Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 399 insertions, 0 deletions

diff --git a/Documentation/core-api/cachetlb.rst b/Documentation/core-api/cachetlb.rst
new file mode 100644
index 000000000..5c0552e78
--- /dev/null
+++ b/Documentation/core-api/cachetlb.rst
@@ -0,0 +1,399 @@
+==================================
+Cache and TLB Flushing Under Linux
+==================================
+
+:Author: David S. Miller <davem@redhat.com>
+
+This document describes the cache/tlb flushing interfaces called
+by the Linux VM subsystem.  It enumerates over each interface,
+describes its intended purpose, and what side effect is expected
+after the interface is invoked.
+
+The side effects described below are stated for a uniprocessor
+implementation, and what is to happen on that single processor.  The
+SMP cases are a simple extension, in that you just extend the
+definition such that the side effect for a particular interface occurs
+on all processors in the system.  Don't let this scare you into
+thinking SMP cache/tlb flushing must be so inefficient, this is in
+fact an area where many optimizations are possible.  For example,
+if it can be proven that a user address space has never executed
+on a cpu (see mm_cpumask()), one need not perform a flush
+for this address space on that cpu.
+
+First, the TLB flushing interfaces, since they are the simplest.  The
+"TLB" is abstracted under Linux as something the cpu uses to cache
+virtual-->physical address translations obtained from the software
+page tables.  Meaning that if the software page tables change, it is
+possible for stale translations to exist in this "TLB" cache.
+Therefore when software page table changes occur, the kernel will
+invoke one of the following flush methods _after_ the page table
+changes occur:
+
+1) ``void flush_tlb_all(void)``
+
+	The most severe flush of all.  After this interface runs,
+	any previous page table modification whatsoever will be
+	visible to the cpu.
+
+	This is usually invoked when the kernel page tables are
+	changed, since such translations are "global" in nature.
+
+2) ``void flush_tlb_mm(struct mm_struct *mm)``
+
+	This interface flushes an entire user address space from
+	the TLB.  After running, this interface must make sure that
+	any previous page table modifications for the address space
+	'mm' will be visible to the cpu.  That is, after running,
+	there will be no entries in the TLB for 'mm'.
+
+	This interface is used to handle whole address space
+	page table operations such as what happens during
+	fork, and exec.
+
+3) ``void flush_tlb_range(struct vm_area_struct *vma,
+   unsigned long start, unsigned long end)``
+
+	Here we are flushing a specific range of (user) virtual
+	address translations from the TLB.  After running, this
+	interface must make sure that any previous page table
+	modifications for the address space 'vma->vm_mm' in the range
+	'start' to 'end-1' will be visible to the cpu.  That is, after
+	running, there will be no entries in the TLB for 'mm' for
+	virtual addresses in the range 'start' to 'end-1'.
+
+	The "vma" is the backing store being used for the region.
+	Primarily, this is used for munmap() type operations.
+
+	The interface is provided in hopes that the port can find
+	a suitably efficient method for removing multiple page
+	sized translations from the TLB, instead of having the kernel
+	call flush_tlb_page (see below) for each entry which may be
+	modified.
+
+4) ``void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)``
+
+	This time we need to remove the PAGE_SIZE sized translation
+	from the TLB.  The 'vma' is the backing structure used by
+	Linux to keep track of mmap'd regions for a process, the
+	address space is available via vma->vm_mm.  Also, one may
+	test (vma->vm_flags & VM_EXEC) to see if this region is
+	executable (and thus could be in the 'instruction TLB' in
+	split-tlb type setups).
+
+	After running, this interface must make sure that any previous
+	page table modification for address space 'vma->vm_mm' for
+	user virtual address 'addr' will be visible to the cpu.  That
+	is, after running, there will be no entries in the TLB for
+	'vma->vm_mm' for virtual address 'addr'.
+
+	This is used primarily during fault processing.
+
+5) ``void update_mmu_cache(struct vm_area_struct *vma,
+   unsigned long address, pte_t *ptep)``
+
+	At the end of every page fault, this routine is invoked to
+	tell the architecture specific code that a translation
+	now exists at virtual address "address" for address space
+	"vma->vm_mm", in the software page tables.
+
+	A port may use this information in any way it so chooses.
+	For example, it could use this event to pre-load TLB
+	translations for software managed TLB configurations.
+	The sparc64 port currently does this.
+
+Next, we have the cache flushing interfaces.  In general, when Linux
+is changing an existing virtual-->physical mapping to a new value,
+the sequence will be in one of the following forms::
+
+	1) flush_cache_mm(mm);
+	   change_all_page_tables_of(mm);
+	   flush_tlb_mm(mm);
+
+	2) flush_cache_range(vma, start, end);
+	   change_range_of_page_tables(mm, start, end);
+	   flush_tlb_range(vma, start, end);
+
+	3) flush_cache_page(vma, addr, pfn);
+	   set_pte(pte_pointer, new_pte_val);
+	   flush_tlb_page(vma, addr);
+
+The cache level flush will always be first, because this allows
+us to properly handle systems whose caches are strict and require
+a virtual-->physical translation to exist for a virtual address
+when that virtual address is flushed from the cache.  The HyperSparc
+cpu is one such cpu with this attribute.
+
+The cache flushing routines below need only deal with cache flushing
+to the extent that it is necessary for a particular cpu.  Mostly,
+these routines must be implemented for cpus which have virtually
+indexed caches which must be flushed when virtual-->physical
+translations are changed or removed.  So, for example, the physically
+indexed physically tagged caches of IA32 processors have no need to
+implement these interfaces since the caches are fully synchronized
+and have no dependency on translation information.
+
+Here are the routines, one by one:
+
+1) ``void flush_cache_mm(struct mm_struct *mm)``
+
+	This interface flushes an entire user address space from
+	the caches.  That is, after running, there will be no cache
+	lines associated with 'mm'.
+
+	This interface is used to handle whole address space
+	page table operations such as what happens during exit and exec.
+
+2) ``void flush_cache_dup_mm(struct mm_struct *mm)``
+
+	This interface flushes an entire user address space from
+	the caches.  That is, after running, there will be no cache
+	lines associated with 'mm'.
+
+	This interface is used to handle whole address space
+	page table operations such as what happens during fork.
+
+	This option is separate from flush_cache_mm to allow some
+	optimizations for VIPT caches.
+
+3) ``void flush_cache_range(struct vm_area_struct *vma,
+   unsigned long start, unsigned long end)``
+
+	Here we are flushing a specific range of (user) virtual
+	addresses from the cache.  After running, there will be no
+	entries in the cache for 'vma->vm_mm' for virtual addresses in
+	the range 'start' to 'end-1'.
+
+	The "vma" is the backing store being used for the region.
+	Primarily, this is used for munmap() type operations.
+
+	The interface is provided in hopes that the port can find
+	a suitably efficient method for removing multiple page
+	sized regions from the cache, instead of having the kernel
+	call flush_cache_page (see below) for each entry which may be
+	modified.
+
+4) ``void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)``
+
+	This time we need to remove a PAGE_SIZE sized range
+	from the cache.  The 'vma' is the backing structure used by
+	Linux to keep track of mmap'd regions for a process, the
+	address space is available via vma->vm_mm.  Also, one may
+	test (vma->vm_flags & VM_EXEC) to see if this region is
+	executable (and thus could be in the 'instruction cache' in
+	"Harvard" type cache layouts).
+
+	The 'pfn' indicates the physical page frame (shift this value
+	left by PAGE_SHIFT to get the physical address) that 'addr'
+	translates to.  It is this mapping which should be removed from
+	the cache.
+
+	After running, there will be no entries in the cache for
+	'vma->vm_mm' for virtual address 'addr' which translates
+	to 'pfn'.
+
+	This is used primarily during fault processing.
+
+5) ``void flush_cache_kmaps(void)``
+
+	This routine need only be implemented if the platform utilizes
+	highmem.  It will be called right before all of the kmaps
+	are invalidated.
+
+	After running, there will be no entries in the cache for
+	the kernel virtual address range PKMAP_ADDR(0) to
+	PKMAP_ADDR(LAST_PKMAP).
+
+	This routing should be implemented in asm/highmem.h
+
+6) ``void flush_cache_vmap(unsigned long start, unsigned long end)``
+   ``void flush_cache_vunmap(unsigned long start, unsigned long end)``
+
+	Here in these two interfaces we are flushing a specific range
+	of (kernel) virtual addresses from the cache.  After running,
+	there will be no entries in the cache for the kernel address
+	space for virtual addresses in the range 'start' to 'end-1'.
+
+	The first of these two routines is invoked after vmap_range()
+	has installed the page table entries.  The second is invoked
+	before vunmap_range() deletes the page table entries.
+
+There exists another whole class of cpu cache issues which currently
+require a whole different set of interfaces to handle properly.
+The biggest problem is that of virtual aliasing in the data cache
+of a processor.
+
+Is your port susceptible to virtual aliasing in its D-cache?
+Well, if your D-cache is virtually indexed, is larger in size than
+PAGE_SIZE, and does not prevent multiple cache lines for the same
+physical address from existing at once, you have this problem.
+
+If your D-cache has this problem, first define asm/shmparam.h SHMLBA
+properly, it should essentially be the size of your virtually
+addressed D-cache (or if the size is variable, the largest possible
+size).  This setting will force the SYSv IPC layer to only allow user
+processes to mmap shared memory at address which are a multiple of
+this value.
+
+.. note::
+
+  This does not fix shared mmaps, check out the sparc64 port for
+  one way to solve this (in particular SPARC_FLAG_MMAPSHARED).
+
+Next, you have to solve the D-cache aliasing issue for all
+other cases.  Please keep in mind that fact that, for a given page
+mapped into some user address space, there is always at least one more
+mapping, that of the kernel in its linear mapping starting at
+PAGE_OFFSET.  So immediately, once the first user maps a given
+physical page into its address space, by implication the D-cache
+aliasing problem has the potential to exist since the kernel already
+maps this page at its virtual address.
+
+  ``void copy_user_page(void *to, void *from, unsigned long addr, struct page *page)``
+  ``void clear_user_page(void *to, unsigned long addr, struct page *page)``
+
+	These two routines store data in user anonymous or COW
+	pages.  It allows a port to efficiently avoid D-cache alias
+	issues between userspace and the kernel.
+
+	For example, a port may temporarily map 'from' and 'to' to
+	kernel virtual addresses during the copy.  The virtual address
+	for these two pages is chosen in such a way that the kernel
+	load/store instructions happen to virtual addresses which are
+	of the same "color" as the user mapping of the page.  Sparc64
+	for example, uses this technique.
+
+	The 'addr' parameter tells the virtual address where the
+	user will ultimately have this page mapped, and the 'page'
+	parameter gives a pointer to the struct page of the target.
+
+	If D-cache aliasing is not an issue, these two routines may
+	simply call memcpy/memset directly and do nothing more.
+
+  ``void flush_dcache_page(struct page *page)``
+
+        This routines must be called when:
+
+	  a) the kernel did write to a page that is in the page cache page
+	     and / or in high memory
+	  b) the kernel is about to read from a page cache page and user space
+	     shared/writable mappings of this page potentially exist.  Note
+	     that {get,pin}_user_pages{_fast} already call flush_dcache_page
+	     on any page found in the user address space and thus driver
+	     code rarely needs to take this into account.
+
+	.. note::
+
+	      This routine need only be called for page cache pages
+	      which can potentially ever be mapped into the address
+	      space of a user process.  So for example, VFS layer code
+	      handling vfs symlinks in the page cache need not call
+	      this interface at all.
+
+	The phrase "kernel writes to a page cache page" means, specifically,
+	that the kernel executes store instructions that dirty data in that
+	page at the page->virtual mapping of that page.  It is important to
+	flush here to handle D-cache aliasing, to make sure these kernel stores
+	are visible to user space mappings of that page.
+
+	The corollary case is just as important, if there are users which have
+	shared+writable mappings of this file, we must make sure that kernel
+	reads of these pages will see the most recent stores done by the user.
+
+	If D-cache aliasing is not an issue, this routine may simply be defined
+	as a nop on that architecture.
+
+        There is a bit set aside in page->flags (PG_arch_1) as "architecture
+	private".  The kernel guarantees that, for pagecache pages, it will
+	clear this bit when such a page first enters the pagecache.
+
+	This allows these interfaces to be implemented much more efficiently.
+	It allows one to "defer" (perhaps indefinitely) the actual flush if
+	there are currently no user processes mapping this page.  See sparc64's
+	flush_dcache_page and update_mmu_cache implementations for an example
+	of how to go about doing this.
+
+	The idea is, first at flush_dcache_page() time, if page_file_mapping()
+	returns a mapping, and mapping_mapped on that mapping returns %false,
+	just mark the architecture private page flag bit.  Later, in
+	update_mmu_cache(), a check is made of this flag bit, and if set the
+	flush is done and the flag bit is cleared.
+
+	.. important::
+
+			It is often important, if you defer the flush,
+			that the actual flush occurs on the same CPU
+			as did the cpu stores into the page to make it
+			dirty.  Again, see sparc64 for examples of how
+			to deal with this.
+
+  ``void flush_dcache_folio(struct folio *folio)``
+	This function is called under the same circumstances as
+	flush_dcache_page().  It allows the architecture to
+	optimise for flushing the entire folio of pages instead
+	of flushing one page at a time.
+
+  ``void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+  unsigned long user_vaddr, void *dst, void *src, int len)``
+  ``void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+  unsigned long user_vaddr, void *dst, void *src, int len)``
+
+	When the kernel needs to copy arbitrary data in and out
+	of arbitrary user pages (f.e. for ptrace()) it will use
+	these two routines.
+
+	Any necessary cache flushing or other coherency operations
+	that need to occur should happen here.  If the processor's
+	instruction cache does not snoop cpu stores, it is very
+	likely that you will need to flush the instruction cache
+	for copy_to_user_page().
+
+  ``void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+  unsigned long vmaddr)``
+
+  	When the kernel needs to access the contents of an anonymous
+	page, it calls this function (currently only
+	get_user_pages()).  Note: flush_dcache_page() deliberately
+	doesn't work for an anonymous page.  The default
+	implementation is a nop (and should remain so for all coherent
+	architectures).  For incoherent architectures, it should flush
+	the cache of the page at vmaddr.
+
+  ``void flush_icache_range(unsigned long start, unsigned long end)``
+
+  	When the kernel stores into addresses that it will execute
+	out of (eg when loading modules), this function is called.
+
+	If the icache does not snoop stores then this routine will need
+	to flush it.
+
+  ``void flush_icache_page(struct vm_area_struct *vma, struct page *page)``
+
+	All the functionality of flush_icache_page can be implemented in
+	flush_dcache_page and update_mmu_cache. In the future, the hope
+	is to remove this interface completely.
+
+The final category of APIs is for I/O to deliberately aliased address
+ranges inside the kernel.  Such aliases are set up by use of the
+vmap/vmalloc API.  Since kernel I/O goes via physical pages, the I/O
+subsystem assumes that the user mapping and kernel offset mapping are
+the only aliases.  This isn't true for vmap aliases, so anything in
+the kernel trying to do I/O to vmap areas must manually manage
+coherency.  It must do this by flushing the vmap range before doing
+I/O and invalidating it after the I/O returns.
+
+  ``void flush_kernel_vmap_range(void *vaddr, int size)``
+
+       flushes the kernel cache for a given virtual address range in
+       the vmap area.  This is to make sure that any data the kernel
+       modified in the vmap range is made visible to the physical
+       page.  The design is to make this area safe to perform I/O on.
+       Note that this API does *not* also flush the offset map alias
+       of the area.
+
+  ``void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates``
+
+       the cache for a given virtual address range in the vmap area
+       which prevents the processor from making the cache stale by
+       speculatively reading data while the I/O was occurring to the
+       physical pages.  This is only necessary for data reads into the
+       vmap area.