Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 271 insertions, 0 deletions

diff --git a/Documentation/admin-guide/laptops/asus-laptop.rst b/Documentation/admin-guide/laptops/asus-laptop.rst
new file mode 100644
index 000000000..95176321a
--- /dev/null
+++ b/Documentation/admin-guide/laptops/asus-laptop.rst
@@ -0,0 +1,271 @@
+==================
+Asus Laptop Extras
+==================
+
+Version 0.1
+
+August 6, 2009
+
+Corentin Chary <corentincj@iksaif.net>
+http://acpi4asus.sf.net/
+
+ This driver provides support for extra features of ACPI-compatible ASUS laptops.
+ It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
+ VICTOR XP7210 for example). It makes all the extra buttons generate input
+ events (like keyboards).
+
+ On some models adds support for changing the display brightness and output,
+ switching the LCD backlight on and off, and most importantly, allows you to
+ blink those fancy LEDs intended for reporting mail and wireless status.
+
+This driver supersedes the old asus_acpi driver.
+
+Requirements
+------------
+
+  Kernel 2.6.X sources, configured for your computer, with ACPI support.
+  You also need CONFIG_INPUT and CONFIG_ACPI.
+
+Status
+------
+
+ The features currently supported are the following (see below for
+ detailed description):
+
+ - Fn key combinations
+ - Bluetooth enable and disable
+ - Wlan enable and disable
+ - GPS enable and disable
+ - Video output switching
+ - Ambient Light Sensor on and off
+ - LED control
+ - LED Display control
+ - LCD brightness control
+ - LCD on and off
+
+ A compatibility table by model and feature is maintained on the web
+ site, http://acpi4asus.sf.net/.
+
+Usage
+-----
+
+  Try "modprobe asus-laptop". Check your dmesg (simply type dmesg). You should
+  see some lines like this :
+
+      Asus Laptop Extras version 0.42
+        - L2D model detected.
+
+  If it is not the output you have on your laptop, send it (and the laptop's
+  DSDT) to me.
+
+  That's all, now, all the events generated by the hotkeys of your laptop
+  should be reported via netlink events. You can check with
+  "acpi_genl monitor" (part of the acpica project).
+
+  Hotkeys are also reported as input keys (like keyboards) you can check
+  which key are supported using "xev" under X11.
+
+  You can get information on the version of your DSDT table by reading the
+  /sys/devices/platform/asus-laptop/infos entry. If you have a question or a
+  bug report to do, please include the output of this entry.
+
+LEDs
+----
+
+  You can modify LEDs be echoing values to `/sys/class/leds/asus/*/brightness`::
+
+    echo 1 >  /sys/class/leds/asus::mail/brightness
+
+  will switch the mail LED on.
+
+  You can also know if they are on/off by reading their content and use
+  kernel triggers like disk-activity or heartbeat.
+
+Backlight
+---------
+
+  You can control lcd backlight power and brightness with
+  /sys/class/backlight/asus-laptop/. Brightness Values are between 0 and 15.
+
+Wireless devices
+----------------
+
+  You can turn the internal Bluetooth adapter on/off with the bluetooth entry
+  (only on models with Bluetooth). This usually controls the associated LED.
+  Same for Wlan adapter.
+
+Display switching
+-----------------
+
+  Note: the display switching code is currently considered EXPERIMENTAL.
+
+  Switching works for the following models:
+
+    - L3800C
+    - A2500H
+    - L5800C
+    - M5200N
+    - W1000N (albeit with some glitches)
+    - M6700R
+    - A6JC
+    - F3J
+
+  Switching doesn't work for the following:
+
+    - M3700N
+    - L2X00D (locks the laptop under certain conditions)
+
+  To switch the displays, echo values from 0 to 15 to
+  /sys/devices/platform/asus-laptop/display. The significance of those values
+  is as follows:
+
+  +-------+-----+-----+-----+-----+-----+
+  | Bin   | Val | DVI | TV  | CRT | LCD |
+  +-------+-----+-----+-----+-----+-----+
+  | 0000  |   0 |     |     |     |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 0001  |   1 |     |     |     |  X  |
+  +-------+-----+-----+-----+-----+-----+
+  | 0010  |   2 |     |     |  X  |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 0011  |   3 |     |     |  X  |  X  |
+  +-------+-----+-----+-----+-----+-----+
+  | 0100  |   4 |     |  X  |     |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 0101  |   5 |     |  X  |     | X   |
+  +-------+-----+-----+-----+-----+-----+
+  | 0110  |   6 |     |  X  |  X  |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 0111  |   7 |     |  X  |  X  |  X  |
+  +-------+-----+-----+-----+-----+-----+
+  | 1000  |   8 |  X  |     |     |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 1001  |   9 |  X  |     |     |  X  |
+  +-------+-----+-----+-----+-----+-----+
+  | 1010  |  10 |  X  |     |  X  |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 1011  |  11 |  X  |     |  X  |  X  |
+  +-------+-----+-----+-----+-----+-----+
+  | 1100  |  12 |  X  |  X  |     |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 1101  |  13 |  X  |  X  |     |  X  |
+  +-------+-----+-----+-----+-----+-----+
+  | 1110  |  14 |  X  |  X  |  X  |     |
+  +-------+-----+-----+-----+-----+-----+
+  | 1111  |  15 |  X  |  X  |  X  |  X  |
+  +-------+-----+-----+-----+-----+-----+
+
+  In most cases, the appropriate displays must be plugged in for the above
+  combinations to work. TV-Out may need to be initialized at boot time.
+
+  Debugging:
+
+  1) Check whether the Fn+F8 key:
+
+     a) does not lock the laptop (try a boot with noapic / nolapic if it does)
+     b) generates events (0x6n, where n is the value corresponding to the
+        configuration above)
+     c) actually works
+
+     Record the disp value at every configuration.
+  2) Echo values from 0 to 15 to /sys/devices/platform/asus-laptop/display.
+     Record its value, note any change. If nothing changes, try a broader range,
+     up to 65535.
+  3) Send ANY output (both positive and negative reports are needed, unless your
+     machine is already listed above) to the acpi4asus-user mailing list.
+
+  Note: on some machines (e.g. L3C), after the module has been loaded, only 0x6n
+  events are generated and no actual switching occurs. In such a case, a line
+  like::
+
+    echo $((10#$arg-60)) > /sys/devices/platform/asus-laptop/display
+
+  will usually do the trick ($arg is the 0000006n-like event passed to acpid).
+
+  Note: there is currently no reliable way to read display status on xxN
+  (Centrino) models.
+
+LED display
+-----------
+
+  Some models like the W1N have a LED display that can be used to display
+  several items of information.
+
+  LED display works for the following models:
+
+    - W1000N
+    - W1J
+
+  To control the LED display, use the following::
+
+    echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+
+  where T control the 3 letters display, and DDD the 3 digits display,
+  according to the tables below::
+
+         DDD (digits)
+         000 to 999 = display digits
+         AAA        = ---
+         BBB to FFF = turn-off
+
+         T  (type)
+         0 = off
+         1 = dvd
+         2 = vcd
+         3 = mp3
+         4 = cd
+         5 = tv
+         6 = cpu
+         7 = vol
+
+  For example "echo 0x01000001 >/sys/devices/platform/asus-laptop/ledd"
+  would display "DVD001".
+
+Driver options
+--------------
+
+ Options can be passed to the asus-laptop driver using the standard
+ module argument syntax (<param>=<value> when passing the option to the
+ module or asus-laptop.<param>=<value> on the kernel boot line when
+ asus-laptop is statically linked into the kernel).
+
+	     wapf: WAPF defines the behavior of the Fn+Fx wlan key
+		   The significance of values is yet to be found, but
+		   most of the time:
+
+		   - 0x0 should do nothing
+		   - 0x1 should allow to control the device with Fn+Fx key.
+		   - 0x4 should send an ACPI event (0x88) while pressing the Fn+Fx key
+		   - 0x5 like 0x1 or 0x4
+
+ The default value is 0x1.
+
+Unsupported models
+------------------
+
+ These models will never be supported by this module, as they use a completely
+ different mechanism to handle LEDs and extra stuff (meaning we have no clue
+ how it works):
+
+ - ASUS A1300 (A1B), A1370D
+ - ASUS L7300G
+ - ASUS L8400
+
+Patches, Errors, Questions
+--------------------------
+
+ I appreciate any success or failure
+ reports, especially if they add to or correct the compatibility table.
+ Please include the following information in your report:
+
+ - Asus model name
+ - a copy of your ACPI tables, using the "acpidump" utility
+ - a copy of /sys/devices/platform/asus-laptop/infos
+ - which driver features work and which don't
+ - the observed behavior of non-working features
+
+ Any other comments or patches are also more than welcome.
+
+ acpi4asus-user@lists.sourceforge.net
+
+ http://sourceforge.net/projects/acpi4asus