See :ref:`tsx_async_abort_sys_info`.
+
+Related CVEs
+------------
+
+The following CVE entry is related to this TAA issue:
+
+   ==============  =====  ===================================================
+   CVE-2019-11135  TAA    TSX Asynchronous Abort (TAA) condition on some
+                          microprocessors utilizing speculative execution may
+                          allow an authenticated user to potentially enable
+                          information disclosure via a side channel with
+                          local access.
+   ==============  =====  ===================================================
+
+Problem
+-------
+
+When performing store, load or L1 refill operations, processors write
+data into temporary microarchitectural structures (buffers). The data in
+those buffers can be forwarded to load operations as an optimization.
+
+Intel TSX is an extension to the x86 instruction set architecture that adds
+hardware transactional memory support to improve performance of multi-threaded
+software. TSX lets the processor expose and exploit concurrency hidden in an
+application due to dynamically avoiding unnecessary synchronization.
+
+TSX supports atomic memory transactions that are either committed (success) or
+aborted. During an abort, operations that happened within the transactional region
+are rolled back. An asynchronous abort takes place, among other options, when a
+different thread accesses a cache line that is also used within the transactional
+region when that access might lead to a data race.
+
+Immediately after an uncompleted asynchronous abort, certain speculatively
+executed loads may read data from those internal buffers and pass it to dependent
+operations. This can be then used to infer the value via a cache side channel
+attack.
+
+Because the buffers are potentially shared between Hyper-Threads cross
+Hyper-Thread attacks are possible.
+
+The victim of a malicious actor does not need to make use of TSX. Only the
+attacker needs to begin a TSX transaction and raise an asynchronous abort
+which in turn potentially leaks data stored in the buffers.
+
+More detailed technical information is available in the TAA specific x86
+architecture section: :ref:`Documentation/x86/tsx_async_abort.rst <tsx_async_abort>`.
+
+
+Attack scenarios
+----------------
+
+Attacks against the TAA vulnerability can be implemented from unprivileged
+applications running on hosts or guests.
+
+As for MDS, the attacker has no control over the memory addresses that can
+be leaked. Only the victim is responsible for bringing data to the CPU. As
+a result, the malicious actor has to sample as much data as possible and
+then postprocess it to try to infer any useful information from it.
+
+A potential attacker only has read access to the data. Also, there is no direct
+privilege escalation by using this technique.
+
+
+.. _tsx_async_abort_sys_info:
+
+TAA system information
+-----------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current TAA status
+of mitigated systems. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - 'Vulnerable'
+     - The CPU is affected by this vulnerability and the microcode and kernel mitigation are not applied.
+   * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+     - The system tries to clear the buffers but the microcode might not support the operation.
+   * - 'Mitigation: Clear CPU buffers'
+     - The microcode has been updated to clear the buffers. TSX is still enabled.
+   * - 'Mitigation: TSX disabled'
+     - TSX is disabled.
+   * - 'Not affected'
+     - The CPU is not affected by this issue.
+
+.. _ucode_needed:
+
+Best effort mitigation mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If the processor is vulnerable, but the availability of the microcode-based
+mitigation mechanism is not advertised via CPUID the kernel selects a best
+effort mitigation mode.  This mode invokes the mitigation instructions
+without a guarantee that they clear the CPU buffers.
+
+This is done to address virtualization scenarios where the host has the
+microcode update applied, but the hypervisor is not yet updated to expose the
+CPUID to the guest. If the host has updated microcode the protection takes
+effect; otherwise a few CPU cycles are wasted pointlessly.
+
+The state in the tsx_async_abort sysfs file reflects this situation
+accordingly.
+
+
+Mitigation mechanism
+--------------------
+
+The kernel detects the affected CPUs and the presence of the microcode which is
+required. If a CPU is affected and the microcode is available, then the kernel
+enables the mitigation by default.
+
+
+The mitigation can be controlled at boot time via a kernel command line option.
+See :ref:`taa_mitigation_control_command_line`.
+
+Virtualization mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Affected systems where the host has TAA microcode and TAA is mitigated by
+having disabled TSX previously, are not vulnerable regardless of the status
+of the VMs.
+
+In all other cases, if the host either does not have the TAA microcode or
+the kernel is not mitigated, the system might be vulnerable.
+
+
+.. _taa_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+The kernel command line allows to control the TAA mitigations at boot time with
+the option "tsx_async_abort=". The valid arguments for this option are:
+
+  ============  =============================================================
+  off		This option disables the TAA mitigation on affected platforms.
+                If the system has TSX enabled (see next parameter) and the CPU
+                is affected, the system is vulnerable.
+
+  full	        TAA mitigation is enabled. If TSX is enabled, on an affected
+                system it will clear CPU buffers on ring transitions. On
+                systems which are MDS-affected and deploy MDS mitigation,
+                TAA is also mitigated. Specifying this option on those
+                systems will have no effect.
+
+  full,nosmt    The same as tsx_async_abort=full, with SMT disabled on
+                vulnerable CPUs that have TSX enabled. This is the complete
+                mitigation. When TSX is disabled, SMT is not disabled because
+                CPU is not vulnerable to cross-thread TAA attacks.
+  ============  =============================================================
+
+Not specifying this option is equivalent to "tsx_async_abort=full". For
+processors that are affected by both TAA and MDS, specifying just
+"tsx_async_abort=off" without an accompanying "mds=off" will have no
+effect as the same mitigation is used for both vulnerabilities.
+
+The kernel command line also allows to control the TSX feature using the
+parameter "tsx=" on CPUs which support TSX control. MSR_IA32_TSX_CTRL is used
+to control the TSX feature and the enumeration of the TSX feature bits (RTM
+and HLE) in CPUID.
+
+The valid options are:
+
+  ============  =============================================================
+  off		Disables TSX on the system.
+
+                Note that this option takes effect only on newer CPUs which are
+                not vulnerable to MDS, i.e., have MSR_IA32_ARCH_CAPABILITIES.MDS_NO=1
+                and which get the new IA32_TSX_CTRL MSR through a microcode
+                update. This new MSR allows for the reliable deactivation of
+                the TSX functionality.
+
+  on		Enables TSX.
+
+                Although there are mitigations for all known security
+                vulnerabilities, TSX has been known to be an accelerator for
+                several previous speculation-related CVEs, and so there may be
+                unknown security risks associated with leaving it enabled.
+
+  auto		Disables TSX if X86_BUG_TAA is present, otherwise enables TSX
+                on the system.
+  ============  =============================================================
+
+Not specifying this option is equivalent to "tsx=off".
+
+The following combinations of the "tsx_async_abort" and "tsx" are possible. For
+affected platforms tsx=auto is equivalent to tsx=off and the result will be:
+
+  =========  ==========================   =========================================
+  tsx=on     tsx_async_abort=full         The system will use VERW to clear CPU
+                                          buffers. Cross-thread attacks are still
+					  possible on SMT machines.
+  tsx=on     tsx_async_abort=full,nosmt   As above, cross-thread attacks on SMT
+                                          mitigated.
+  tsx=on     tsx_async_abort=off          The system is vulnerable.
+  tsx=off    tsx_async_abort=full         TSX might be disabled if microcode
+                                          provides a TSX control MSR. If so,
+					  system is not vulnerable.
+  tsx=off    tsx_async_abort=full,nosmt   Ditto
+  tsx=off    tsx_async_abort=off          ditto
+  =========  ==========================   =========================================
+
+
+For unaffected platforms "tsx=on" and "tsx_async_abort=full" does not clear CPU
+buffers.  For platforms without TSX control (MSR_IA32_ARCH_CAPABILITIES.MDS_NO=0)
+"tsx" command line argument has no effect.
+
+For the affected platforms below table indicates the mitigation status for the
+combinations of CPUID bit MD_CLEAR and IA32_ARCH_CAPABILITIES MSR bits MDS_NO
+and TSX_CTRL_MSR.
+
+  =======  =========  =============  ========================================
+  MDS_NO   MD_CLEAR   TSX_CTRL_MSR   Status
+  =======  =========  =============  ========================================
+    0          0            0        Vulnerable (needs microcode)
+    0          1            0        MDS and TAA mitigated via VERW
+    1          1            0        MDS fixed, TAA vulnerable if TSX enabled
+                                     because MD_CLEAR has no meaning and
+                                     VERW is not guaranteed to clear buffers
+    1          X            1        MDS fixed, TAA can be mitigated by
+                                     VERW or TSX_CTRL_MSR
+  =======  =========  =============  ========================================
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace and guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If all user space applications are from a trusted source and do not execute
+untrusted code which is supplied externally, then the mitigation can be
+disabled. The same applies to virtualized environments with trusted guests.
+
+
+2. Untrusted userspace and guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If there are untrusted applications or guests on the system, enabling TSX
+might allow a malicious actor to leak data from the host or from other
+processes running on the same physical core.
+
+If the microcode is available and the TSX is disabled on the host, attacks
+are prevented in a virtualized environment as well, even if the VMs do not
+explicitly enable the mitigation.
+
+
+.. _taa_default_mitigations:
+
+Default mitigations
+-------------------
+
+The kernel's default action for vulnerable processors is:
+
+  - Deploy TSX disable mitigation (tsx_async_abort=full tsx=off).