Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 505 insertions, 0 deletions

diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
new file mode 100644
index 000000000..466c560b0
--- /dev/null
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -0,0 +1,505 @@
+================================
+Documentation for /proc/sys/net/
+================================
+
+Copyright
+
+Copyright (c) 1999
+
+	- Terrehon Bowden <terrehon@pacbell.net>
+	- Bodo Bauer <bb@ricochet.net>
+
+Copyright (c) 2000
+
+	- Jorge Nerin <comandante@zaralinux.com>
+
+Copyright (c) 2009
+
+	- Shen Feng <shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
+
+This file contains the documentation for the sysctl files in
+/proc/sys/net
+
+The interface  to  the  networking  parts  of  the  kernel  is  located  in
+/proc/sys/net. The following table shows all possible subdirectories.  You may
+see only some of them, depending on your kernel's configuration.
+
+
+Table : Subdirectories in /proc/sys/net
+
+ ========= =================== = ========== ===================
+ Directory Content               Directory  Content
+ ========= =================== = ========== ===================
+ 802       E802 protocol         mptcp      Multipath TCP
+ appletalk Appletalk protocol    netfilter  Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose       X.25 PLP layer
+ core      General parameter     tipc       TIPC
+ ethernet  Ethernet protocol     unix       Unix domain sockets
+ ipv4      IP version 4          x25        X.25 protocol
+ ipv6      IP version 6
+ ========= =================== = ========== ===================
+
+1. /proc/sys/net/core - Network core options
+============================================
+
+bpf_jit_enable
+--------------
+
+This enables the BPF Just in Time (JIT) compiler. BPF is a flexible
+and efficient infrastructure allowing to execute bytecode at various
+hook points. It is used in a number of Linux kernel subsystems such
+as networking (e.g. XDP, tc), tracing (e.g. kprobes, uprobes, tracepoints)
+and security (e.g. seccomp). LLVM has a BPF back end that can compile
+restricted C into a sequence of BPF instructions. After program load
+through bpf(2) and passing a verifier in the kernel, a JIT will then
+translate these BPF proglets into native CPU instructions. There are
+two flavors of JITs, the newer eBPF JIT currently supported on:
+
+  - x86_64
+  - x86_32
+  - arm64
+  - arm32
+  - ppc64
+  - ppc32
+  - sparc64
+  - mips64
+  - s390x
+  - riscv64
+  - riscv32
+
+And the older cBPF JIT supported on the following archs:
+
+  - mips
+  - sparc
+
+eBPF JITs are a superset of cBPF JITs, meaning the kernel will
+migrate cBPF instructions into eBPF instructions and then JIT
+compile them transparently. Older cBPF JITs can only translate
+tcpdump filters, seccomp rules, etc, but not mentioned eBPF
+programs loaded through bpf(2).
+
+Values:
+
+	- 0 - disable the JIT (default value)
+	- 1 - enable the JIT
+	- 2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
+bpf_jit_harden
+--------------
+
+This enables hardening for the BPF JIT compiler. Supported are eBPF
+JIT backends. Enabling hardening trades off performance, but can
+mitigate JIT spraying.
+
+Values:
+
+	- 0 - disable JIT hardening (default value)
+	- 1 - enable JIT hardening for unprivileged users only
+	- 2 - enable JIT hardening for all users
+
+where "privileged user" in this context means a process having
+CAP_BPF or CAP_SYS_ADMIN in the root user name space.
+
+bpf_jit_kallsyms
+----------------
+
+When BPF JIT compiler is enabled, then compiled images are unknown
+addresses to the kernel, meaning they neither show up in traces nor
+in /proc/kallsyms. This enables export of these addresses, which can
+be used for debugging/tracing. If bpf_jit_harden is enabled, this
+feature is disabled.
+
+Values :
+
+	- 0 - disable JIT kallsyms export (default value)
+	- 1 - enable JIT kallsyms export for privileged users only
+
+bpf_jit_limit
+-------------
+
+This enforces a global limit for memory allocations to the BPF JIT
+compiler in order to reject unprivileged JIT requests once it has
+been surpassed. bpf_jit_limit contains the value of the global limit
+in bytes.
+
+dev_weight
+----------
+
+The maximum number of packets that kernel can handle on a NAPI interrupt,
+it's a Per-CPU variable. For drivers that support LRO or GRO_HW, a hardware
+aggregated packet is counted as one packet in this context.
+
+Default: 64
+
+dev_weight_rx_bias
+------------------
+
+RPS (e.g. RFS, aRFS) processing is competing with the registered NAPI poll function
+of the driver for the per softirq cycle netdev_budget. This parameter influences
+the proportion of the configured netdev_budget that is spent on RPS based packet
+processing during RX softirq cycles. It is further meant for making current
+dev_weight adaptable for asymmetric CPU needs on RX/TX side of the network stack.
+(see dev_weight_tx_bias) It is effective on a per CPU basis. Determination is based
+on dev_weight and is calculated multiplicative (dev_weight * dev_weight_rx_bias).
+
+Default: 1
+
+dev_weight_tx_bias
+------------------
+
+Scales the maximum number of packets that can be processed during a TX softirq cycle.
+Effective on a per CPU basis. Allows scaling of current dev_weight for asymmetric
+net stack processing needs. Be careful to avoid making TX softirq processing a CPU hog.
+
+Calculation is based on dev_weight (dev_weight * dev_weight_tx_bias).
+
+Default: 1
+
+default_qdisc
+-------------
+
+The default queuing discipline to use for network devices. This allows
+overriding the default of pfifo_fast with an alternative. Since the default
+queuing discipline is created without additional parameters so is best suited
+to queuing disciplines that work well without configuration like stochastic
+fair queue (sfq), CoDel (codel) or fair queue CoDel (fq_codel). Don't use
+queuing disciplines like Hierarchical Token Bucket or Deficit Round Robin
+which require setting up classes and bandwidths. Note that physical multiqueue
+interfaces still use mq as root qdisc, which in turn uses this default for its
+leaves. Virtual devices (like e.g. lo or veth) ignore this setting and instead
+default to noqueue.
+
+Default: pfifo_fast
+
+busy_read
+---------
+
+Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL)
+Approximate time in us to busy loop waiting for packets on the device queue.
+This sets the default value of the SO_BUSY_POLL socket option.
+Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
+which is the preferred method of enabling. If you need to enable the feature
+globally via sysctl, a value of 50 is recommended.
+
+Will increase power usage.
+
+Default: 0 (off)
+
+busy_poll
+----------------
+Low latency busy poll timeout for poll and select. (needs CONFIG_NET_RX_BUSY_POLL)
+Approximate time in us to busy loop waiting for events.
+Recommended value depends on the number of sockets you poll on.
+For several sockets 50, for several hundreds 100.
+For more than that you probably want to use epoll.
+Note that only sockets with SO_BUSY_POLL set will be busy polled,
+so you want to either selectively set SO_BUSY_POLL on those sockets or set
+sysctl.net.busy_read globally.
+
+Will increase power usage.
+
+Default: 0 (off)
+
+rmem_default
+------------
+
+The default setting of the socket receive buffer in bytes.
+
+rmem_max
+--------
+
+The maximum receive socket buffer size in bytes.
+
+rps_default_mask
+----------------
+
+The default RPS CPU mask used on newly created network devices. An empty
+mask means RPS disabled by default.
+
+tstamp_allow_data
+-----------------
+Allow processes to receive tx timestamps looped together with the original
+packet contents. If disabled, transmit timestamp requests from unprivileged
+processes are dropped unless socket option SOF_TIMESTAMPING_OPT_TSONLY is set.
+
+Default: 1 (on)
+
+
+wmem_default
+------------
+
+The default setting (in bytes) of the socket send buffer.
+
+wmem_max
+--------
+
+The maximum send socket buffer size in bytes.
+
+message_burst and message_cost
+------------------------------
+
+These parameters  are used to limit the warning messages written to the kernel
+log from  the  networking  code.  They  enforce  a  rate  limit  to  make  a
+denial-of-service attack  impossible. A higher message_cost factor, results in
+fewer messages that will be written. Message_burst controls when messages will
+be dropped.  The  default  settings  limit  warning messages to one every five
+seconds.
+
+warnings
+--------
+
+This sysctl is now unused.
+
+This was used to control console messages from the networking stack that
+occur because of problems on the network like duplicate address or bad
+checksums.
+
+These messages are now emitted at KERN_DEBUG and can generally be enabled
+and controlled by the dynamic_debug facility.
+
+netdev_budget
+-------------
+
+Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+poll). In one polling cycle interfaces which are registered to polling are
+probed in a round-robin manner. Also, a polling cycle may not exceed
+netdev_budget_usecs microseconds, even if netdev_budget has not been
+exhausted.
+
+netdev_budget_usecs
+---------------------
+
+Maximum number of microseconds in one NAPI polling cycle. Polling
+will exit when either netdev_budget_usecs have elapsed during the
+poll cycle or the number of packets processed reaches netdev_budget.
+
+netdev_max_backlog
+------------------
+
+Maximum number of packets, queued on the INPUT side, when the interface
+receives packets faster than kernel can process them.
+
+netdev_rss_key
+--------------
+
+RSS (Receive Side Scaling) enabled drivers use a 40 bytes host key that is
+randomly generated.
+Some user space might need to gather its content even if drivers do not
+provide ethtool -x support yet.
+
+::
+
+  myhost:~# cat /proc/sys/net/core/netdev_rss_key
+  84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8: ... (52 bytes total)
+
+File contains nul bytes if no driver ever called netdev_rss_key_fill() function.
+
+Note:
+  /proc/sys/net/core/netdev_rss_key contains 52 bytes of key,
+  but most drivers only use 40 bytes of it.
+
+::
+
+  myhost:~# ethtool -x eth0
+  RX flow hash indirection table for eth0 with 8 RX ring(s):
+      0:    0     1     2     3     4     5     6     7
+  RSS hash key:
+  84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
+
+netdev_tstamp_prequeue
+----------------------
+
+If set to 0, RX packet timestamps can be sampled after RPS processing, when
+the target CPU processes packets. It might give some delay on timestamps, but
+permit to distribute the load on several cpus.
+
+If set to 1 (default), timestamps are sampled as soon as possible, before
+queueing.
+
+netdev_unregister_timeout_secs
+------------------------------
+
+Unregister network device timeout in seconds.
+This option controls the timeout (in seconds) used to issue a warning while
+waiting for a network device refcount to drop to 0 during device
+unregistration. A lower value may be useful during bisection to detect
+a leaked reference faster. A larger value may be useful to prevent false
+warnings on slow/loaded systems.
+Default value is 10, minimum 1, maximum 3600.
+
+skb_defer_max
+-------------
+
+Max size (in skbs) of the per-cpu list of skbs being freed
+by the cpu which allocated them. Used by TCP stack so far.
+
+Default: 64
+
+optmem_max
+----------
+
+Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence
+of struct cmsghdr structures with appended data.
+
+fb_tunnels_only_for_init_net
+----------------------------
+
+Controls if fallback tunnels (like tunl0, gre0, gretap0, erspan0,
+sit0, ip6tnl0, ip6gre0) are automatically created. There are 3 possibilities
+(a) value = 0; respective fallback tunnels are created when module is
+loaded in every net namespaces (backward compatible behavior).
+(b) value = 1; [kcmd value: initns] respective fallback tunnels are
+created only in init net namespace and every other net namespace will
+not have them.
+(c) value = 2; [kcmd value: none] fallback tunnels are not created
+when a module is loaded in any of the net namespace. Setting value to
+"2" is pointless after boot if these modules are built-in, so there is
+a kernel command-line option that can change this default. Please refer to
+Documentation/admin-guide/kernel-parameters.txt for additional details.
+
+Not creating fallback tunnels gives control to userspace to create
+whatever is needed only and avoid creating devices which are redundant.
+
+Default : 0  (for compatibility reasons)
+
+devconf_inherit_init_net
+------------------------
+
+Controls if a new network namespace should inherit all current
+settings under /proc/sys/net/{ipv4,ipv6}/conf/{all,default}/. By
+default, we keep the current behavior: for IPv4 we inherit all current
+settings from init_net and for IPv6 we reset all settings to default.
+
+If set to 1, both IPv4 and IPv6 settings are forced to inherit from
+current ones in init_net. If set to 2, both IPv4 and IPv6 settings are
+forced to reset to their default values. If set to 3, both IPv4 and IPv6
+settings are forced to inherit from current ones in the netns where this
+new netns has been created.
+
+Default : 0  (for compatibility reasons)
+
+txrehash
+--------
+
+Controls default hash rethink behaviour on listening socket when SO_TXREHASH
+option is set to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt).
+
+If set to 1 (default), hash rethink is performed on listening socket.
+If set to 0, hash rethink is not performed.
+
+gro_normal_batch
+----------------
+
+Maximum number of the segments to batch up on output of GRO. When a packet
+exits GRO, either as a coalesced superframe or as an original packet which
+GRO has decided not to coalesce, it is placed on a per-NAPI list. This
+list is then passed to the stack when the number of segments reaches the
+gro_normal_batch limit.
+
+high_order_alloc_disable
+------------------------
+
+By default the allocator for page frags tries to use high order pages (order-3
+on x86). While the default behavior gives good results in most cases, some users
+might have hit a contention in page allocations/freeing. This was especially
+true on older kernels (< 5.14) when high-order pages were not stored on per-cpu
+lists. This allows to opt-in for order-0 allocation instead but is now mostly of
+historical importance.
+
+Default: 0
+
+2. /proc/sys/net/unix - Parameters for Unix domain sockets
+----------------------------------------------------------
+
+There is only one file in this directory.
+unix_dgram_qlen limits the max number of datagrams queued in Unix domain
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
+
+
+3. /proc/sys/net/ipv4 - IPV4 settings
+-------------------------------------
+Please see: Documentation/networking/ip-sysctl.rst and
+Documentation/admin-guide/sysctl/net.rst for descriptions of these entries.
+
+
+4. Appletalk
+------------
+
+The /proc/sys/net/appletalk  directory  holds the Appletalk configuration data
+when Appletalk is loaded. The configurable parameters are:
+
+aarp-expiry-time
+----------------
+
+The amount  of  time  we keep an ARP entry before expiring it. Used to age out
+old hosts.
+
+aarp-resolve-time
+-----------------
+
+The amount of time we will spend trying to resolve an Appletalk address.
+
+aarp-retransmit-limit
+---------------------
+
+The number of times we will retransmit a query before giving up.
+
+aarp-tick-time
+--------------
+
+Controls the rate at which expires are checked.
+
+The directory  /proc/net/appletalk  holds the list of active Appletalk sockets
+on a machine.
+
+The fields  indicate  the DDP type, the local address (in network:node format)
+the remote  address,  the  size of the transmit pending queue, the size of the
+received queue  (bytes waiting for applications to read) the state and the uid
+owning the socket.
+
+/proc/net/atalk_iface lists  all  the  interfaces  configured for appletalk.It
+shows the  name  of the interface, its Appletalk address, the network range on
+that address  (or  network number for phase 1 networks), and the status of the
+interface.
+
+/proc/net/atalk_route lists  each  known  network  route.  It lists the target
+(network) that the route leads to, the router (may be directly connected), the
+route flags, and the device the route is using.
+
+5. TIPC
+-------
+
+tipc_rmem
+---------
+
+The TIPC protocol now has a tunable for the receive memory, similar to the
+tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max)
+
+::
+
+    # cat /proc/sys/net/tipc/tipc_rmem
+    4252725 34021800        68043600
+    #
+
+The max value is set to CONN_OVERLOAD_LIMIT, and the default and min values
+are scaled (shifted) versions of that same value.  Note that the min value
+is not at this point in time used in any meaningful way, but the triplet is
+preserved in order to be consistent with things like tcp_rmem.
+
+named_timeout
+-------------
+
+TIPC name table updates are distributed asynchronously in a cluster, without
+any form of transaction handling. This means that different race scenarios are
+possible. One such is that a name withdrawal sent out by one node and received
+by another node may arrive after a second, overlapping name publication already
+has been accepted from a third node, although the conflicting updates
+originally may have been issued in the correct sequential order.
+If named_timeout is nonzero, failed topology updates will be placed on a defer
+queue until another event arrives that clears the error, or until the timeout
+expires. Value is in milliseconds.