Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 414 insertions, 0 deletions

diff --git a/Documentation/crypto/architecture.rst b/Documentation/crypto/architecture.rst
new file mode 100644
index 000000000..646c3380a
--- /dev/null
+++ b/Documentation/crypto/architecture.rst
@@ -0,0 +1,414 @@
+Kernel Crypto API Architecture
+==============================
+
+Cipher algorithm types
+----------------------
+
+The kernel crypto API provides different API calls for the following
+cipher types:
+
+-  Symmetric ciphers
+
+-  AEAD ciphers
+
+-  Message digest, including keyed message digest
+
+-  Random number generation
+
+-  User space interface
+
+Ciphers And Templates
+---------------------
+
+The kernel crypto API provides implementations of single block ciphers
+and message digests. In addition, the kernel crypto API provides
+numerous "templates" that can be used in conjunction with the single
+block ciphers and message digests. Templates include all types of block
+chaining mode, the HMAC mechanism, etc.
+
+Single block ciphers and message digests can either be directly used by
+a caller or invoked together with a template to form multi-block ciphers
+or keyed message digests.
+
+A single block cipher may even be called with multiple templates.
+However, templates cannot be used without a single cipher.
+
+See /proc/crypto and search for "name". For example:
+
+-  aes
+
+-  ecb(aes)
+
+-  cmac(aes)
+
+-  ccm(aes)
+
+-  rfc4106(gcm(aes))
+
+-  sha1
+
+-  hmac(sha1)
+
+-  authenc(hmac(sha1),cbc(aes))
+
+In these examples, "aes" and "sha1" are the ciphers and all others are
+the templates.
+
+Synchronous And Asynchronous Operation
+--------------------------------------
+
+The kernel crypto API provides synchronous and asynchronous API
+operations.
+
+When using the synchronous API operation, the caller invokes a cipher
+operation which is performed synchronously by the kernel crypto API.
+That means, the caller waits until the cipher operation completes.
+Therefore, the kernel crypto API calls work like regular function calls.
+For synchronous operation, the set of API calls is small and
+conceptually similar to any other crypto library.
+
+Asynchronous operation is provided by the kernel crypto API which
+implies that the invocation of a cipher operation will complete almost
+instantly. That invocation triggers the cipher operation but it does not
+signal its completion. Before invoking a cipher operation, the caller
+must provide a callback function the kernel crypto API can invoke to
+signal the completion of the cipher operation. Furthermore, the caller
+must ensure it can handle such asynchronous events by applying
+appropriate locking around its data. The kernel crypto API does not
+perform any special serialization operation to protect the caller's data
+integrity.
+
+Crypto API Cipher References And Priority
+-----------------------------------------
+
+A cipher is referenced by the caller with a string. That string has the
+following semantics:
+
+::
+
+        template(single block cipher)
+
+
+where "template" and "single block cipher" is the aforementioned
+template and single block cipher, respectively. If applicable,
+additional templates may enclose other templates, such as
+
+::
+
+        template1(template2(single block cipher)))
+
+
+The kernel crypto API may provide multiple implementations of a template
+or a single block cipher. For example, AES on newer Intel hardware has
+the following implementations: AES-NI, assembler implementation, or
+straight C. Now, when using the string "aes" with the kernel crypto API,
+which cipher implementation is used? The answer to that question is the
+priority number assigned to each cipher implementation by the kernel
+crypto API. When a caller uses the string to refer to a cipher during
+initialization of a cipher handle, the kernel crypto API looks up all
+implementations providing an implementation with that name and selects
+the implementation with the highest priority.
+
+Now, a caller may have the need to refer to a specific cipher
+implementation and thus does not want to rely on the priority-based
+selection. To accommodate this scenario, the kernel crypto API allows
+the cipher implementation to register a unique name in addition to
+common names. When using that unique name, a caller is therefore always
+sure to refer to the intended cipher implementation.
+
+The list of available ciphers is given in /proc/crypto. However, that
+list does not specify all possible permutations of templates and
+ciphers. Each block listed in /proc/crypto may contain the following
+information -- if one of the components listed as follows are not
+applicable to a cipher, it is not displayed:
+
+-  name: the generic name of the cipher that is subject to the
+   priority-based selection -- this name can be used by the cipher
+   allocation API calls (all names listed above are examples for such
+   generic names)
+
+-  driver: the unique name of the cipher -- this name can be used by the
+   cipher allocation API calls
+
+-  module: the kernel module providing the cipher implementation (or
+   "kernel" for statically linked ciphers)
+
+-  priority: the priority value of the cipher implementation
+
+-  refcnt: the reference count of the respective cipher (i.e. the number
+   of current consumers of this cipher)
+
+-  selftest: specification whether the self test for the cipher passed
+
+-  type:
+
+   -  skcipher for symmetric key ciphers
+
+   -  cipher for single block ciphers that may be used with an
+      additional template
+
+   -  shash for synchronous message digest
+
+   -  ahash for asynchronous message digest
+
+   -  aead for AEAD cipher type
+
+   -  compression for compression type transformations
+
+   -  rng for random number generator
+
+   -  kpp for a Key-agreement Protocol Primitive (KPP) cipher such as
+      an ECDH or DH implementation
+
+-  blocksize: blocksize of cipher in bytes
+
+-  keysize: key size in bytes
+
+-  ivsize: IV size in bytes
+
+-  seedsize: required size of seed data for random number generator
+
+-  digestsize: output size of the message digest
+
+-  geniv: IV generator (obsolete)
+
+Key Sizes
+---------
+
+When allocating a cipher handle, the caller only specifies the cipher
+type. Symmetric ciphers, however, typically support multiple key sizes
+(e.g. AES-128 vs. AES-192 vs. AES-256). These key sizes are determined
+with the length of the provided key. Thus, the kernel crypto API does
+not provide a separate way to select the particular symmetric cipher key
+size.
+
+Cipher Allocation Type And Masks
+--------------------------------
+
+The different cipher handle allocation functions allow the specification
+of a type and mask flag. Both parameters have the following meaning (and
+are therefore not covered in the subsequent sections).
+
+The type flag specifies the type of the cipher algorithm. The caller
+usually provides a 0 when the caller wants the default handling.
+Otherwise, the caller may provide the following selections which match
+the aforementioned cipher types:
+
+-  CRYPTO_ALG_TYPE_CIPHER Single block cipher
+
+-  CRYPTO_ALG_TYPE_COMPRESS Compression
+
+-  CRYPTO_ALG_TYPE_AEAD Authenticated Encryption with Associated Data
+   (MAC)
+
+-  CRYPTO_ALG_TYPE_KPP Key-agreement Protocol Primitive (KPP) such as
+   an ECDH or DH implementation
+
+-  CRYPTO_ALG_TYPE_HASH Raw message digest
+
+-  CRYPTO_ALG_TYPE_SHASH Synchronous multi-block hash
+
+-  CRYPTO_ALG_TYPE_AHASH Asynchronous multi-block hash
+
+-  CRYPTO_ALG_TYPE_RNG Random Number Generation
+
+-  CRYPTO_ALG_TYPE_AKCIPHER Asymmetric cipher
+
+-  CRYPTO_ALG_TYPE_PCOMPRESS Enhanced version of
+   CRYPTO_ALG_TYPE_COMPRESS allowing for segmented compression /
+   decompression instead of performing the operation on one segment
+   only. CRYPTO_ALG_TYPE_PCOMPRESS is intended to replace
+   CRYPTO_ALG_TYPE_COMPRESS once existing consumers are converted.
+
+The mask flag restricts the type of cipher. The only allowed flag is
+CRYPTO_ALG_ASYNC to restrict the cipher lookup function to
+asynchronous ciphers. Usually, a caller provides a 0 for the mask flag.
+
+When the caller provides a mask and type specification, the caller
+limits the search the kernel crypto API can perform for a suitable
+cipher implementation for the given cipher name. That means, even when a
+caller uses a cipher name that exists during its initialization call,
+the kernel crypto API may not select it due to the used type and mask
+field.
+
+Internal Structure of Kernel Crypto API
+---------------------------------------
+
+The kernel crypto API has an internal structure where a cipher
+implementation may use many layers and indirections. This section shall
+help to clarify how the kernel crypto API uses various components to
+implement the complete cipher.
+
+The following subsections explain the internal structure based on
+existing cipher implementations. The first section addresses the most
+complex scenario where all other scenarios form a logical subset.
+
+Generic AEAD Cipher Structure
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following ASCII art decomposes the kernel crypto API layers when
+using the AEAD cipher with the automated IV generation. The shown
+example is used by the IPSEC layer.
+
+For other use cases of AEAD ciphers, the ASCII art applies as well, but
+the caller may not use the AEAD cipher with a separate IV generator. In
+this case, the caller must generate the IV.
+
+The depicted example decomposes the AEAD cipher of GCM(AES) based on the
+generic C implementations (gcm.c, aes-generic.c, ctr.c, ghash-generic.c,
+seqiv.c). The generic implementation serves as an example showing the
+complete logic of the kernel crypto API.
+
+It is possible that some streamlined cipher implementations (like
+AES-NI) provide implementations merging aspects which in the view of the
+kernel crypto API cannot be decomposed into layers any more. In case of
+the AES-NI implementation, the CTR mode, the GHASH implementation and
+the AES cipher are all merged into one cipher implementation registered
+with the kernel crypto API. In this case, the concept described by the
+following ASCII art applies too. However, the decomposition of GCM into
+the individual sub-components by the kernel crypto API is not done any
+more.
+
+Each block in the following ASCII art is an independent cipher instance
+obtained from the kernel crypto API. Each block is accessed by the
+caller or by other blocks using the API functions defined by the kernel
+crypto API for the cipher implementation type.
+
+The blocks below indicate the cipher type as well as the specific logic
+implemented in the cipher.
+
+The ASCII art picture also indicates the call structure, i.e. who calls
+which component. The arrows point to the invoked block where the caller
+uses the API applicable to the cipher type specified for the block.
+
+::
+
+
+    kernel crypto API                                |   IPSEC Layer
+                                                     |
+    +-----------+                                    |
+    |           |            (1)
+    |   aead    | <-----------------------------------  esp_output
+    |  (seqiv)  | ---+
+    +-----------+    |
+                     | (2)
+    +-----------+    |
+    |           | <--+                (2)
+    |   aead    | <-----------------------------------  esp_input
+    |   (gcm)   | ------------+
+    +-----------+             |
+          | (3)               | (5)
+          v                   v
+    +-----------+       +-----------+
+    |           |       |           |
+    |  skcipher |       |   ahash   |
+    |   (ctr)   | ---+  |  (ghash)  |
+    +-----------+    |  +-----------+
+                     |
+    +-----------+    | (4)
+    |           | <--+
+    |   cipher  |
+    |   (aes)   |
+    +-----------+
+
+
+
+The following call sequence is applicable when the IPSEC layer triggers
+an encryption operation with the esp_output function. During
+configuration, the administrator set up the use of seqiv(rfc4106(gcm(aes)))
+as the cipher for ESP. The following call sequence is now depicted in
+the ASCII art above:
+
+1. esp_output() invokes crypto_aead_encrypt() to trigger an
+   encryption operation of the AEAD cipher with IV generator.
+
+   The SEQIV generates the IV.
+
+2. Now, SEQIV uses the AEAD API function calls to invoke the associated
+   AEAD cipher. In our case, during the instantiation of SEQIV, the
+   cipher handle for GCM is provided to SEQIV. This means that SEQIV
+   invokes AEAD cipher operations with the GCM cipher handle.
+
+   During instantiation of the GCM handle, the CTR(AES) and GHASH
+   ciphers are instantiated. The cipher handles for CTR(AES) and GHASH
+   are retained for later use.
+
+   The GCM implementation is responsible to invoke the CTR mode AES and
+   the GHASH cipher in the right manner to implement the GCM
+   specification.
+
+3. The GCM AEAD cipher type implementation now invokes the SKCIPHER API
+   with the instantiated CTR(AES) cipher handle.
+
+   During instantiation of the CTR(AES) cipher, the CIPHER type
+   implementation of AES is instantiated. The cipher handle for AES is
+   retained.
+
+   That means that the SKCIPHER implementation of CTR(AES) only
+   implements the CTR block chaining mode. After performing the block
+   chaining operation, the CIPHER implementation of AES is invoked.
+
+4. The SKCIPHER of CTR(AES) now invokes the CIPHER API with the AES
+   cipher handle to encrypt one block.
+
+5. The GCM AEAD implementation also invokes the GHASH cipher
+   implementation via the AHASH API.
+
+When the IPSEC layer triggers the esp_input() function, the same call
+sequence is followed with the only difference that the operation starts
+with step (2).
+
+Generic Block Cipher Structure
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Generic block ciphers follow the same concept as depicted with the ASCII
+art picture above.
+
+For example, CBC(AES) is implemented with cbc.c, and aes-generic.c. The
+ASCII art picture above applies as well with the difference that only
+step (4) is used and the SKCIPHER block chaining mode is CBC.
+
+Generic Keyed Message Digest Structure
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Keyed message digest implementations again follow the same concept as
+depicted in the ASCII art picture above.
+
+For example, HMAC(SHA256) is implemented with hmac.c and
+sha256_generic.c. The following ASCII art illustrates the
+implementation:
+
+::
+
+
+    kernel crypto API            |       Caller
+                                 |
+    +-----------+         (1)    |
+    |           | <------------------  some_function
+    |   ahash   |
+    |   (hmac)  | ---+
+    +-----------+    |
+                     | (2)
+    +-----------+    |
+    |           | <--+
+    |   shash   |
+    |  (sha256) |
+    +-----------+
+
+
+
+The following call sequence is applicable when a caller triggers an HMAC
+operation:
+
+1. The AHASH API functions are invoked by the caller. The HMAC
+   implementation performs its operation as needed.
+
+   During initialization of the HMAC cipher, the SHASH cipher type of
+   SHA256 is instantiated. The cipher handle for the SHA256 instance is
+   retained.
+
+   At one time, the HMAC implementation requires a SHA256 operation
+   where the SHA256 cipher handle is used.
+
+2. The HMAC instance now invokes the SHASH API with the SHA256 cipher
+   handle to calculate the message digest.