Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 158 insertions, 0 deletions

diff --git a/Documentation/admin-guide/laptops/sonypi.rst b/Documentation/admin-guide/laptops/sonypi.rst
new file mode 100644
index 000000000..190da1234
--- /dev/null
+++ b/Documentation/admin-guide/laptops/sonypi.rst
@@ -0,0 +1,158 @@
+==================================================
+Sony Programmable I/O Control Device Driver Readme
+==================================================
+
+	- Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
+	- Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+	- Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+	- Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+	- Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+	- Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
+
+This driver enables access to the Sony Programmable I/O Control Device which
+can be found in many Sony Vaio laptops. Some newer Sony laptops (seems to be
+limited to new FX series laptops, at least the FX501 and the FX702) lack a
+sonypi device and are not supported at all by this driver.
+
+It will give access (through a user space utility) to some events those laptops
+generate, like:
+
+	- jogdial events (the small wheel on the side of Vaios)
+	- capture button events (only on Vaio Picturebook series)
+	- Fn keys
+	- bluetooth button (only on C1VR model)
+	- programmable keys, back, help, zoom, thumbphrase buttons, etc.
+	  (when available)
+
+Those events (see linux/sonypi.h) can be polled using the character device node
+/dev/sonypi (major 10, minor auto allocated or specified as a option).
+A simple daemon which translates the jogdial movements into mouse wheel events
+can be downloaded at: <http://popies.net/sonypi/>
+
+Another option to intercept the events is to get them directly through the
+input layer.
+
+This driver supports also some ioctl commands for setting the LCD screen
+brightness and querying the batteries charge information (some more
+commands may be added in the future).
+
+This driver can also be used to set the camera controls on Picturebook series
+(brightness, contrast etc), and is used by the video4linux driver for the
+Motion Eye camera.
+
+Please note that this driver was created by reverse engineering the Windows
+driver and the ACPI BIOS, because Sony doesn't agree to release any programming
+specs for its laptops. If someone convinces them to do so, drop me a note.
+
+Driver options:
+---------------
+
+Several options can be passed to the sonypi driver using the standard
+module argument syntax (<param>=<value> when passing the option to the
+module or sonypi.<param>=<value> on the kernel boot line when sonypi is
+statically linked into the kernel). Those options are:
+
+	=============== =======================================================
+	minor:		minor number of the misc device /dev/sonypi,
+			default is -1 (automatic allocation, see /proc/misc
+			or kernel logs)
+
+	camera:		if you have a PictureBook series Vaio (with the
+			integrated MotionEye camera), set this parameter to 1
+			in order to let the driver access to the camera
+
+	fnkeyinit:	on some Vaios (C1VE, C1VR etc), the Fn key events don't
+			get enabled unless you set this parameter to 1.
+			Do not use this option unless it's actually necessary,
+			some Vaio models don't deal well with this option.
+			This option is available only if the kernel is
+			compiled without ACPI support (since it conflicts
+			with it and it shouldn't be required anyway if
+			ACPI is already enabled).
+
+	verbose:	set to 1 to print unknown events received from the
+			sonypi device.
+			set to 2 to print all events received from the
+			sonypi device.
+
+	compat:		uses some compatibility code for enabling the sonypi
+			events. If the driver worked for you in the past
+			(prior to version 1.5) and does not work anymore,
+			add this option and report to the author.
+
+	mask:		event mask telling the driver what events will be
+			reported to the user. This parameter is required for
+			some Vaio models where the hardware reuses values
+			used in other Vaio models (like the FX series who does
+			not have a jogdial but reuses the jogdial events for
+			programmable keys events). The default event mask is
+			set to 0xffffffff, meaning that all possible events
+			will be tried. You can use the following bits to
+			construct your own event mask (from
+			drivers/char/sonypi.h)::
+
+				SONYPI_JOGGER_MASK		0x0001
+				SONYPI_CAPTURE_MASK		0x0002
+				SONYPI_FNKEY_MASK		0x0004
+				SONYPI_BLUETOOTH_MASK		0x0008
+				SONYPI_PKEY_MASK		0x0010
+				SONYPI_BACK_MASK		0x0020
+				SONYPI_HELP_MASK		0x0040
+				SONYPI_LID_MASK			0x0080
+				SONYPI_ZOOM_MASK		0x0100
+				SONYPI_THUMBPHRASE_MASK		0x0200
+				SONYPI_MEYE_MASK		0x0400
+				SONYPI_MEMORYSTICK_MASK		0x0800
+				SONYPI_BATTERY_MASK		0x1000
+				SONYPI_WIRELESS_MASK		0x2000
+
+	useinput:	if set (which is the default) two input devices are
+			created, one which interprets the jogdial events as
+			mouse events, the other one which acts like a
+			keyboard reporting the pressing of the special keys.
+	=============== =======================================================
+
+Module use:
+-----------
+
+In order to automatically load the sonypi module on use, you can put those
+lines a configuration file in /etc/modprobe.d/::
+
+	alias char-major-10-250 sonypi
+	options sonypi minor=250
+
+This supposes the use of minor 250 for the sonypi device::
+
+	# mknod /dev/sonypi c 10 250
+
+Bugs:
+-----
+
+	- several users reported that this driver disables the BIOS-managed
+	  Fn-keys which put the laptop in sleeping state, or switch the
+	  external monitor on/off. There is no workaround yet, since this
+	  driver disables all APM management for those keys, by enabling the
+	  ACPI management (and the ACPI core stuff is not complete yet). If
+	  you have one of those laptops with working Fn keys and want to
+	  continue to use them, don't use this driver.
+
+	- some users reported that the laptop speed is lower (dhrystone
+	  tested) when using the driver with the fnkeyinit parameter. I cannot
+	  reproduce it on my laptop and not all users have this problem.
+	  This happens because the fnkeyinit parameter enables the ACPI
+	  mode (but without additional ACPI control, like processor
+	  speed handling etc). Use ACPI instead of APM if it works on your
+	  laptop.
+
+	- sonypi lacks the ability to distinguish between certain key
+	  events on some models.
+
+	- some models with the nvidia card (geforce go 6200 tc) uses a
+	  different way to adjust the backlighting of the screen. There
+	  is a userspace utility to adjust the brightness on those models,
+	  which can be downloaded from
+	  https://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
+
+	- since all development was done by reverse engineering, there is
+	  *absolutely no guarantee* that this driver will not crash your
+	  laptop. Permanently.