Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 223 insertions, 0 deletions

diff --git a/Documentation/admin-guide/mm/concepts.rst b/Documentation/admin-guide/mm/concepts.rst
new file mode 100644
index 000000000..c79f1e336
--- /dev/null
+++ b/Documentation/admin-guide/mm/concepts.rst
@@ -0,0 +1,223 @@
+.. _mm_concepts:
+
+=================
+Concepts overview
+=================
+
+The memory management in Linux is a complex system that evolved over the
+years and included more and more functionality to support a variety of
+systems from MMU-less microcontrollers to supercomputers. The memory
+management for systems without an MMU is called ``nommu`` and it
+definitely deserves a dedicated document, which hopefully will be
+eventually written. Yet, although some of the concepts are the same,
+here we assume that an MMU is available and a CPU can translate a virtual
+address to a physical address.
+
+.. contents:: :local:
+
+Virtual Memory Primer
+=====================
+
+The physical memory in a computer system is a limited resource and
+even for systems that support memory hotplug there is a hard limit on
+the amount of memory that can be installed. The physical memory is not
+necessarily contiguous; it might be accessible as a set of distinct
+address ranges. Besides, different CPU architectures, and even
+different implementations of the same architecture have different views
+of how these address ranges are defined.
+
+All this makes dealing directly with physical memory quite complex and
+to avoid this complexity a concept of virtual memory was developed.
+
+The virtual memory abstracts the details of physical memory from the
+application software, allows to keep only needed information in the
+physical memory (demand paging) and provides a mechanism for the
+protection and controlled sharing of data between processes.
+
+With virtual memory, each and every memory access uses a virtual
+address. When the CPU decodes an instruction that reads (or
+writes) from (or to) the system memory, it translates the `virtual`
+address encoded in that instruction to a `physical` address that the
+memory controller can understand.
+
+The physical system memory is divided into page frames, or pages. The
+size of each page is architecture specific. Some architectures allow
+selection of the page size from several supported values; this
+selection is performed at the kernel build time by setting an
+appropriate kernel configuration option.
+
+Each physical memory page can be mapped as one or more virtual
+pages. These mappings are described by page tables that allow
+translation from a virtual address used by programs to the physical
+memory address. The page tables are organized hierarchically.
+
+The tables at the lowest level of the hierarchy contain physical
+addresses of actual pages used by the software. The tables at higher
+levels contain physical addresses of the pages belonging to the lower
+levels. The pointer to the top level page table resides in a
+register. When the CPU performs the address translation, it uses this
+register to access the top level page table. The high bits of the
+virtual address are used to index an entry in the top level page
+table. That entry is then used to access the next level in the
+hierarchy with the next bits of the virtual address as the index to
+that level page table. The lowest bits in the virtual address define
+the offset inside the actual page.
+
+Huge Pages
+==========
+
+The address translation requires several memory accesses and memory
+accesses are slow relatively to CPU speed. To avoid spending precious
+processor cycles on the address translation, CPUs maintain a cache of
+such translations called Translation Lookaside Buffer (or
+TLB). Usually TLB is pretty scarce resource and applications with
+large memory working set will experience performance hit because of
+TLB misses.
+
+Many modern CPU architectures allow mapping of the memory pages
+directly by the higher levels in the page table. For instance, on x86,
+it is possible to map 2M and even 1G pages using entries in the second
+and the third level page tables. In Linux such pages are called
+`huge`. Usage of huge pages significantly reduces pressure on TLB,
+improves TLB hit-rate and thus improves overall system performance.
+
+There are two mechanisms in Linux that enable mapping of the physical
+memory with the huge pages. The first one is `HugeTLB filesystem`, or
+hugetlbfs. It is a pseudo filesystem that uses RAM as its backing
+store. For the files created in this filesystem the data resides in
+the memory and mapped using huge pages. The hugetlbfs is described at
+:ref:`Documentation/admin-guide/mm/hugetlbpage.rst <hugetlbpage>`.
+
+Another, more recent, mechanism that enables use of the huge pages is
+called `Transparent HugePages`, or THP. Unlike the hugetlbfs that
+requires users and/or system administrators to configure what parts of
+the system memory should and can be mapped by the huge pages, THP
+manages such mappings transparently to the user and hence the
+name. See
+:ref:`Documentation/admin-guide/mm/transhuge.rst <admin_guide_transhuge>`
+for more details about THP.
+
+Zones
+=====
+
+Often hardware poses restrictions on how different physical memory
+ranges can be accessed. In some cases, devices cannot perform DMA to
+all the addressable memory. In other cases, the size of the physical
+memory exceeds the maximal addressable size of virtual memory and
+special actions are required to access portions of the memory. Linux
+groups memory pages into `zones` according to their possible
+usage. For example, ZONE_DMA will contain memory that can be used by
+devices for DMA, ZONE_HIGHMEM will contain memory that is not
+permanently mapped into kernel's address space and ZONE_NORMAL will
+contain normally addressed pages.
+
+The actual layout of the memory zones is hardware dependent as not all
+architectures define all zones, and requirements for DMA are different
+for different platforms.
+
+Nodes
+=====
+
+Many multi-processor machines are NUMA - Non-Uniform Memory Access -
+systems. In such systems the memory is arranged into banks that have
+different access latency depending on the "distance" from the
+processor. Each bank is referred to as a `node` and for each node Linux
+constructs an independent memory management subsystem. A node has its
+own set of zones, lists of free and used pages and various statistics
+counters. You can find more details about NUMA in
+:ref:`Documentation/mm/numa.rst <numa>` and in
+:ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`.
+
+Page cache
+==========
+
+The physical memory is volatile and the common case for getting data
+into the memory is to read it from files. Whenever a file is read, the
+data is put into the `page cache` to avoid expensive disk access on
+the subsequent reads. Similarly, when one writes to a file, the data
+is placed in the page cache and eventually gets into the backing
+storage device. The written pages are marked as `dirty` and when Linux
+decides to reuse them for other purposes, it makes sure to synchronize
+the file contents on the device with the updated data.
+
+Anonymous Memory
+================
+
+The `anonymous memory` or `anonymous mappings` represent memory that
+is not backed by a filesystem. Such mappings are implicitly created
+for program's stack and heap or by explicit calls to mmap(2) system
+call. Usually, the anonymous mappings only define virtual memory areas
+that the program is allowed to access. The read accesses will result
+in creation of a page table entry that references a special physical
+page filled with zeroes. When the program performs a write, a regular
+physical page will be allocated to hold the written data. The page
+will be marked dirty and if the kernel decides to repurpose it,
+the dirty page will be swapped out.
+
+Reclaim
+=======
+
+Throughout the system lifetime, a physical page can be used for storing
+different types of data. It can be kernel internal data structures,
+DMA'able buffers for device drivers use, data read from a filesystem,
+memory allocated by user space processes etc.
+
+Depending on the page usage it is treated differently by the Linux
+memory management. The pages that can be freed at any time, either
+because they cache the data available elsewhere, for instance, on a
+hard disk, or because they can be swapped out, again, to the hard
+disk, are called `reclaimable`. The most notable categories of the
+reclaimable pages are page cache and anonymous memory.
+
+In most cases, the pages holding internal kernel data and used as DMA
+buffers cannot be repurposed, and they remain pinned until freed by
+their user. Such pages are called `unreclaimable`. However, in certain
+circumstances, even pages occupied with kernel data structures can be
+reclaimed. For instance, in-memory caches of filesystem metadata can
+be re-read from the storage device and therefore it is possible to
+discard them from the main memory when system is under memory
+pressure.
+
+The process of freeing the reclaimable physical memory pages and
+repurposing them is called (surprise!) `reclaim`. Linux can reclaim
+pages either asynchronously or synchronously, depending on the state
+of the system. When the system is not loaded, most of the memory is free
+and allocation requests will be satisfied immediately from the free
+pages supply. As the load increases, the amount of the free pages goes
+down and when it reaches a certain threshold (low watermark), an
+allocation request will awaken the ``kswapd`` daemon. It will
+asynchronously scan memory pages and either just free them if the data
+they contain is available elsewhere, or evict to the backing storage
+device (remember those dirty pages?). As memory usage increases even
+more and reaches another threshold - min watermark - an allocation
+will trigger `direct reclaim`. In this case allocation is stalled
+until enough memory pages are reclaimed to satisfy the request.
+
+Compaction
+==========
+
+As the system runs, tasks allocate and free the memory and it becomes
+fragmented. Although with virtual memory it is possible to present
+scattered physical pages as virtually contiguous range, sometimes it is
+necessary to allocate large physically contiguous memory areas. Such
+need may arise, for instance, when a device driver requires a large
+buffer for DMA, or when THP allocates a huge page. Memory `compaction`
+addresses the fragmentation issue. This mechanism moves occupied pages
+from the lower part of a memory zone to free pages in the upper part
+of the zone. When a compaction scan is finished free pages are grouped
+together at the beginning of the zone and allocations of large
+physically contiguous areas become possible.
+
+Like reclaim, the compaction may happen asynchronously in the ``kcompactd``
+daemon or synchronously as a result of a memory allocation request.
+
+OOM killer
+==========
+
+It is possible that on a loaded machine memory will be exhausted and the
+kernel will be unable to reclaim enough memory to continue to operate. In
+order to save the rest of the system, it invokes the `OOM killer`.
+
+The `OOM killer` selects a task to sacrifice for the sake of the overall
+system health. The selected task is killed in a hope that after it exits
+enough memory will be freed to continue normal operation.